3.1.3.2. Exporting a configuration file .................................................................................... 46
3.1.4. Changing the IP Address ............................................................................................ 47
3.1.5. Connecting to a remote DL-302 device ...................................................................... 48
3.1.6. Setting the Serial Port ................................................................................................ 49
3.1.7. Setting the Modbus ID ............................................................................................... 50
3.1.8. Adjusting the LED Brightness ..................................................................................... 51
3.1.9. Adjusting the Message Motion Speed ....................................................................... 52
3.1.10. Restoring the Default Settings ................................................................................... 53
3.1.11. Updating Date and Time ............................................................................................ 54
3.1.12. Resetting the Display .................................................................................................. 56
3.1.13. Checking the Firmware Information .......................................................................... 57
3.2. eSearch Utility............................................................................................................... 58
3.2.1. Configuring the IP Address ......................................................................................... 59
3.2.2. Sending the Modbus Command to iKAN ................................................................... 61
3.2.2.1. Using Modbus RTU Command to Configure the iKAN display .................................. 62
3.2.2.2. Using Modbus TCP Command to configure the iKAN display ................................... 64
4. Messages ............................................................................................................ 66
4.1. Editing and Managing Messages .................................................................................... 66
4.2. Displaying Messages with Variables ............................................................................... 69
4.2.1. Inserting System Variables into a Message ................................................................ 75
4.2.1.1. Displaying the IP Address .......................................................................................... 75
4.2.1.2. Displaying the Current Date and Time ...................................................................... 78
4.2.1.3. Displaying the CO2 and Temperature Values from a Remote DL-302 Module ......... 80
4.2.2. Inserting Integer-type Variables into a Message ....................................................... 82
4.2.3. Inserting float-type Variables into a Message............................................................ 85
4.2.4. Inserting Coil –type Variables into a Message ........................................................... 88