Optoma HD86 User manual

HD86
Optoma
Brand
Optoma
Model
HD86
Category
Data projectors
Type
User manual

This manual is also suitable for

English
1
Table of contents
Table of Contents ...................................................................................1
Usage Notice
..........................................................................................3
Safety Information .........................................................................................3
Precautions....................................................................................................4
Eye Safety Warnings
.....................................................................................6
Introduction.............................................................................................7
Package Overview.........................................................................................7
Product Overview
..........................................................................................8
Main Unit ................................................................................................................8
Connection Ports
...................................................................................................9
Remote Control
....................................................................................................10
Backup Remote Control
....................................................................................... 11
Coin Cell Battery Replacement
............................................................................ 11
Installation ............................................................................................12
Connecting the Projector .............................................................................12
Connect to Notebook/DVI/VGA-In .......................................................................12
Connecting the Projector .............................................................................13
Connect to Video Sources ...................................................................................13
Installing or Removing the Optional Lens ....................................................14
Removing the Existing Lens From the Projector ..................................................14
Installing the New Lens
........................................................................................15
Powering On/Off the Projector.....................................................................16
Powering On the Projector ...................................................................................16
Powering
Off the Projector ...................................................................................17
Warning Indicator
.................................................................................................17
Adjusting the Projected Image.....................................................................18
Adjusting the Projector’s Height ...........................................................................18
Adjusting Projected Image Position Using PureShift
...........................................19
Adjusting Projection Image Size
..........................................................................21
User Controls .......................................................................................23
Remote Control ...........................................................................................23
On-screen Display Menus
...........................................................................25
How to operate ....................................................................................................25
Menu Tree ...................................................................................................26
Image ...................................................................................................................27
Image | Advanced
................................................................................................29
Image | Advanced | PureEngine
..........................................................................31
Display
.................................................................................................................32
System
.................................................................................................................35
System | Lamp Settings
.......................................................................................38
System | Startup Image
.......................................................................................39
Setup
....................................................................................................................40
2
Table of contents
Appendicess .........................................................................................43
Troubleshooting ...........................................................................................43
Image Problems ...................................................................................................43
Other Problems
....................................................................................................44
Projector Status Indication
...................................................................................45
Remote Control Problems
....................................................................................47
Replacing the Lamp.....................................................................................48
Compatibility Modes
....................................................................................51
RS232 Commands and Protocol Function List............................................52
RS232 Pin Assignments ......................................................................................52
RS232 Protocol Function List
..............................................................................53
Ceiling Mount Installation ............................................................................56
Optoma Global Ofces
................................................................................57
Regulation & Safety Notices
........................................................................59
English
3
Usage Notice
Safety Information
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk of
re and/or electric shock, do not expose the projector to rain or
moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as ampliers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
▀■ Unit has been dropped.
▀
■ Power supply cord or plug has been damaged.
▀
■ Liquid has been spilled on to the projector.
▀■ Projector has been exposed to rain or moisture.
▀
■ Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in re or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
4
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
When the lamp reaches
the end of its life, the
projector will not turn
back on until the lamp
module has been
replaced. To replace
the lamp, follow the
procedures listed under
“Replacing the Lamp”
section on page 45.
▀■ Warning-
Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your
eyes.
▀■ Warning-
To reduce the risk of re or electric shock, do
not expose this projector to rain or moisture.
▀■ Warning-
Please do not open or disassemble the
projector as this may cause electric shock.
▀■ Warning-
When replacing the lamp, please allow the
unit to cool down. Follow instructions as
described on page 48.
▀■ Warning-
This projector will detect the life of the lamp
itself. Please be sure to change the lamp
when it shows warning messages.
▀■ Warning-
Reset the “Lamp Reset” function from the
on-screen display “System|Lamp Setting”
menu after replacing the lamp module
(refer to page 38).
▀■ Warning-
When switching the projector off, please
ensure the cooling cycle has been completed
before disconnecting power. Allow 90 seconds
for the projector to cool down.
▀■ Warning-
Do not use lens cap when projector is in
operation.
▀■ Warning-
When the lamp is approaching to the end of its
life time, the message “Replacement
suggested” will show on the screen.
Please contact your local reseller or service
center to change the lamp as soon as
possible.
Note
Note
English
5
Usage Notice
Do:
▀■ Turn off and unplug the power plug from the AC outlet before
cleaning the product.
▀■
Use a soft dry cloth with mild detergent to clean the display
housing.
▀■
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
▀■ Block the slots and openings on the unit provided for
ventilation.
▀■ Use abrasive cleaners, waxes or solvents to clean the unit.
▀■ Use under the following conditions:
- In extremely hot, cold or humid environments.
Ensure that the ambient room temperature is
within 5 - 35°C
Relative Humidity is 5 - 35°C, 80% (Max.), non-condensing
- In areas susceptible to excessive dust and dirt.
-
Near any appliance generating a strong magnetic eld.
-
In direct sunlight.
6
Usage Notice
Eye Safety Warnings
▀■ Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■ In order to minimize the lamp power, use room blinds to
reduce ambient light levels.
English
7
Introduction
Option lens
(Standard lens, Long throw lens,
Short throw lens)
Package Overview
Unpack and inspect the box contents to ensure all
parts listed below are in the box. If something is
missing, please contact Optoma customer service.
Documentation :

User’s Manual

Warranty Card

Quick Start Card

WEEE Card
Due to different
applications in each
Country, some regions
may have different
accessories.
2 x AA Batteries
Projector with lens cap
Note
Note
Remote Control Backup Remote Control
CR2025
3V
Backup Remote Battery 12V Trigger Connector
(EMEA/USA*2, ASIA*1)
RS232 Cable 2.0m HDMI Cable 1.8m
(Europe Only)
Composite Video Cable
1.8m
(Not Available in European Version)
Power Cord 1.8m
8
Introduction
Product Overview
1. Lens Shift Adjustment Cover
2. IR Receiver
3. Tilt-Adjustment Feet
4. Lamp Replacement Cover
5. Zoom
6. Focus
7. Vertical and Horizontal Lens Shift Adjustment Control and
Lens Release
8. Backup Remote Tray
9. LED Indicators
10. Power Button
11. Connection Ports
Main Unit
1
8
3
2
4
6
5
10
11
9
7
English
9
Introduction
Connection Ports
1. Composite Video
2. Component Video
3. HDMI 1
4. HDMI 2
5. HDMI 3
6. Service connector (USB B-TYPE )
7. Backup Remote Tray
8. IR Receiver
9. Power Button
10. LED Indicators
11. 12V OUT B
12. 12V OUT A
13. RS232
14. Power Socket
15. Main Power Switch
16. S-Video
17. VGA Input
18. Kensington Microsaver
TM
Lock Port
79 8
3 4 5 621
10111218 13141617 15
10
Introduction
Remote Control
1. Power On
2. Power Off
3. PureEngine
4. Brite Mode
5. Advanced
6. Four Directional Select
Keys
7. Mode
8. Edge Mask
9. 12V OUT A On/Off
10. Re-Sync
11. VGA
12. HDMI 3
13. Video
14. HDMI 2
15. S-Video
16. Native
17. YPbPr
18. HDMI 1
19. 16:9
20. 4:3
21. Letter-Box
22. Overscan
23. Menu
24. Enter
25. Color
26. DynamicBlack
27. Contrast
28. Brightness
1
27
2
3
4
5
6
20
19
18
17
9
10
12
13
26
11
15 1416
28
21
7
8
23
22
24
25
English
11
Introduction
Backup Remote Control
1. Power Off
2. Power On
3. Enter
4. Four Directional Select
Keys
5. Source
6. Menu
1
3
5
6
2
4
Before using the
remote control for the
rst time, remove the
transparent insulation
tape.
Note
Note
3
V
O
L
T
S
CR2025
Coin Cell Battery Replacement
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
1 2
3 4
Note
Note
Backup remote
control is
magnetically attached
to the back I/O of the
projector.
12
Installation
Due to the difference
in applications for each
country, some regions
may have different
accessories.
1.................................................................... VGA Input Cable (Europe Only)
2..........................................................DVI/HDMI Cable (Optional Accessory)
3....................................................................................................Power Cord
4...............................................................RS232 Cable (Optional Accessory)
Note
Note
E62405SP
R
VGA,DVI
VGA,DVI
Connecting the Projector
4
1 2
3
Connect to Notebook/DVI/VGA-In
English
13
Installation
Due to the difference
in applications for each
country, some regions
may have different
accessories.
1.......................Composite Video Cable (Not Available in European Version)
2...............................RCA Component Cable for YPbPr (Optional Accessory)
3............................................................................HDMI Cable (Europe Only)
4....................................................................................................Power Cord
5.............................................................S-Video Cable (Optional Accessory)
6...............................................SCART RGB/S-Video Adapter (Europe Only)
Note
Note
DVD player, Set-top Box
HDTV receiver
Video Output
S-Video Output
DVD player, Set-top Box
HDTV receiver
DVD player, Set-top Box
HDTV receiver
E62405SP
R
Connecting the Projector
4
5
1
2 3
Connect to Video Sources
12V OUT is a
programmable trigger.
Note
Note
6
14
Installation
Caution
• Do not shake or place excessive pressure on the
projector or the lens components as the projector and
lens components contain precision parts.
• Before removing or installing the lens, be sure to turn off
the projector, wait until the cooling fans stop, and turn
off the main power switch.
• Do not touch the lens surface when removing or
installing the lens.
• Keep ngerprints, dust or oil off the lens surface.
Do not scratch the lens surface.
• Work on a level surface with a soft cloth under it to avoid
scratching.
• If you remove and store the lens, attach the lens cap to
the projector to keep off dust and dirt.
Installing or Removing the Optional Lens
1. Push down and
release the top cover
to open.
2. Push the LENSE
RELEASE button to
the unlock
position.
3. Grasp the lens.
4. Rotate the lens
counterclockwise.
The existing lens will
be disengaged.
Removing the Existing Lens From the Projector
English
15
Installation
3. Pull out the existing
lens slowly.
Installing the New Lens
1. Align the notches and
correctly position
the electrical contact
pad as shown in the
picture.
2. Rotate the lens
clockwise until you
feel it click into place.
Pin of
IRIS
Pin of IRIS should be in
the direction as shown
in the picture.
Note
Note
16
Installation
Powering On the Projector
1. Remove the lens cap.
2. Securely connect the power cord and signal cable. When
connected, the power led will turn red.
3. Turn on the lamp by pressing “
” button on the rear of
the projector or “
” on the remote control.
The power led “ ” will now ash blue.
The startup screen will display in approximately 30 seconds.
The rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source that you want to display on the screen
(computer, notebook, video player, etc). The projector will
detect the source automatically and will display on the
screen. If not, push menu button and go to “SETUP”. Make
sure that the “Source Lock” has been set to “Off”.
▀■If you connected multiple sources at the same time, press
the “Source” key on the remote control to switch between
inputs.
Powering On/Off the Projector
Turn on the projector
rst and then select the
signal sources.
First time to turn on the
projector:
Remember to select the
type of lens you have
installed. Detail see
page 37
1
Note
Note
2
English
17
Installation
Warning Indicator
▀■ When the “LAMP” indicator led “ ” is lit orange, the
projector will automatically shut down. Please call the
nearest Optoma facility for assistance.
▀■ When the “TEMP” indicator “ ” turns red, it indicates the
projector has overheated. The projector will shut down
automatically.
Under normal conditions, the projector can be switched on
again after it has cooled down.
▀■ When the “TEMP” indicator “ ” ashes red, it indicates the
fan has failed.
Powering Off the Projector
1. Press the “ ” button on the remote control or “ ” button
on the rear side of the projector two times with one second
interval in between to turn off the projector. First push of
button will display the following message on the screen.
Press the button again to conrm the shut down. If the
button is not pressed, the message will disappear in 5
seconds.
2. The cooling fans continue to operate for about 60 seconds
for cooling cycle and the Power LED “ ” will turn blue.
When the light is solid red, the projector has entered standby
mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
“ ” button on the rear of the projector or “ ” on the
remote control to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
Contact the nearest
service center if the
projector displays these
symptoms. See page
57 for more information.
Note
Note
18
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
Tilt-Adjustment Feet
The projector is equipped with elevator feet for adjusting
the image height.
To raise the image:
Use screw in foot to raise the image to the desired height
angle and ne-tune the display angle .
To lower the image:
Use screw in foot to lower the image to the desired height
angle and ne-tune the display angle .
1
English
19
Installation
Horizontal Lens
Shift Lever
Adjusting Projected Image Position
Using PureShift
The PureShift feature provides a lens shift function that can be
used to adjust the position of the projected image either
horizontally or vertically within the range detailed below.
PureShift is a unique system that provides lens shift while
maintaining a much higher ANSI contrast ratio than traditional
lens shift systems.
Vertical Lens
Shift Lever
▀■ Adjusting the vertical image position
The vertical image height can be adjusted between 110% and
30% of half image height. Note that the maximum vertical
image height adjustment can be limited by the horizontal image
position. For example it is not possible to achieve the maximum
vertical image position height detailed above if the horizontal
image position is at maximum. Please consult the PureShift
Range diagram below for further clarication.
Lens Release
20
Installation
▀■ Adjusting the horizontal image position
With the lens in the center position the horizontal image
position can be adjusted to the left or right by up to a maximum
of 10% of the half image width. Note that the maximum
horizontal image height adjustment can be limited by the
vertical image position. For example it is not possible to achieve
the maximum horizontal image position if the vertical image
position is at maximum. Please consult the PureShift Range
diagram below for further clarication.
Left Side
(W/2) x 10% (W/2) x 10%
Right Side
Screen Width
(W)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Optoma HD86 User manual

HD86
Optoma
Brand
Optoma
Model
HD86
Category
Data projectors
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents