Actidata 44042110 Datasheet

Actidata
Brand
Actidata
Model
44042110
Category
Tape auto loaders & libraries
Type
Datasheet

This manual is also suitable for

Actidata 44042110 is a high-performance LTO tape library designed to meet the demanding data storage needs of businesses of all sizes. With its high data density, low rack space consumption, and advanced features, the Actidata 44042110 is an ideal solution for unattended backup, archive, and disaster recovery.

The Actidata 44042110 supports up to four LTO-4 tape drives and can store up to 76.8TB of data in a 4U rack space. The library's efficient design allows for easy cartridge management, with four removable magazines and a 3-way mailslot for quick import/export operations.

Actidata 44042110 is a high-performance LTO tape library designed to meet the demanding data storage needs of businesses of all sizes. With its high data density, low rack space consumption, and advanced features, the Actidata 44042110 is an ideal solution for unattended backup, archive, and disaster recovery.

The Actidata 44042110 supports up to four LTO-4 tape drives and can store up to 76.8TB of data in a 4U rack space. The library's efficient design allows for easy cartridge management, with four removable magazines and a 3-way mailslot for quick import/export operations.

actiLib Library 4U LTO:
The actiLib Library 4U Tape Libraries meet the demanding data storage needs including unattended backup, archive,
and disaster recovery for a wide range of businesses.
The actiLib Library offer features like intelligent Robotic Control Unit through drive LUN addressing, Browser-based
Remote Management as well as integrated barcode reader and compatibility to standard backup software suites.
Features:
• High Data Density / Low Rack Space Consumption
The efficient design allows for storing up to 48 Cartridges and
up to 76.8 TBytes (compressed at 2:1) in 4 U height for factor
of a 19 inch Rack
• Easy to integrate into existing infrastructures
Equipped with remote management as standard, the
library allows the administrator to easily and efficiently perform
configuration steps from the desktop without having to be
on-site.
• Barcode Reader
Through the use of the integrated Barcode reader, initialisation
times are reduced and cartridges can be easily identified for
off-site storage and retrieval.
• Cartridge Magazines and Mailslot
All cartridges are kept in four removable magazines and to
facilitate uninterrupted operations, a 3- way mailslot allows for
quick import/export operations.
• Easy Maintenance
In the event of component failure, the power supply, library
controller card, tape drives and robot can be replaced on-site
without having to remove the library from the rack. Down-time
is greatly minimised by this service-friendly layout.
We care about data
actiLib Library 4U LTO
The 4U’s high slot count, small form-factor and flexibility of operations
enable it to be deployed in environments that previously demanded
mid-range Libraries. Operational parameters like the magazines, 3-way
mailslot, on-site replaceable components and hot-swap tape drives are
of great benefit to reliability and smooth data protection.
General
Drive Type LTO-4 SCSI, SAS and Fibre-channel
Media Type Ultrium 3 and Ultrium 4
Media Compatibility LTO-4 (R/W), LTO-3 (R/W), LTO-2 (R)
SCSI interface Ultra 320 LVD SCSI
Form-Factor 19" Rackmount (4U height)
Configuration
Number of Drives up to 4 half height and 2 full height drives (hot-swap capable)”
Number of Slots 48
Number of Mail Slots 3
Number of Magazines 4
Capacity
Native capacity (LTO4) 38.4 TB
Compressed Capacity (max.) 76,8 TB (at a 2:1 Compression Ratio)
Speed
Data transfer up to 2,3TB/hour native (4x LTO4 drives)
Reliability
Robotics MCBF 500.000 swaps
Access and Operation
Management Interfaces - Password-protected LCD Menu for Drives, Tapes, Configuration as well as Diagnostics
- Remote Management Utility (RMU) with Fast Ethernet (RJ45) Connection for
Browser-based set-up.
Host Interface Ultra 320, 3Gb/s SAS or 4gb/s Fibre-channel
Accessories
Including rack mount kit and accessories depending of configuration
Power Supply
Number of PSU 1 or 2 (redundant Power Supply)
Voltage AC 100-240 V (50-60 Hz)
Power Consumption 220 Watts
Environmentals
Noise Emissions <= 5,8 B ("quiet office")
Max. allowable vibrations 0,21 Grms 5-500 Hz (operating)
Temperature 10 - 35 °C (operating)
Humidity 20 - 80 % (non-condensing)
Dimensions
Width 447,5 mm
Depth 740 mm
Height 175,2 mm
Weight (no tapes) 20 kg (without drive); 28 kg (with two LTO-4 drives)
GmbH Alter Hellweg 111 44379 Dortmund Email: [email protected] Web: www.actidata.com
© actidata GmbH 2009, actidata is a registered trademark of actidata GmbH.
We care about data
  • Page 1 1
  • Page 2 2

Actidata 44042110 Datasheet

Actidata
Brand
Actidata
Model
44042110
Category
Tape auto loaders & libraries
Type
Datasheet
This manual is also suitable for

Actidata 44042110 is a high-performance LTO tape library designed to meet the demanding data storage needs of businesses of all sizes. With its high data density, low rack space consumption, and advanced features, the Actidata 44042110 is an ideal solution for unattended backup, archive, and disaster recovery.

The Actidata 44042110 supports up to four LTO-4 tape drives and can store up to 76.8TB of data in a 4U rack space. The library's efficient design allows for easy cartridge management, with four removable magazines and a 3-way mailslot for quick import/export operations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents