Intermec PB21 User manual

Category
Label printers
Type
User manual

This manual is also suitable for

PB
21
|
PB
31
Mobile Receipt Printer
User Guide
ii PB21 and PB31 Mobile Receipt Printer User Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2009–2013 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
PB21 and PB31 Mobile Receipt Printer User Guide iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number
Date Description of Change
004 4/2013 Updated the section about the card readers. Updated
the procedure to set up Bluetooth communications.
Added information about the AC18 charger to the
troubleshooting table. Updated media specifications
in Appendix A. Added the cleaning pen to the list of
accessories.
003 5/2011 Revised battery information.
Added procedures for configuring wireless network
with PrintSet.
002 1/2010 Revised to add information for the magnetic stripe
reader, smart card reader, and upgrading the firmware.
iv PB21 and PB31 Mobile Receipt Printer User Guide
Contents
PB21 and PB31 Mobile Receipt Printer User Guide v
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
1
Using the PB21 and PB31 Mobile Receipt Printer. . . . . . . . . . . . . . . . . . . . . . . . 1
Introducing the PB21 and PB31 Mobile Receipt Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What’s New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Identifying the Parts of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Understanding the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Understanding the Printer Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Changing the Printer Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Understanding the Printer Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Understanding the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Charging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Understanding the Battery Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Extending Battery Life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Loading Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the Card Readers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Using the Magnetic Stripe Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Understanding the Display Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Understanding Ready Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Understanding Information Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Understanding Pause Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Understanding Setup Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Understanding Error Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Contents
vi PB21 and PB31 Mobile Receipt Printer User Guide
Understanding Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing Configuration Settings from the Display . . . . . . . . . . . . . . . . . . . . . . . . . 24
Printing a Test Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2
Configuring the PB21 and PB31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connecting the Printer to Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Connecting the Printer Through the USB Interface . . . . . . . . . . . . . . . . . . . . . . . . .28
Connecting the Printer Through the Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting the Printer to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting Up Bluetooth Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting Up 802.11 Radio Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Configuring Wireless Printing Using IPL. . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Configuring Wireless Printing Using Fingerprint . . . . . . . . . . . . . . . . . . . 39
Configuring the Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing Wi-Fi Configuration Settings from PrintSet . . . . . . . . . . . . . . . . . . . . . . 42
Changing Configuration Settings Using the Command Line . . . . . . . . . . . . . . . .42
Changing Configuration Settings from the Printer Home Page . . . . . . . . . . . . . . 43
Changing Configuration Settings Using SmartSystems . . . . . . . . . . . . . . . . . . . . . 44
Upgrading the Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Upgrading the Printer Firmware Using PrintSet . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Upgrading the Printer Firmware Using the Printer Home Page . . . . . . . . . . . . . . . 46
Upgrading Printer Firmware Using SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Upgrading the Printer Firmware Using a Communications Program . . . . . . . . . 48
Downloading Fonts and Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3
Troubleshooting and Maintaining the PB21 and PB31 . . . . . . . . . . . . . . .53
Troubleshooting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Contacting Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Understanding Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Troubleshooting Printer Problems and Finding Solutions . . . . . . . . . . . . . . . . . . . 56
Troubleshooting Communication Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using the Line Analyzer in Fingerprint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using Dump Mode in IPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Resetting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Contents
PB21 and PB31 Mobile Receipt Printer User Guide vii
Cleaning the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Cleaning the Printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cleaning the Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleaning the Printer Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Cleaning the Printer Media Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
A
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
RS-232 Serial Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
USB Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
B
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Factory Default Settings (Fingerprint Printers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Factory Default Settings (IPL Printers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Factory Default Settings (ESC/P Printers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
C
IPL and Fingerprint Setup Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
IPL Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Fingerprint Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
I
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Contents
viii PB21 and PB31 Mobile Receipt Printer User Guide
Before You Begin
PB21 and PB31 Mobile Receipt Printer User Guide ix
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can
be damaged if you do not follow the safety warnings and cautions.
This section explains how to identify and understand warnings,
cautions, and notes that are in this document.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec website at www.intermec.com and click Support >
Returns and Repairs > Warranty.
Web Support
Visit the Intermec website at www.intermec.com to download our
current manuals (in PDF).
A warning alerts you of an operating procedure, practice,
condition, or statement that must be strictly observed to avoid
death or serious injury to the persons working on the equipment.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to prevent
equipment damage or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Before You Begin
x PB21 and PB31 Mobile Receipt Printer User Guide
Visit the Intermec technical knowledge base (Knowledge Central) at
www.intermec.com and click Support > Knowledge Central to
review technical information or to request technical support for your
Intermec product.
Send Feedback
Your feedback is crucial to the continual improvement of our
documentation. To provide feedback about this manual, please
contact the Intermec Technical Communications department directly
Telephone Support
In the U.S.A. and Canada, call 1-800-755-5505.
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the
Intermec website, click About Us > Contact Us.
Who Should Read This Manual
This user guide is for the person who is responsible for installing,
configuring, and maintaining the PB21/PB31 printer.
This guide provides you with information about the features of the
PB21/PB31, and how to install, configure, operate, maintain, and
troubleshoot it.
Related Documents
Here are some related Intermec documents you may find useful:
Intermec Fingerprint Command Reference Manual
Intermec Fingerprint Developer’s Guide
Intermec Printer Language (IPL) Command Reference Manual
ESC/P Programmer’s Reference Manual
ZSim Programmer’s Guide
The Intermec website at www.intermec.com contains our documents
(as .pdf files) that you can download for free.
Before You Begin
PB21 and PB31 Mobile Receipt Printer User Guide xi
To download documents
1 Visit the Intermec website at www.intermec.com.
2 Click the Products tab.
3 Using the Products menu, navigate to your product page. For
example, to find the PB21 printer product page, click Printers
and Media > Mobile Printers > PB21.
4 Click the Manuals tab.
If your product does not have its own product page, click Support >
Manuals. Use the Product Category, the Product Family, and
Product to find your documentation.
Before You Begin
xii PB21 and PB31 Mobile Receipt Printer User Guide
1
1
Using the PB21 and PB31 Mobile Receipt
Printer
Use this chapter to familiarize yourself with the PB21 and
PB31 mobile receipt printer. This chapter contains these
sections:
Introducing the PB21 and PB31 Mobile Receipt Printer
Using the Batteries
Loading Media
Using the Card Readers
Understanding the Display Modes
Printing a Test Page
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
2 PB21 and PB31 Mobile Receipt Printer User Guide
Introducing the PB21 and PB31 Mobile Receipt
Printer
The PB21 and PB31 is a rugged mobile receipt printer that is designed
for use with Intermec mobile computers, Intermec vehicle mount
computers, and SF51 and SR61 scanners. The PB21 uses 50.8 mm (2
in) media and the PB31 uses 76.2 mm (3 in) media.
The PB21 and PB31 provides:
print resolution of 203 dpi.
print speeds of up to 101.6 mm per second (4 ips).
802.1 b/g or Bluetooth radio options.
Whats New
This version of the user guide includes these changes:
Updated the section about the card readers. See “Using the Card
Readers” on page 16.
Updated the procedure to set up Bluetooth communications. See
“Setting Up Bluetooth Communications” on page 31.
Updated the media specifications. See “Specifications” on
page 65.
Added the cleaning pen to the list of accessories. See
Accessories” on page 71.
Note: Unless otherwise noted, this manual uses the term “printer” to
refer to both the PB21 and PB31 printers.
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
PB21 and PB31 Mobile Receipt Printer User Guide 3
Identifying the Parts of the Printer
Use this illustration to familiarize yourself with some of the features
of the printer.
PB21 and PB31 : This illustration shows the important features of the printer. A
weather-resistant flap protects the communications ports and the external
power connector.
Understanding the Control Panel
The printer control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB21 and
PB31 printer.
Printer Control Panel
Ready-to-Work indicator
Smart card reader
Media cover
release button
Feed button
Standby
button
Information
button
Setup
button
Magnetic stripe
reader
OK
SETUP:
SER-COM
Standby button Info button
Feed button
Setup button
Ready-to-Work
indicator
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
4 PB21 and PB31 Mobile Receipt Printer User Guide
All of the buttons can act as “soft keys,” which means that the
function of each button depends on the state of the printer. A small
icon appears in the screen next to the button to indicate the function
it performs.
How to Use the PB21 and PB31 Buttons
Name Button Function
Feed Press to advance the media. The amount of media that
feeds is dependent on the type of media you are using.
It will advance by 5 mm (0.2 inch), or feed a configured
length of media based on your media and settings.
If the printer is printing, pressing this button causes
the printer to pause. Press the button again to resume
printing.
Setup Press to display the Setup menu. With ESC/P firmware,
press and hold to cancel printing.
Standby
(Power)
Press to put the printer in Standby mode. In Standby
mode, power to the radio, the display, and the
backlight are turned off.
Press to turn the printer back on and put in Ready
mode.
Info Press to display a summary of network connection
information and error conditions. Each setting in the
summary information displays on the screen for five
seconds.
In Fingerprint and IPL, press this button in Pause
mode to cancel the print job. The Info button is
unavailable in ESC/P.
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
PB21 and PB31 Mobile Receipt Printer User Guide 5
There is only one LED on the printer: the Ready-to-Work indicator.
Understanding the Soft Keys
Button Soft Keys Description
Moves up one level in the menu system. This soft
key appears in Setup mode.
Increases the value of a number when editing
settings such as an IP address. This soft key
appears in Setup mode.
Pauses the printing job. This icon appears only
when you are printing.
Exit Setup mode and return to Ready mode.
Moves through the settings at the same level in the
menu system.
Moves down one level in the menu system and
saves changes to a setting.
Exits a printing job or exits Information mode.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off One of several conditions:
The printer is in Standby mode.
The printer is in Info mode.
The printer is in Setup mode.
On The printer is turned on and operating.
Blinking One of several conditions:
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perform an
action. For a list of possible problems, see
Troubleshooting the Printer” on page 54.
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
6 PB21 and PB31 Mobile Receipt Printer User Guide
Understanding the Printer Language
Your printer comes with Intermec Printer Language (IPL),
Fingerprint, ESC/P, ZSim, and the ability to run any of the printer
command languages. The language you select affects the
functionality of the printer and how you interact with it.
The printer displays the current firmware type and version in Ready
mode.
Printer Running IPL Firmware
The first time you turn on the printer, you select the printer language
to run on the printer. The language you select automatically runs each
time you turn on your printer.
To select the printer language
1 Turn on the printer.
2 Press the appropriate button to select a language.
IPL 12.0.0
FP
IPL
ESCP
ZSIM
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
PB21 and PB31 Mobile Receipt Printer User Guide 7
Changing the Printer Language
You can change the printer command language using PrintSet, the
printer home page, a communications program like HyperTerminal,
or the printer display.
To change the printer language using PrintSet
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start PrintSet. The Intermec PrintSet dialog box appears.
3 Under My Printers, click the printer you want to work with.
4 Click Printer > Language Wizard. The Language Wizard appears.
5 Follow the prompts for the Language Wizard to change the
language for your printer.
To change the printer language using Fingerprint and a
communications program
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start a communications program like HyperTerminal.
3 Send the enable administrator rights command:
run “su -p pass admin
4 Send the run command to change the printer language to IPL:
setlanguage IPL -r
To change the printer language using IPL and a communications
program
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start a communications program like HyperTerminal.
3 Send the enable administrator rights command:
<STX><ESC>.y, su -p pass admin <ETX>
4 Send the run command to change the printer language:
<STX><EXC> .y,setlanguage FP -r<ETX>
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
8 PB21 and PB31 Mobile Receipt Printer User Guide
To change the printer language using ESC/P and a communications
program
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start a communications program like HyperTerminal.
3 Enter U-shell. Press the ESC key and type:
{SYS:USH}
4 Send the enable administrator rights command:
su -p pass admin
5 Send the run command to change the printer language:
setlanguage IPL -r
To change the printer language using the display and Fingerprint
1 Press the Setup button. The Setup menu system appears
2 Press until you reach Print Defs.
3 Press to enter the Print Defs menu system.
4 Press until you reach CMD Language.
5 Press to enter the CMD Language menu system.
6 Press until you see the language of you want to select.
7 Press to select the language.
8 Cold boot the printer:
a Remove the printer battery.
b Replace the printer battery.
c Turn the printer on.
To change the printer language using the display and IPL
1 Press the Setup button. The Setup menu system appears.
2 Press until you reach Test/Service.
3 Press to enter the Test/Service menu system.
4 Press until you reach CMD Language.
5 Press to enter the CMD Language menu system.
6 Press until you see the language of you want to select.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Intermec PB21 User manual

Category
Label printers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI