Aztech WL830PC Easy Start

Brand: Aztech

Model: WL830PC

Type: Easy Start

WL830PC Easy Start

Introduction

Thank you on your purchase of WL830PC Wireless Card.

WL830PC Wireless Card provides user the flexibility to connect to the Internet in a

wireless environment.

Operating System Requirement

MS-Windows 98 SE (Second Edition)

MS-Windows 2000

MS-Windows Me (Millennium Edition)

MS-Windows XP Home/Professional Edition

Installing the Driver

For configuring your wirless card, double-click the Client Utility icon and select

under Help > Atheros Client Utility Help.

Follow on screen instructions to configure your wireless card.

P/N: 040-511553-101

Uninstalling the Drivers

iii On your Desktop , Click on the "My Computer" icon.

ii Click "Control Panel".

iii Double click "Add/Remove Programs".

iv Double click "Atheros Wireless Network Adapter and Applications"

v Under the "Atheros Install Program For Wireless Network Adapter Products",

please select "Delete the previous installation".

vi Follow on-screen instruction to uninstall the driver.

ATTENTION: Please DO NOT insert your

wireless PC card to your computer UNTIL

you have installed the software FIRST.

LED Specification

Power LED Network LED Meaning

Slow-rate Blink OFF

Pow er S av e Mo de ( def ault

from power up or reset)

OFF Awake

Alternate Blink

Search for net work

association

Slow-rate Blink

Associated with network - No

activity

Fas t -r ate Bl i nk

Associated with network -

blink increases with activity

OFF

OFF No power

For Windows 98 SE Users

Please click cancel at the Start up page (if prompted) after you have

inserted the Installation CD. Please run the file Wmi9x.exe located in the

root directory of the Installation CD before installing the driver. (Eg. D:\

Wmi9x.exe)

iii Insert Installation CD into the CD-ROM drive. If the Installation CD does not start

automatically, please run the Setup.exe program located on the CD-ROM.

ii Click "Next".

iii Select "I accept the terms of the license agreement" and click "Next".

iv Click "Next" to continue with the rest of the installation steps.

For Windows XP Users, you would encounter a screen that says “Software Installation”.

This is normal, just click "Continue Anyway".

v. Click "Finish" to end the Installation wizard.

Insert WL830PC Wireless Card into the PCMCIA slot firmly and evenly. Take care not

to force it into the slot. WL830PC Wireless Card will automatically run its own

installation setup.

For Windows 98 SE Users, skip the file when prompted for .CAT file. Restart the PC

after the driver installation has completed.

The Installation will activate the Client Utility icon in the "system tray" of the Windows

taskbar. You can find the icon at the right-bottom of your screen.

For Windows 98 SE / ME Users

Please locate the file ar52119x.sys found in root directory of the Installation

CD if prompted for missing ar52119x.sys file. (Eg. D:\ ar52119x.sys)

Declaration of Conformity

Marking by the above symbol indicates compliance with the Essential

Requirements of the R&TTE Directive of the European Union (1999/5/EC).

This equipment meets the following conformance standards:

EN300 328, EN301 489-17, EN60950

Countries of Operation and Conditions of Use in the European

Community

This device is intended to be operated in all countries of the European

Community. Requirements for indoor vs. outdoor operation, license

requirements and allowed channels of operation apply in some countries as

described in this document.

Note: The user must use the configuration utility provided with this

product to check the current channel of operation and confirm that the

devices operating in conformance with the spectrum usage rules for

Euroean Community countries as described below.

If operation is occurring outside of the allowable channels as indicated in this

guide, then the user must cease operating the product and consult with the local

technical support staff responsible for the wireless network.

This device may be operated indoors or outdoors in all countries of

the European Community using the 2.4GHz band: Channels 1 – 13,

except where noted below:

• In Italy the end-user must apply for a license from the national spectrum

authority to operate this device outdoors.

• In France outdoor operation is only permitted using the 2.4 – 2.454 GHz

band: Channels 1 – 7.

Radio Frequency Interference Warnings &

Instructions

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following methods:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an electrical outlet on a circuit different from that

which the radio receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Modifications made to the product, unless expressly approved by Atheros

Communication, could void the user’s right to operate the equipment.

RF Exposure

This device has been tested and complies with FCC RF Exposure (SAR)

limits in typical laptop computer configurations and this device can be used

in desktop or laptop computers with side mounted PCMCIA slots which can

provide 1 cm separation distance from the antenna to the body of the user or

a nearby person. Thin laptop computers may need special attention to main-

tain antenna spacing while operating. This device cannot be used with

handheld PDAs (personal digital assistants). Use in other configurations may

not ensure compliance with FCC RF exposure guidelines. This device and

its antenna must not be co-located or operated in conjection with another

antenna or transmitter.

WL830PC Easy Start

(FCC ID: I38-WL830PC-001)

Aztech WL830PC Easy Start

Aztech WL830PC Easy Start

Related papers

Other documents