LG CM8430 Owner's manual

Brand: LG

Model: CM8430

Category: Home audio sets

Type: Owner's manual

OWNER’S MANUAL

Mini Hi-Fi System

Please read this manual carefully before operating your set and retain it

for future reference.

ENGLISH

CM8530 (CM8530, CMS8530F/S/W)

CM8430 (CM8430, CMS8530F/W)

CM8330 (CM8330, CMS8530F)

www.lg.com

CM8430-AB_DUSALLK_ENG.indd 1 2013-01-24 �� 8:09:12

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure

that may be of sucient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: This product contains chemicals known

to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands

after handling.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing the

product on a bed, sofa, rug or other similar surface.

This product should not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not

try to open the enclosure.

CM8430-AB_DUSALLK_ENG.indd 2 2013-01-24 �� 8:09:13

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CM8430-AB_DUSALLK_ENG.indd 3 2013-01-24 �� 8:09:13

Getting Started4

Getting Started

IMPORTANT SAFETY

INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

CM8430-AB_DUSALLK_ENG.indd 4 2013-01-24 �� 8:09:14

Getting Started 5

Getting Started

FCC Compliance Statement

This device complies with part 15 of the FCC

rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses, and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment o and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit dierent from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

CAUTION : Any changes or modications not

expressly approved by the party responsible for

compliance could void the user’s authority to

operate this equipment.

FCC WARNING : This equipment may generate

or use radio frequency energy. changes or

modications to this equipment may cause harmful

interference unless the modications are expressly

approved in the instruction manual. The user could

lose the authority to operate this equipment if an

unauthorized change or modication is made.

FCC RF Radiation Exposure Statement : This

equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

This equipment should be installed and operated

with minimum distance 20 cm between the

radiator and your body. End users must follow the

specic operating instructions for satisfying RF

exposure compliance. This transmitter must not be

co-located or operating in conjunction with any

other antenna or transmitter.

FCC Radio Frequency Interference

Requirements

This device is restricted to indoor use due to its

operation in the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for

the frequency range 5.15 to 5.25 GHz to reduce the

potential for harmful interference to co-channel

Mobile Satellite systems. High power radars are

allocated as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar stations

can cause interference with and/or damage this

device. This device cannot be co-located with any

other transmitter.

CAUTION: Regulations of the FCC and FAA prohibit

airborne operation of radio-frequency wireless

devices because their signals could interfere with

critical aircraft instruments.

Responsible Party :

LG Electronics USA, Inc. 1000 Sylvan Avenue

Englewood Clis, NJ 07632

TEL. : +1-800-243-0000

CM8430-AB_DUSALLK_ENG.indd 5 2013-01-24 �� 8:09:14

Table of Contents6

Table of Contents

1 Getting Started

2 Safety Information

8 Unique Features

8 Accessories

9 Playable file Requirement

9 – MP3/WMA music file requirement

9 – Compatible USB Devices

9 – USB device requirement

10 Front panel

12 Rear panel (CM8530)

13 Rear panel (CM8430)

14 Rear panel (CM8330)

15 Remote control

2 Connecting

16 How to Affix the Ferrite Core(For EMI

only)

16 – Affix the Ferrite Core for power cord

(For EMI only, CM8530, CM8430)

16 – Affix the Ferrite Core for lighting

cable (For EMI only, CM8530,

CM8430)

17 Connecting to speakers

17 – Before connecting (CM8530 only)

18 – Connecting to speakers

19 – Attaching the speaker light cables to

the unit (For CM8530, CM8430)

20 Optional Equipment Connection

20 – AUX IN Connection

20 – PORT. IN Connection

20 – Listening to music from your portable

player or external device

21 – USB Connection

21 – Antenna Connection

CM8430-AB_DUSALLK_ENG.indd 6 2013-01-24 �� 8:09:14

Table of Contents 7

3 Operating

22 Basic Operations

22 – CD/USB Operations

22 – Selecting a folder and

an MP3/WMA file

23 – Deleting an MP3/WMA file

24 Playback effect

24 – SMART DJ playback

25 – DJ effect

25 – AUTO DJ playback

26 – JUKE BOX Playback

(Program play)

27 Using a Bluetooth wireless technology

27 – Listening to music stored on the

Bluetooth devices

28 – Using Bluetooth App

30 Radio Operations

30 – Listening to the radio

30 – Improving poor FM reception

30 – Presetting the Radio Stations

30 – Deleting all the saved stations

31 Other Operations

31 – Turn off the sound temporarily

31 – Displaying file information

(ID3 TAG)

31 – DEMO

31 – Using Microphone

31 – Switching on and off the speaker

light(For CM8530, CM8430)

32 Sound adjustment

32 – Setting the surround mode

32 – Setting the USER EQ

33 Setting the Clock

33 – Setting the Clock Manually

33 – Setting the Clock through “LG

Bluetooth Remote” App

33 – Using your player as an alarm clock

34 – Sleep Timer Setting

34 – Dimmer

34 Advanced Operations

34 – Recording to USB

4 Troubleshooting

37 Troubleshooting

5 Appendix

38 General specifications

39 Speakers specifications

40 Trademarks and Licenses

41 Maintenance

41 – Notes on Discs

41 – Handling the Unit

CM8430-AB_DUSALLK_ENG.indd 7 2013-01-24 �� 8:09:14

Getting Started8

Getting Started

Unique Features

Bluetooth®

Listens to music stored on your bluetooth device.

Portable In

Listens to music from your portable device. (MP3,

Notebook, etc)

Playback effects

Listens to music with various sound and playback

eects.

USB Direct Recording

Records music to your USB device.

LG Bluetooth Remote

LG Bluetooth Remote is an App designed to let you

take control of some of LG’s latest Audio devices.

Refer to the page 28.

Accessories

Please check and identify the supplied accessories.

FM Antenna (1) AM Antenna (1)

Remote Control (1) Batteries (2)

Non-skid pad(1)-

CM8530 only

CM8430-AB_DUSALLK_ENG.indd 8 2013-01-24 �� 8:09:15

Getting Started 9

Getting Started

Playable file

Requirement

MP3/WMA music file

requirement

MP3/WMA le compatibility with this unit is limited

as follows.

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

Maximum les : Under 999

Maximum folders : Under 99

File extensions : “.mp3”/ “.wma”

CD-ROM le format : ISO 9660/ JOLIET

We recommend that you use Easy-CD Creator,

which creates an ISO 9660 le system.

You have to set the disc format option to

[Mastered] in order to make the discs compatible

with the LG players when formatting rewritable

discs. When setting the option to Live File

System, you cannot use it on LG players.

(Mastered/Live File System : Disc format system

for Windows Vista)

Compatible USB Devices

MP3 Player : Flash type MP3 player.

USB Flash Drive :

Devices that support USB2.0 or USB1.1.

The USB function of this unit does not support

all USB devices.

USB device requirement

Devices which require additional program

installation when you have connected it to a

computer, are not supported.

Do not extract the USB device while in operation.

For a large capacity USB, it may take longer than

a few minute to be searched.

To prevent data loss, back up all data.

If you use a USB extension cable or USB hub, the

USB device is not recognized.

Using NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

This unit is not supported when the total

number of les is 1,000 or more.

External HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

Some USB may not work with this unit.

CM8430-AB_DUSALLK_ENG.indd 9 2013-01-24 �� 8:09:15

Getting Started10

Getting Started

Front panel

CM8430-AB_DUSALLK_ENG.indd 10 2013-01-24 �� 8:09:15

Getting Started 11

Getting Started

Display window

Remote sensor

(Power)

USB 1/2 Port

You can play or record sound files by

connecting the USB device.

USB REC

Records to USB.

FUNCTION

Selects the function and input source.

Turn FUNCTION knob clockwise or

counterclockwise.

LATIN EQ

Chooses locally special equalizer.

SMART DJ

Selects SMART DJ mode. (For more information

refer to the page 24

AUTO DJ

Selects the AUTO DJ mode. (For more

informaion refer to the page 25

USER EQ

Sets sound equalizer on your own.

EFFECT LEVEL

Selects DJ effect level between low, middle, and

high.

DJ EFFECT

Press DJ EFFECT

-select DJ effect mode.

-Enters USER EQ setting mode and saves your

equalizer setting

Turn DJ EFFECT

- makes a sound on DJ effect mode.

- Selects BASS, MIDDLE, and TREBLE when

setting USER EQ.

Volume knob

Adjusts speaker volume.

ENTER

Selects a folder when searching a le.

FOLDER

Moves to folder and le selection mode.

DELETE

Deletes MP3/WMA files. (USB only)

Deletes a song on JUKE BOX list.

FILE SEARCH

Selects a folder and a file on CD/USB function.

BASS BLAST

Selects the BASS BLAST or BYPASS sound

directly.

(Open/Close)

- Stops playback or recording.

- Cancels DELETE function.

SPK Lighting / DEMO (CM8530 / CM8430)

- Changes speaker’s lighting effect.

- Shows demo

DEMO (CM8330)

- Shows demo

JUKE BOX

- Makes your favourites list.

- Switches on and off JUKE BOX.

Press this knob to

(Play/Pause).

- Starts or pauses playback.

- Selects Stereo/Mono.

Turn this knob clockwise or counterclockwise to

Y/U

(Skip/Search).

- Skips Fast backward or Forward.

- Searches for a section within a track/le.

- Adjusts the sound level when setting USER EQ.

Disc tray

PORT. IN jack

MIC jack

MIC VOL.

CM8430-AB_DUSALLK_ENG.indd 11 2013-01-24 �� 8:09:16

Getting Started12

Getting Started

Rear panel (CM8530)

Cooling fan

Speakers connector

SPEAKER LIGHTING SYSTEM

AUX IN connectors (L/R)

ANTENNA (FM, AM)

Power cord

Connect the power cord to wall outlet

directly if possible. Or when you use an

extension cable, it is highly recommended

to use an extension cable of 110 V / 15 A

or 230 V / 15 A, otherwise the unit may not

operate properly because of the lack of

power supply.

Do not overload the extension cord with

excessive electrical load.

Caution

CM8430-AB_DUSALLK_ENG.indd 12 2013-01-24 �� 8:09:16

Getting Started 13

Getting Started

Rear panel (CM8430)

Cooling fan

Speakers connector

SPEAKER LIGHTING SYSTEM

AUX IN connectors (L/R)

ANTENNA (FM, AM)

Power cord

Connect the power cord to wall outlet

directly if possible. Or when you use an

extension cable, it is highly recommended

to use an extension cable of 110 V / 15 A

or 230 V / 15 A, otherwise the unit may not

operate properly because of the lack of

power supply.

Do not overload the extension cord with

excessive electrical load.

Caution

CM8430-AB_DUSALLK_ENG.indd 13 2013-01-24 �� 8:09:17

Getting Started14

Getting Started

Rear panel (CM8330)

Cooling fan

Speakers connector

AUX IN connectors (L/R)

ANTENNA (FM, AM)

Power cord

Connect the power cord to wall outlet

directly if possible. Or when you use an

extension cable, it is highly recommended

to use an extension cable of 110 V / 15 A

or 230 V / 15 A, otherwise the unit may not

operate properly because of the lack of

power supply.

Do not overload the extension cord with

excessive electrical load.

Caution

CM8430-AB_DUSALLK_ENG.indd 14 2013-01-24 �� 8:09:17

Getting Started 15

Getting Started

Remote

control

Battery Installation

Remove the battery cover on

the rear of the Remote Control,

and insert two (size R03(AAA))

batteries with

and

matched

correctly.

• • • • • •

(Power) : Switches the unit ON

or OFF.

(Open/Close) : Opens and

closes the disc tray.

PRESETFOLDER

Searches for a folder of MP3/

WMA les. When a CD/USB

containing MP3/WMA les in

several folders is being played,

press PRESETFOLDER

to select the folder you want

to play.

Chooses a preset number for a

radio station.

FUNCTION : Selects the function

and input source.

MUTE

: Mutes the sound.

VOL +/- : Adjusts speaker volume.

TUNER MEMORY :

Stores radio stations.

Deletes all the saved stations.

USB REC : USB direct recording.

SLEEP : Sets the system to turn

off automatically at a specified

time.

(Dimmer : The display window

will be darkened by half.)

• • • • • •

REPEAT (MENU): Listens to

your tracks/les repeatedly or

randomly.

TUNING-/+ : Selects the radio

stations.

(Skip/Search) :

Skips Fast backward or

Forward.

Searches for a section within a

track/le.

ENTER :

Stops playback or recording.

Cancels DELETE function.

(Play/Pause) :

Starts or pauses playback.

Selects STEREO/MONO.

SOUND EFFECT : Chooses sound

impressions.

AUTO DJ : Selects the AUTO DJ

mode. (For more information refer

to the page 25

DELETE :

Deletes MP3/WMA les.

Deletes a song on JUKE BOX

list.

• • • • • •

0 to 9 numerical buttons : Selects

numbered tracks, les, or preset

number.

INFO : Sees informations about

your music. An MP3 le often

come with ID3 tag. The tag gives

the Title, Artist, Album or Time

information.

REGION EQ : Chooses region

equalizer.

• • • • • •

CLOCK : For setting the clock and

checking the time.

TIMER : With the TIMER function

you can turn CD, USB play and

TUNER reception on or o at a

desired time.

SET : Conrms the setting.

SMART DJ : Selects SMART DJ

mode. (For more information refer

to the page 24

JUKE BOX :

Selects JUKE BOX mode.

Makes your favorites list.

EFFECT LEVEL +/- : Adjusts

SMART DJ eect sound level.

CM8430-AB_DUSALLK_ENG.indd 15 2013-01-24 �� 8:09:18

2 Connecting

Connecting16

Connecting

How to Affix the

Ferrite Core(For EMI

only)

Affix the Ferrite Core for

power cord (For EMI only,

CM8530, CM8430)

You must ax a ferrite core in order to reduce or

eliminate electrical interference.

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the power cord around the ferrite core

once.

3. Close the ferrite core until it clicks.

Affix the Ferrite Core for

lighting cable (For EMI only,

CM8530, CM8430)

Before connecting speaker’s lighting cable, you

should ax ferrite core in order to reduce or

eliminate electrical interference.

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the speaker lighing cables around the

ferrite core twice.

3. Close the ferrite core until it clicks.

CM8430-AB_DUSALLK_ENG.indd 16 2013-01-24 �� 8:09:20

Connecting 17

Connecting

Connecting to speakers

Before connecting (CM8530

only)

You have to position the unit and the speakers

before connecting the speakers. Note that the

illustrations below are dier from the actual unit.

The following illustrations show an example of the

positioning which is the left side of the main unit.

Positioning the speakers

: Non-skid pad

1. Attach the non-skid pads to the right side of

subwoofer.

2. Lay the subwoofer down as the illustration

above.

: Non-skid pad

Surround

speaker

Stacking

board

Subwoofer

3. Put the stacking board on the subwoofer.

4. Place the front and the surround speakers on

the stacking board firmly.

5. Attach the non-skid pads between the front and

the surround speakers for preventing scratchs.

Positioning the main unit and the

speakers

Speaker ductSpeaker duct

20 cm

(7.9 inch)

20 cm

(7.9 inch)

The speaker ducts of subwoofer have to be faced

opposite the main unit. Otherwise it may result

in a malfunction of the main unit.

The subwoofer have to be placed at a distance

of about 20 cm (7.9 inch) from the main unit.

Front

speaker

Surround speaker

Front speaker

CM8430-AB_DUSALLK_ENG.indd 17 2013-01-24 �� 8:09:21

Connecting18

Connecting

Connecting to speakers

Connect the speaker cable plugs to the SPEAKERS

connector. Make sure to connect the speaker’s plug

to the corresponding speaker connector when

connecting the plug.

CM8530

Color Speaker

Grey SURR R

Red FRONT R

Orange SUB WOOFER 1

Orange SUB WOOFER 2

Blue SURR L

White FRONT L

CM8430

Color Speaker

Red FRONT R

Orange SUB WOOFER

White FRONT L

CM8330

Color Speaker

Red FRONT R

White FRONT L

Do not try to lift the speaker alone. It needs

two persons to lift the speaker. Otherwise

it may result in the speaker malfunction

and cause personal injury and/or property

damage.

Check the volume level before playing

music to prevent inrm, child, and pregnant

women from being shocked by the sudden

and loud sound from the unit.

Do not use the unit in a limited space.

It may damage a person’s hearing. It is

recommended to use it in a wide space.

Be careful to make sure children not to put

their hands or any objects into the *speaker

duct.

*Speaker duct: A hole for plentiful bass

sound on speaker cabinet (enclosure).

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or

PC monitor screen. Please use the speakers

far away from either TV screen or PC

monitor.

Make sure to install the speaker with other

people in order to prevent it from falling

and causing injuries to the installer.

Caution

CM8430-AB_DUSALLK_ENG.indd 18 2013-01-24 �� 8:09:21

Connecting 19

Connecting

Attaching the speaker

light cables to the unit (For

CM8530, CM8430)

Connect the speaker’s lighting cables on the

speakers to the SPEAKER LIGHTING SYSTEM jack on

the unit.

Make sure to connect the cables to

connectors tightly on the unit.

Make sure that the jacks and the speakers

are matched correctly.

Caution

CM8430-AB_DUSALLK_ENG.indd 19 2013-01-24 �� 8:09:22

Connecting20

Connecting

Optional Equipment

Connection

AUX IN Connection

Connect an output of auxiliary device(Camcoder,

TV, Player, etc) to the AUX IN (L/R) connector.

If your device has only one output for audio(mono),

connect it to the left (white) audio jack on the unit.

PORT. IN Connection

Connect an output (earphone or line out) of

portable device (MP3 or PMP etc) to the

PORT. IN connector.

Portable cable

MP3 player etc.

Listening to music from your

portable player or external

device

The unit can be used to play the music from many

types of portable player or external device.

1. Connect the portable player to the PORT. IN

connector of the unit.

Connect the external device to the AUX IN

connector of the unit.

2. Turn the power on by pressing

3. Select the PORTABLE or AUX function by using

FUNCTION.

4. Turn on the portable player or external device

and start it playing.

CM8430-AB_DUSALLK_ENG.indd 20 2013-01-24 �� 8:09:22

Page is loading ...

LG CM8430 Owner's manual

Brand: LG

Model: CM8430

Category: Home audio sets

Type: Owner's manual

Download PDF

report

LG CM8430 Owner's manual

LG CM8430 Owner's manual

Related papers

Other documents