Knaack 1010 Owner's manual

Type
Owner's manual
1 70030-1PK POWER PASS™ Grommet, 1 1000, 1010, 1020
2 70024 Latch Handle 1000, 1010, 1020
3 70025 Latch Rod 1000, 1010
 4 70026 LiftRings,setof4 Setof4ts1000,1010,1020
5 70028 Catch 1010
6 7683 Caps & Plugs Kit 1000, 1010, 1020 as well as other products. Partial contents needed.
7 70022-XXX Keys, set of 4 1000, 1010, 1020
8 71022-XXX Lock Cylinder 1000, 1010, 1020
9 70062 Cover *NOTE, WELDING REQUIRED 1010
10 600 Accessory Casters - set of 4 Load Rating 3280 Lbs. Fits 1000, 1010, 1020
10 695 Accessory Casters - set of 4 Load Rating 2600 Lbs. Fits 1000, 1010, 1020
11 7014 Skid *NOTE, WELDING REQUIRED 1000, 1010, 1020
12 953-1CN Aerosol Paint, 1 can (not shown) Genuine KNAACK® Tan trademarked color
ITEM PART No. DESCRIPTION FITS MODEL #
FOR REPLACEMENT PARTS GO TO WWW.KNAACK.COM
MONSTER BOX™
MODEL 1010
REPLACEMENT PARTS
© 2008 Knaack L.L.C., 420 E. Terra Cotta Ave. Crystal Lake, IL 60014 Rev. 8/08
For Customer Service
call toll free:
1-800-456-7865
JOBSITE EQUIPMENT
REGISTER YOUR KEY CODE ONLINE at
www.knaack.com or at 1-866-KNAACK1.
MONSTER BOX™ is a maximum security product. If all
keys are lost, without a record of your key code it is
possible to lock yourself out of your MONSTER BOX™.
70028
Accessory Caster Sets
70030-1PK
Back side of all
Monster Boxes
7
Monster Boxes
70024 71022-XXX
On all
28
1
5
7683
6
10
70026
Set of 4
4
9
70022-XXX
11
70025
3
*NOTE, WELDING BY A CERTIFIED WELDER
REQUIRED ON SOME REPLACEMENT PARTS.
Thepartsnotedrequireweldingbyacertiedwelder
and some touchup paint over newly welded areas.
Knaack LLC assumes no legal responsibility
for any welding done outside its factory. All
warranties will be voided.
600 or 695
  • Page 1 1

Knaack 1010 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI