Maspro 2spfa User manual

Brand
Maspro
Model
2spfa
Type
User manual
1
Frequency Range:10 2655MHz
SPLITTERS
Read this instruction manual carefully before use.
Instruction Manual
Superb Eliminator of Electoromagnetic Interference
MASPRO's original back-cover press fit processing and
zinc die-casting housing, integrated with receptacles,
provide complete shielded housing and excellent
shielding effect against any radio wave interference.
INDOOR
USE
SPLITTERS
&
DIRECTIONAL
COUPLERS
2SPFA
2-way
3SPFA
3-way
4SPFA
4-way
5SPFA
5-way
6SPFA
6-way
8SPFA
8-way
DIRECTIONAL
COUPLERS
1DC10FA
1-way
2DC10FA
2-way
4DC10FA
4-way
2-way
Directional Coupler
2DC10FA
Band width is 10~2655MHz which covers all of the
IF Band of Satellite.
Specifications
Min. Isolation Out-to-Out
(
dB
)
Symbol
Max. Splitting Loss
(
dB
)
Max. VSWR
Max. Insertion Loss
(
dB
)
Type
2-way
3-way
4-way
5-way
8-way
Model
I
mpedance
( )
2SPFA
3SPFA
4SPFA
5SPFA
8SPFA
75
F-type
connector
F-type
connector
6SPFA
6-way
Model
Model
Type
Symbol
I
mpedance
( )
In-Out One Port Power Passing
Maximum Power Passing Capacity: 1A at 15V DC or 30V AC
In-Out Port Power Passing
Maximum Power Passing Capacity: 1A at 15V DC or 30V AC
1-way
2-way
4-way
1DC10FA
2DC10FA
4DC10FA
1DC10FA
2DC10FA
4DC10FA
Max. Tap Value
(
dB
)
Min. Isolation Tap-to-Tap
(
dB
)
Min. Isolation Tap-to-Out
(
dB
) Max. VSWR
75
Model
2SPFA 3SPFA 1DC10FA 2DC10FA
4SPFA 5SPFA 4DC10FA
6SPFA 8SPFA
Dimensions
4SPFA 6SPFA 8SPFA OUT VSWR : 2.5
You can always rely on MASPRO's performance data.
Specifications
and
external design
are
subject
to
change
due
to
upgrades
in
product
quality
.
Accessory
F-type connectors
(
For 5C Cable
)
: Includes connectors to cover all ports
Japanese Patent No.2802659
Japanese Design Patent
No. 865907
Japanese Design Patent
No. 996171
4-way Splitter
4SPFA
This is the MASPRO RoHS logo attached to equipment that is compliant with the standards of
the EU (European Union) Environmental Directive, RoHS ("Restriction of the use of certain
Hazardous Substances in Electronic Equipment").
The JEITA Digital Hi-Vision mark (DH mark) is conferred by the Japan Electronics and
Information Technology Industries Association to indicate the superior performance of
antennas and equipment for both satellite and terrestrial digital TV broadcasting.
Zinc Die-casting
Housing
MASter of PROduction
In-Out One Port Power Passing
In-Out Port Power Passing
SPLITTERS
DIRECTIONAL COUPLERS
Superb Elimination of Electoromagnetic Interference
Wide
Band
2
MASter of PROduction
2K56-070 (B) -
5070
-1L
( )
( )
( )
Power
Passing How
to
Install
Power passing possible between port with power passing (red
arrow) mark.
Maximum Power Passing Capacity: 1A at 15DC or 30V AC
OUT
OUT
Power
passing
port
OUT OUT
4-way Splitter
4SPFA
BR
2-way Directional Coupler
2DC10FA
BR
Wood Screws (2 pcs.)
2N m(21kgf cm)
F-type
Connector Installation
Cut off the tip of the
center conductor at
an angle to prevent
incomplete contact.
The center conductor is covered
with white film. Be sure to remove
it for better conductivity.
1.Pass the ferrule through the cable.
2.Fold back the copper braids.
3.Push the plug in firmly.
Fold back the
copper braids.
Aluminum foil
Ferrule
plug
plug
Completed
Ferrule
Cable
Ferrule
A
bent
center
conductor
may
cause
short
circuit
and
malfunction.
Complete Drawing
Straighten
the
center
conductor.
IN
Power
passing
port
( )
IN
Power
passing
port
NOTE
Wooden Wall
(Thickness of 10mm or more)
After connecting with cable, install splitter on wooden wall
with the two wood screws attached to the splitter itself.
This splitter is indoor use only.
Please refrain from using this
splitter outdoors.
When aluminum foil comes off
F-type connector, provided as accessory, is for 5C cables.
Push and turn the plug in the cable
gently so that the plug turns the
aluminum foil in the same direction
it is coiled, and be sure to keep the
aluminum foil inside the plug.
In addition, be sure to remove
any shreds of aluminum foil.
Press firmly at the foot of the plug
so that it does not come out.
Center conductor Center conductor
OUT
Power
passing
port
Example
VHF
2-way Splitter
2SPFA
Satellite
15V DC
DFMTD
DFM10
DFM8R
Satellite
VHF
UHF
Wall Outlet
Wall Outlet
Wall Outlet
(Power Insertion Type)
15V DC
Satellite
VideoAudio
VHF UHF
15V DC
TV
Satellite Receiver
VHF UHF Satellite Mixer
VHF UHF
Mixer
ASADA, NISSIN, AICHI, 470-0194 JAPAN
Be sure to connect cable from
Power Insertion Type port with
power passing terminal.
F-type connector
Tightening torque
For satellite reception, use units and
cables which meet the performance
requirements for the satellite frequency
range.
Make sure the length of the
center conductor is 2mm.
Excessively long center conductor
may damage connector and will
cause malfunction.
UHF
VHF UHF Satellite Separator
SR2TL2-P
Actual size
1 Cable processing 2 Mounting the plug 3 Pressure bonding of ferrule
AUG., 2007
Power Passing Capacity
1A at 15V DC or 30V AC
  • Page 1 1
  • Page 2 2

Maspro 2spfa User manual

Brand
Maspro
Model
2spfa
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents