Renkforce GBIC [1x M.2 Key M plug - 1x M.2 Key E socket] Owner's manual

- 1 - 2-F150E-01A

M.2 E Key Module to M Key Socket Converter Board

1. Introduction

Utilize M.2 E Key or A-E Key WiFi, Bluetooth or Dual Band Wireless Module

in Embedded Computer M Key Socket!

1.1. Features

o M.2 NGFF type 2280-D5-M M Key notch 75Pin 80mm PCBA module

M.2 type 2230-D3-E E Key socket on board

Support 1630/2230/3030 M.2 E Key and A-E Key WiFi, Bluetooth and Dual Band

Wireless Module

PCIe x1 and USB2.0 signal interface

o 100% OS-transparent hardware bridge converter to support Windows, MAC and

Linux

o Supports operating temperature range: -40 - 80 ºC

Includes USB 5Pin-to-4Pin Cable for USB 2.0 signal from MB to USB 5pin header

2. Installation

1. Plug M.2 E Key or A-E Key wireless module into M.2 E Key socket

2. Push the other end of wireless module down and screw to PCB

3. Install Converter Adapter with wireless module into M.2 M Key socket and screw to

motherboard

4. Connect USB 2.0 signals from motherboard to on board 5Pin header via USB

5Pin-to-4Pin Cable