Promate SolarWay-2 User manual

Brand: Promate

Model: SolarWay-2

Type: User manual

User Guide

English

Introduction

A superior quality solar wall light that offers a contemporary design and reliable performance. This

light has a minimal feel and is perfect for use all year. With an IP65 rating, it has superior water

resistance. It will charge during the day and automatically activate at night when it detects motion.

Packaging Contents

• SolarWay-2

• User Guide

Specifications

• Battery Capacity: 2000mAH

• Battery Type: 18650 Li-ion

• Solar Panel Input: 5V/175mA

• LED Brightness: 160lm

• Motion Sensor Range: 3-5m

• Charging Time: 11-12 Hours

• Usage Time: 10 hours

English

Features

• Motion Sensor: The sensitive motion sensor detects motion from up to 16 feet

away. Even your little pets, like dogs, cats can activate the solar light sensor.

• Super Bright: 12 LED Design offers super bright lighting for a wide area and strong

illumination.

• Light Sensor: Turns on SolarWay-2 automatically at night and turns it off at dawn.

• Long-Lasting & Energy-Saving: SolarWay-2 takes 11-12 hours to charge and the light

lasts all night on a full charge.

• Easy to Install: Super easy to setup and install, add the needed light source for your

house without the added expense and trouble of installing electrical wire. You can

install it in any place that has direct sunshine.

• Water-Resistant: This LED light is water resistant and durable with hard plastic

which can withstand years of usage.

Precautions

Please read all safety instructions and warnings thoroughly before using this product.

Improper use of this product may result in damage to this or attached products.

1. Do not disassemble the product or attempt to fix it.

2. Do not attempt to replace any part of this product or battery inside.

3. Do not crush, puncture, dispose of in fire, short the contacts or expose the product

to water or other liquids.

4. Do not store or use the product in a high-temperature environment, including

intense sunlight or heat.

5. Avoid drops, bumps, abrasions and impacts.

6. If there is any reason to believe that there is damage to the product, discontinue

use immediately.

7. If you find that the product is too hot, is emitting an odour, or is deformed,

punctured or exhibits any suspicious or abnormal behaviour, discontinue use

immediately and contact our customer service.

English

Appearance & Interface Description

1. Solar Panel

2. Work Mode Button (Auto/On)

3. Motion Sensor(s)

4. LED Lights

5. Mounting Screw Hole(s)

6. Main Power Button (On/Off)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

English

Operation Instructions

1. Installation

Install the SolarWay-2 in an open area where the sun can shine on it in order to

maximize the use of its built-in rechargeable battery. Find an appropriate

mounting location that is free from cold or hot winds, lightning, and extremely

high temperatures. Use screws that are fixed on the wall for mounting.

2. Operation

Locate the Main Power Button located at the rear of the SolarWay-2. Keep it

turned OFF during transportation or whenever the SolarWay-2 is not in use.

Once you’re ready to start using it, turn the switch to ON.

Use the Work Mode Button to choose between two usage options: AUTO or ON.

The amount of time that the SolarWay-2 stays on will depend on how much

charge it carries. If set to AUTO, it can last all night if it is charged properly for

11-12 hours. If set to ON, it will run down the battery and may last anywhere

from a few minutes to a few hours depending on how much charge is available.

User discretion is advised.

English

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)

Your product is designed and manufactured with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end of-life should be

disposed of separately from your household waste.

Please dispose of this equipment at your local community waste

collection/recycling center.

This product complies with European safety and electrical interference directives

This product does not contain environmentally hazardous materials (lead, mercury,

cadmium, hexavalent chromium and brominated flammable agents: PBB and PBDE).

Spanish

Presentación y Descripción de la Interfaz

1. Panel solar

2. Botón de modo de trabajo (Auto/On)

3. Sensor(es) de Movimiento

4. Luces LED

5. Orificio(s) de tornillo(s) de montaje

6. Botón de encendido principal (On/Off)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

Spanish

Instrucciones de uso

1. Instación

Instale el SolarWay-2 en un área abierta donde el sol pueda iluminarlo para

maximizar el uso de su batería recargable incorporada. Encuentre un lugar de

montaje apropiado que esté libre de vientos fríos o calientes, rayos o

temperaturas extremadamente altas. Para el montaje, utilizar tornillos de fijación

a la pared.

2. Funcionamiento

Localice el botón principal de encendido situado en la parte posterior del

SolarWay-2. Manténgalo apagado durante el transporte o cuando el SolarWay-2

no esté en uso. Una vez que esté listo para comenzar a usarlo, ponga el

interruptor en ON.

Utilice el botón de modo de trabajo para elegir entre dos opciones de uso: AUTO

u ON. El tiempo que el SolarWay-2 permanezca encendido dependerá de la

cantidad de carga que lleve. Si se ajusta a AUTO, puede durar toda la noche si se

carga correctamente durante 11-12 horas. Si se establece en ON, se descargará la

batería y puede durar desde unos pocos minutos hasta unas pocas horas,

dependiendo de la cantidad de carga disponible. Se aconseja la discreción del

usuario.

French

Appearance & Interface Description

1. Panneau Solaire

2. Bouton Mode de Travail (Auto/On)

3. Détecteur(s) de Mouvement

4. Lumières LED

5. Trou (s) de vis de montage

6. Bouton d’Alimentation Principal (On/Off)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

French

Mode d’Emploi

1.Installation

Installez le SolarWay-2 dans un espace ouvert exposé au soleil afin de

maximiser l’utilisation de sa batterie rechargeable. Trouvez un emplacement

de fixation approprié où il n’y ait ni courants d’air froid ou chaud, ni risque de

foudre ni températures extrêmement élevées. Utilisez les vis qui sont fixées

sur le mur pour le montage.

2.Fonctionnement

Localisez le Bouton d’Alimentation Principal situé à l’arrière du SolarWay-2.

Gardez-le éteint pendant le transport ou lorsque le Solar Way-2 n’est pas

utilisé. Lorsque vous souhaiterez l’utiliser, placez l’interrupteur sur ON.

Utilisez le Bouton de Mode de Travail pour choisir entre deux options

d’utilisation : AUTO ou ON. L’autonomie d’utilisation du SolarWay-1 dépend de

la charge qu’il contient. S’il est sur le mode AUTO, il peut durer toute la nuit si

l’appareil a été chargé correctement pendant 11 à 12 heures. S’il est sur le

mode ON, la batterie s’épuisera et durera entre quelques minutes et quelques

heures, en fonction de la charge disponible. À la discrétion de l’utilisateur.

German

Beschreibung von Aussehen & Interface

1. Solarmodul

2. Betriebsmodustaste (Auto/ Ein)

3. Bewegungssensor(en)

4. LED-Lampen

5. Montage-Schraubloch (Schraublöcher)

6. Hauptbetriebsschalter (Ein/ Aus)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

German

Bedienungsanleitung

1. Installation

Installieren Sie den SolarWay-2 in einem offenen Bereich, wo ihn die

Sonnenstrahlen erreichen können, um so seine eingebaute, wiederaufladbare

Batterie optimal zu nutzen. Finden Sie einen geeigneten Montageplatz, der

geschützt ist vor kaltem und heißem Wind, vor Gewitter und extrem hohen

Temperaturen. Verwenden Sie zur Montage Schrauben, die Sie an der Wand

befestigen.

2. Bedienung

Finden Sie den Hauptbetriebsschalter an der Rückseite des SolarWay-2. Lassen

Sie diesen während des Transports und immer dann, wenn der SolarWay-2 nicht

benutzt wird, AUSGESCHALTET. Wenn Sie bereit sind, das Gerät zu nutzen,

schalten Sie den Schalter EIN.

Benutzen Sie die Betriebsmodustaste, um zwischen zwei Nutzungsoptionen zu

wählen: AUTO oder EIN. Wie lange der SolarWay-2 in Betrieb bleibt, hängt von

seinem Ladezustand ab. Bei der Einstellung AUTO kann er die ganze Nacht über

in Betrieb bleiben, wenn er für 11-12 Stunden korrekt aufgeladen ist. Bei der

Einstellung EIN läuft er so lange, wie der Akku hält. Das kann jede beliebige

Zeitspanne zwischen ein paar Minuten und ein paar Stunden sein, je nachdem

wie viel Ladung verfügbar ist. Diese Entscheidung liegt im Ermessen des

Benutzers.

Portuguese

Aparência e descrição da interface

1. Painel Solar

2. Botão de Modo de trabalho (Automático/Ligado)

3. Sensor(es) de movimento

4. Luzes LED

5. Orifício(s) do parafuso de montagem

6. Botão de alimentação principal (Ligado/Desligado)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

Portuguese

Instruções de funcionamento

1. Instalação

Instale o SolarWay-2 numa área aberta onde o sol possa brilhar sobre ele a fim

de maximizar o uso da sua bateria recarregável incorporada. Encontre um local

de montagem apropriado que esteja livre de ventos frios ou quentes,

relâmpagos e temperaturas extremamente elevadas. Use os parafusos que são

fixados na parede para a montagem.

2. Funcionamento

Localize o Botão de alimentação principal localizado na parte traseira do

SolarWay-2. Mantenha-o desligado (OFF) durante o transporte ou sempre que o

SolarWay-2 não estiver a ser utilizado. Logo que esteja pronto para começar a

utilizá-lo, ligue o interruptor para a posição ON (Ligado).

Use o Botão de Modo de trabalho para escolher entre duas opções de utilização:

AUTOMÁTICO ou LIGADO. A quantidade de tempo que o SolarWay-2 permanece

ligado irá depender da quantidade de carga que possui. Se for definido como

AUTOMÁTICO, pode durar toda a noite se for carregado corretamente durante

11-12 horas. Se for definido como LIGADO, irá gastar a bateria e poderá durar de

alguns minutos a algumas horas, dependendo da quantidade de carga disponível.

Aconselha-se que seja usado um critério sensato.

Romanian

Instrucțiuni de folosire

1.Instalare

Instalați SolarWay-2 intr-o zona unde soarele poate bate pe el pentru a putea

maximaliza utilizarea acumulatorului sau reîncărcabil incorporat. Sǎ găsiți un loc

potrivit pentru montare, care sǎ fie aparat fata de vanturile reci sau calde, de

fulgere şi de temperaturile extrem de ridicate. Pentru montare sǎ folosiți

șuruburile care se afla pe perete.

2.Operare

Sǎ căutați Întrerupătorul Principal amplasat pe spatele lui SolarWay-2. Sǎ-l

țineți pe poziție de OPRIT in timpul transportului sau când SolarWay-2 nu este

folosit. Odată ce sunteți pregătiți sǎ-l folosiți, sǎ puneți întrerupătorul pe poziția

APRINS.

Sǎ folosiți Tasta Modalității de Lucru pentru a alege intre doua opțiuni de

utilizare: AUTO sau PORNIT. Durata de timp in care SolarWay-2 sta pornit

depinde de câta încărcare duce. Daca este setat pe AUTO, poate tine toata

noaptea, daca este încărcat corect timp de 11-12 ore. Daca este setat pe ON, va

descărca acumulatorul şi va tine de la câteva minute la câteva ceasuri

depinzând de câta încărcare este disponibila. Se sugerează discreție din partea

utilizatorului.

Romanian

Russian

Описание внешнего вида и интерфейса

1. Солнечная батарея

2. Кнопка рабочего режима (авто/вкл.)

3. Датчик(и) движения

4. Светодиодные лампы

5. Отверстие для крепежного винта

6. Главная кнопка питания (вкл./выкл.)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

Russian

Инструкция по эксплуатации

1.Установка

Установите SolarWay-2 в открытом пространстве, где на него могут

попадать солнечные лучи, чтобы максимально использовать свойства

встроенной перезаряжаемой батареи. Найдите подходящее место для

монтажа, которое не подвержено воздействию холодного или сухого

ветра, молний или чрезмерно высоких температур. Для монтажа

используйте винты, закрепленные на стене.

2.Работа

Найдите главную кнопку питания, расположенную на задней части

SolarWay-2. Сохраняйте ее в выключенном положении во время

транспортировки SolarWay-2 или когда SolarWay-2 не используется.

Включите ее, когда будете готовы начать использовать SolarWay-2.

Используйте кнопку рабочего режима, чтобы выбирать между двумя

вариантами использования: АВТО или ВКЛ. То, сколько времени

SolarWay-2 остается включенным, зависит от количества заряда. При

выборе АВТО он может работать всю ночь, если SolarWay-2 заряжался

на протяжении 11-12 часов. При выборе ВКЛ. батарея будет

разряжаться, и SolarWay-2 может работать от нескольких минут до

нескольких часов в зависимости от количества доступного заряда.

Рекомендуется проявлять осмотрительность.

Turkish

Görünüm ve Arayüz Açıklaması

1. Güneş Paneli

2. Çalışma Modu Düğmesi (Otomatik / Açık)

3. Hareket Sensörü (ler)

4. LED Işıkları

5. Montaj Vidası Deliği (Delikleri)

6. Ana Güç Düğmesi (Açık / Kapalı)

SolarWay-2

Battery Capacity: 2000mAH

Battery Type: 18650 Li-ion

Solar Panel Input: 5V/130mA

LED Brightness: 160 lumens

S/N:

Made in China

www.promate.net

180196

Page is loading ...

Promate SolarWay-2 User manual

Brand: Promate

Model: SolarWay-2

Type: User manual

Download PDF

report

in other languages

Türkçe: Promate SolarWay-2 Kullanım kılavuzu
română: Promate SolarWay-2 Manual de utilizare

Promate SolarWay-2 User manual

Promate SolarWay-2 User manual

in other languages

Related papers

Other documents