Vanco HDMIEX50 allows for extending HDMI and control signals over a single Cat5e/6 cable up to 164ft/50m to a compatible display. It supports IR to control either the source from the sink/display remotely. The HDMI Loop-out port on the transmitter acts as a splitter to go to multiple displays. The EQ settings on the receiver are easy to adjust based on cabling distance while the EDID settings on the transmitter allow for EDID to be managed through either the HDMI Loop-out or the HDMI output of the receiver.
Vanco HDMIEX50 allows for extending HDMI and control signals over a single Cat5e/6 cable up to 164ft/50m to a compatible display. It supports IR to control either the source from the sink/display remotely. The HDMI Loop-out port on the transmitter acts as a splitter to go to multiple displays. The EQ settings on the receiver are easy to adjust based on cabling distance while the EDID settings on the transmitter allow for EDID to be managed through either the HDMI Loop-out or the HDMI output of the receiver.
Vanco HDMIEX50 allows for extending HDMI and control signals over a single Cat5e/6 cable up to 164ft/50m to a compatible display. It supports IR to control either the source from the sink/display remotely. The HDMI Loop-out port on the transmitter acts as a splitter to go to multiple displays. The EQ settings on the receiver are easy to adjust based on cabling distance while the EDID settings on the transmitter allow for EDID to be managed through either the HDMI Loop-out or the HDMI output of the receiver.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI