American Standard 7074030.002 Installation guide

Category
Sanitary ware
Type
Installation guide
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2016
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1 2
M965768 (9/16)
COLONY
®
PRO
Single Control Kitchen Faucet
With Side Spray
INSTALLATION
INSTRUCTIONS
7074.000
7074.010
7074.020
7074.030
7074.040
Certied to comply with ANSI A112.18.1M
INSTALL FAUCET WATER SUPPLY CONNECTIONS
CAUTION
Turn off water at
main supply
Install FAUCET (1) on sink. (No sealant is required
unless mounting deck on SINK is uneven)
Secure FAUCET (1) with ATTACHMENT NUT (2)
supplied. (HAND TIGHTEN).
Plumbers' Putty or CaulkingAdjustable WrenchChannel LocksPhillips Screwdriver
1
2
1
3
2
COLD
HOT
SHUT OFF
VALVE
3/8" COMPRESSION
NOTE: FLEXIBLE HOSES (1, 2) on FAUCET (3) are (24") in length
from base of faucet. If longer supply length is required installer
must purchase adapters and additional supplies to complete
connections. FLEXIBLE HOSES MAY BE REMOVED IF USE OF
3/8" O.D. BULL-NOSE RISERS IS REQUIRED.
IMPORTANT: If SUPPLY HOSES (1, 2) are to long, loop as
illustrated to avoid kinking. (Do not cut Flexible Hoses 1, 2)
Connection on FLEXIBLE HOSES (1, 2) are 3/8" compression.
Connect LEFT SUPPLY (1) to
Hot shut off valve and RIGHT
SUPPLY (2)
to Cold shut
off valve.
Use adjustable
wrenches to tighten
connections.
Do not over tighten.
- 2 -
3
M965768 (9/16)
Feed SPRAY HOSE (1) through SPRAY HOLDER (2)
and attach COUPLING NUT (3) of HOSE (1) to
HOSE ADAPTOR (4).
FITTING WITH SPRAY
4
CONNECT SPRAY HOSE & INSTALL WEIGHTS
5
SERVICE
If faucet drips proceed as follows:
Turn VALVE in OFF position.
If faucet drips, operate handle several times from
“off” to “on”. Do not apply excessive force.
Clogged CARTRIDGE inlets may cause reduced
ow in “full on” hot or cold. To clean inlets,
rst turn off water supply, then:
Remove HANDLE (1), CAP (2), MOUNTING
SCREWS (5), ADAPTER (6), and CARTRIDGE (3).
Clean inlets and MANIFOLD (4). Reassemble
CARTRIDGE (3), alternately tightening screws.
Replace CAP and HANDLE. Check ow.
Remove AERATOR. With handles in OFF
position, turn on water supplies and check
all connections for leaks.
Operate both HANDLES to ush water lines
thoroughly. Rotate SPOUT in both directions.
Replace AERATOR.
Direct SPRAY HEAD into sink and activate
SPRAY. Check HOSE connections for leaks.
2
1
4
3
AERATOR
1
2
3
4
6
5
- 3 -
M965768 (9/16)
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
STAINLESS STEEL 075
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER.
DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH,
ABRASIVES, HARSH CLEANERS,
OR A CLOTH WITH A COARSE SURFACE.
HOT LINE FOR HELP
For toll-free information and answers to your questions,
call: 1-800-442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
M962146-0070A
MOUNTING KIT
M970200-YYY0A
HANDLE KIT
M907314-YYY0A
CAP
M918511-0070A
CARTRIDGE SCREWS
M951483-0070A
CARTRIDGE
M922909-0070A
AERATOR
M907203-YYY0A
SPRAY HOLDER
042850-0070A
DIVERTER
M970198-YYY0A
ESCUTCHEON &
PUTTY PLATE KIT
WITH SPRAY
(7074.030)
M970199-YYY0A
ESCUTCHEON &
PUTTY PLATE KIT
WITHOUT SPRAY
(7074.000)
M906617-0070A
ATTACHMENT NUT
065800-0070A
ATTACHMENT NUT
M953673-YYY0A
HANDSPRAY & HOSE
M964368-0070A
HANDLE SCREW KIT
M911193-0070A
ADAPTER
M907202-YYY0A
ESCUTCHEON
(7174.020)
MODEL NUMBER
7074.000 7074.010
7074.020 7074.030
7074.040
COLONY
®
PRO
Single Control Kitchen
Faucet With Side Spray
  • Page 1 1
  • Page 2 2
  • Page 3 3

American Standard 7074030.002 Installation guide

Category
Sanitary ware
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI