2. SCE
  3. SCE-20XEL2108LP

SCE SCE-20XEL2108LP Installation Information

  • Hello, I've reviewed the installation instructions for the Saginaw Control & Engineering Wallmount EL-LPPL dead front panels. This document outlines the installation process, including mounting, material specifications, and dimensional calculations. I'm ready to answer your questions about the product.
  • What is the swing capability of the dead front panels?
    What material are the dead front panels constructed from?
    How are the dead front panels mounted?
    How to calculate dead front panel height?
    How to calculate dead front panel width?
2.50 FROM PANEL FACE
TO INSIDE OF THE DOOR
APROX. 2.50
FROM THE
DOOR OPENING
APROX. 2.50
FROM THE
DOOR OPENING
.50 FROM
OPENING
SAGINAW CONTROL & ENGINEERING
DEAD FRONT, WALLMOUNT EL-LPPL, INSTALLATION
NOTES:
1. DEAD FRONT PANELS ARE ABLE TO SWING 120
2. CONSTRUCTION IS 14GA. CARBON STEEL.
3. PANELS BOLT BEHIND EXISTING CONCEALED HINGES
AND REQUIRE 1 ADDITIONAL HOLE DRILLED PER CATCH.
DEAD FRONT PANEL HEIGHT = ENCLOSURE OPENING - 1.50
DEAD FRONT PANEL WIDTH = ENCLOSURE OPENING - 0.693
DRILL .218
HOLE FOR
EACH CATCH
VIEW SHOWN WITH BOTTOM REMOVED
A
B
SCE
CONCEALED
HINGE
DOOR
DEAD FRONT
PANEL
USE EXISTING HINGE
SCREWS TO SECURE
BOTH DEAD FRONT
AND DOOR HINGES
SCE
CONCEALED
HINGE
ENCLOSURE
JAM NUTS DETAIL A
CATCH
BRACKET
10-32
BUTTON
HEAD TORX
SCREW
SEALING
WASHER
ENCLOSURE
DEAD FRONT
PANEL
DETAIL B
EXPLODED HINGE
DETAIL
/