RK5002 Instructions Page 1 P35754
www
.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: 310-898-1100; Fax: 310-898-1111
©
2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK5002 INSTRUCTIONS
RK5002 Product Inventory
Finger Cable Manager (1)
10-32 x 1 Screw (4)
1
0-32 Spring Nut (4)
Instructions
1. Install 10-32 spring nut by holding it horizontally in the slotted horizontal, pushing and turning it clockwise into
a vertical position.
2. Repeat step 1 so that you have four spring nuts in place.
3. Use 10-32 screws and install cable manager.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Belkin RK1002 User manual
-
-
-
-
-
-
-
-
-