Asus ROG ADDRESSABLE LED STRIP-60CM User manual

E14862

ROG Addressable LED Strip Information Guide

This is an information update for installing your ROG addressable LED strip to your

motherboard.

The diagrams are for reference only. The motherboard layout may vary with models, but

the installation steps are the same for all models.

To install your ROG Addressable LED strip using an extension cable:

1. Connect the 3-pin connector of your addressable LED extension cable to your ROG

addressable LED strip.

2. Connect the addressable LED extension cable to the 3-1 pin ADD_HEADER on your

motherboard.

This manual is also suitable for