Yosemite Home Decor BWRS30W Installation guide

Type
Installation guide

This manual is also suitable for

Yosemite Home Decor BWRS30W is a range hood that can be used for odor extraction or air filtering and recycling. It has two independent controls or pressure modulation on the control button. The device has two 40W lamps and a metallic filter that should be washed every 30 days or cleaned in a washing machine. The absorber plate should be 60cm above electric burners or 80cm above gas burners. The device must be connected to a 120mm diameter pipe for air extraction.

Yosemite Home Decor BWRS30W is a range hood that can be used for odor extraction or air filtering and recycling. It has two independent controls or pressure modulation on the control button. The device has two 40W lamps and a metallic filter that should be washed every 30 days or cleaned in a washing machine. The absorber plate should be 60cm above electric burners or 80cm above gas burners. The device must be connected to a 120mm diameter pipe for air extraction.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Yosemite Home Decor BWRS30W Installation guide

Type
Installation guide
This manual is also suitable for

Yosemite Home Decor BWRS30W is a range hood that can be used for odor extraction or air filtering and recycling. It has two independent controls or pressure modulation on the control button. The device has two 40W lamps and a metallic filter that should be washed every 30 days or cleaned in a washing machine. The absorber plate should be 60cm above electric burners or 80cm above gas burners. The device must be connected to a 120mm diameter pipe for air extraction.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI