Dakota Digital VHX-70B-SKY Mounting Manual

Manual # 650496A

VHX-70B-SKY

Dakota Digital VHX Instrument Installation

For 1970-’72 Buick Skylark

Your new VHX-70B-SKY kit includes:

Installation

Installation Manuals

Control Box

36” CAT5 Cable

Universal Sender Pack

VHX Display

1. First, remove the stock gauge bezel from the dash. Retain all factory hardware for

reassembly

Switch Assembly

Manual # 650496A

2. Remove the stock gauges from the bezel by removing the nine (9) palnuts shown in grey

arrows and retain the hardware for reassembly.

3. With the stock gauges removed you can now mount the VHX system to the bezel by reusing eight

of the nine palnuts that mounted the factory gauges to the bezel.

Stock Gauges Removed

Manual # 650496A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

5. Re-install the gauge cluster to the dash using the factory hardware and refer to the main manual for

wiring instructions to complete the VHX installation.

4. Attach the provided CAT5 cable to the back of the VHX system and carefully route the open end

to the control box mounting location.