1.
Power on the camera and connect to your router
a)
Plug the camera into the electric power outlet
cable in one of the LAN ports of the
b)
After a short pause, the camera will shake its head and begin to self
light turns green,
after self
2. D
ownload and install
a)
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “Ouvis” and install the Ouvis app. That looks like this:
iOS
b)
Open the app and you will be on the “Home Page”
3. Search and
add the camera
a) Click "Add Device"
to open the
MODEL: Ouvis VZ1
Power on the camera and connect to your router
Plug the camera into the electric power outlet
, and
connect one end of the Ethernet
cable in one of the LAN ports of the router, and the other end in the back of the camera
After a short pause, the camera will shake its head and begin to self
-
test
after self
-checking, the indicator light blinks itself.
ownload and install
the Ouvis app
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “Ouvis” and install the Ouvis app. That looks like this:
Android
Open the app and you will be on the “Home Page”
.
add the camera
to open the
"Add Device" page.
connect one end of the Ethernet
router, and the other end in the back of the camera
.
test
, the indicator
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
,
search for the word “Ouvis” and install the Ouvis app. That looks like this:
b) Click "LAN Search"
to search all online
c)
The app will find “WIFICAM” and its Device ID #. Click on “WIFICAM”.
d) On this page
, leave everything as is. User is admin
remain blank (do NOT put anything here), and click “Done”
to search all online
Ouvis cameras in LAN.
The app will find “WIFICAM” and its Device ID #. Click on “WIFICAM”.
, leave everything as is. User is admin
and the default Password should
remain blank (do NOT put anything here), and click “Done”
.
and the default Password should
e)
You should now see “WIFICAM” on the “Home Page” and it will show “On Line”. Click on
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full
watching live video. By swiping the screen in all directions, you will be able to move the
head of the camera.
You should now see “WIFICAM” on the “Home Page” and it will show “On Line”. Click on
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full
watching live video. By swiping the screen in all directions, you will be able to move the
You should now see “WIFICAM” on the “Home Page” and it will show “On Line”. Click on
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full
screen and
watching live video. By swiping the screen in all directions, you will be able to move the
4. Configure the Wi-
Fi connection of the camera
a)
Make sure your smartphone is on Wi
b)
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page
c) Click on the “Wi-
Fi Setting
network hotspots near you
Fi connection of the camera
Make sure your smartphone is on Wi
-
Fi (and connected to the 2.4G band
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page
Fi Setting
”, and then click “Wi-Fi Network List” to
search all wireless
network hotspots near you
.
Fi (and connected to the 2.4G band
of your router).
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page
.
search all wireless
d)
From the network list, click on the same exact network that your smartphone is
connected to.
e) Then you must
input the correct Wi
Password” box
that openned up
From the network list, click on the same exact network that your smartphone is
input the correct Wi
-Fi password of your Wi-
Fi network,
that openned up
.
From the network list, click on the same exact network that your smartphone is
Fi network,
in the “Wi-Fi
f) Now, click “Done” and the camera will reboot automatically, and it will shake its head
and begin to self-check. The indicator light turns green, after self-checking, the indicator
light blink itself. After it stops moving, remove the Ethernet cord, and on the “Home Page”
it should show “WIFICAM ONLINE” and the camera will now be wireless. However, if
WIFICAM does not show “On Line”, you probably entered the wrong Wi-Fi password.
Connect the Ethernet cord back into the camera, and when it shows “On Line”, go back
to step 4 and repeat the steps again.
5. Creating the camera password to ensure your privacy
a) On the “Home Page” there is a yellow warning icon to the right of the “Home Page” to
remind you to create a password for your camera. Click on it and it opens the “User
Setting” page.
b) On this page, you can set the new Administrator password, and then click "Done" to save
the new password, and the camera will reboot and shake its head.
c) After it stops moving, it will automatically login with the new administrator password, and
you will now notice that the yellow warning icon does not exist anymore.
For online support and details of the functions and features of this camera, go to:
ouvis.zendesk.com
Support email: support@ouvis.online
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Swann NVR-7072 User manual
-
-
Q-See QC304 Remote Monitoring Guide
-
-
Digimerge DN308P28 User manual
-
-
Digimerge IP N8A32K44 User manual
-
Foscam FI9821P User manual
-
Samsung SmartCam SNH-E6411BN User manual
-
Ebode IPV38P2P User manual