Bowers & Wilkins FP33596 Datasheet

Category
Headphones
Type
Datasheet

This manual is also suitable for

P5
Mobile Hi-Fi Headphones
Noise isolation A closed-back design with
rigid metal faceplates and sealed earpads
ensures that all the detail and dynamic range of
your music is kept intact, with minimum outside
interference. At the same time, you’ll hear just
enough ambient sound to preserve a sense of
place. Perfect for listening to music on the go.
Made for iPod
®
No-one knows how to get
great sound out of your iPod better than
Bowers & Wilkins, makers of the award-winning
Zeppelin sound dock. P5 gives you the same
incredible sound quality on the move, and
comes with an Apple-approved cable, for
speech and device control, perfect for iPhone
.
Designed for comfort Fine-grained, supple
leather helps the make P5 headphones feel
luxuriously comfortable, even during long
listening periods.
Concert for one
Get closer to your favourite music wherever
you are with P5, the noise-isolating headphones
from Bowers & Wilkins. Close to 50 years of
innovation in acoustic design is wrapped up in
the P5. And thanks to its natural, lifelike sound
and a luxuriously comfortablet, it makes longer
listening sessions a pleasure. Think of it as your
own personal concert – to go.
Listen for longer Gimmicky effects like
exaggerated bass or artificially enhanced treble
quickly become tiring with extended listening.
The P5’s natural audio performance brings
you close to the sound of the original recording,
as you were meant to hear it. Which means
you can enjoy your favourite music for longer.
Life-long comfort P5 is very easy on the ears.
The ergonomic design is married to a headband
and earpads crafted from the finest-quality
sheep’s leather from New Zealand. Durable and
hardwearing, yet remarkably soft and supple,
it makes long listening sessions feel more
comfortable than ever.
P5 specifications
Technical features
Description
Drive units
Impedance
Frequency range
Amplifier power output
Distortion
Sensitivity
Inputs
Height
Width
Depth
Weight
Finish
Mic & remote control cable included*
Mylar diaphragm
Closed back for noise isolation
Fold flat
Single sided detachable/changeable cable
Adjustable headband
Carry case
2.5mm/¼" jack adaptor included
Memory foam earcushions
Real sheep’s leather used throughout
Mobile Hi-Fi Headphone with noise isolation
2x ø40mm
26 ohms
10Hz to 20kHz
50mW
Below 1%
115dB/V at 1kHz
Headphone: 2.5mm minijack
3.5mm jack analogue
180mm
150mm
35mm folded flat, 60mm in service
195g
Enclosure: Real leather and metal
01/10 PU23043
www.bowers-wilkins.com iPod and iPhone are trademarks
of Apple Inc. registered in the
US and other countries.
Copyright © B&W Group Ltd.
Design Thomas Manss & Company.
Printed in the UK.
* The remote and mic are supported by
iPhone 3GS, iPod nano (4th and 5th
generation), iPod touch (2nd generation),
iPod classic (120GB/160GB). The remote
is supported by iPod shuffle (3rd generation).
Requires latest iPod Software.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Bowers & Wilkins FP33596 Datasheet

Category
Headphones
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI