LG CM9660 User manual

OWNER’S MANUAL

Mini Hi-Fi

System

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

CM9960 (CM9960, CMS9960F)

www.lg.com

*MFL69365151*

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance, contact

an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure. To prevent

direct exposure to laser beam, do not try to open the

enclosure.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

Getting Started 3

Getting Started

1

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a

dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the appliance.

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the battery

from the equipment: Remove the old battery or

battery pack, follow the steps in reverse order than

the assembly. To prevent contamination of the

environment and bring on possible threat to human

and animal health, the old battery or the battery

put it in the appropriate container at designated

collection points. Do not dispose of batteries or

battery together with other waste. It is recommended

that you use local, free reimbursement systems

batteries and accumulators. The battery shall not be

exposed to excessive heat such as sunshine, re or

the like.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Getting Started4

Getting Started

1

Disposal of your old appliance

1. This crossed-out wheeled bin

symbol indicates that waste

electrical and electronic products

(WEEE) should be disposed of

separately from the municipal

waste stream.

2. Old electrical products can contain hazardous

substances so correct disposal of your old

appliance will help prevent potential negative

consequences for the environment and human

health. Your old appliance may contain reusable

parts that could be used to repair other products,

and other valuable materials that can be recycled

to conserve limited resources.

3. You can take your appliance either to the shop

where you purchased the product, or contact

your local government waste office for details of

your nearest authorised WEEE collection point.

For the most up to date information for your

country please see www.lg.com/global/recycling

Disposal of waste batteries/accumulators

Pb

1. This symbol may be combined with chemical

symbols for mercury (Hg), cadmium (Cd) or lead

(Pb) if the battery contains more than 0.0005%

of mercury, 0.002% of cadmium or 0.004% of

lead.

2. All batteries/accumulators should be disposed

separately from the municipal waste stream via

designated collection facilities appointed by the

government or the local authorities.

3. The correct disposal of your old batteries/

accumulators will help to prevent potential

negative consequences for the environment,

animal and human health.

4. For more detailed information about disposal of

your old batteries/ accumulators, please contact

your city office, waste disposal service or the

shop where you purchased the product. (http://

www.lg.com/global/sustainability/environment/

take-back-recycling/global-network-europe)

Getting Started 5

Getting Started

1

Declaration of Conformity

Hereby, LG Electronics European Shared Service

Center B.V., declares that this MINI HI-FI SYSTEM

is compliant with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

The complete Declaration of Conformity may be

requested through the following postal address:

LG Electronics European Shared Service Center B.V.

Krijgsman 1

1186 DM Amstelveen

The Netherlands

or can be requested at our dedicated DoC website:

http://www.lg.com/global/support/cedoc/cedoc#

This device is a 2.4 GHz wideband transmission

system, intended for use in all EU member states and

EFTA countries.

Symbols

~

Refers to alternating current(AC).

0

Refers to direct current(DC).

Refers to class II equipment.

1

Refers to stand-by.

!

Refers to “ON” (power).

Refers to dangerous voltage.

Note: Do not look directly at the light emitting part

when the LIGHTING is turned on.

If the illumination brightness is glaring, switch on the

room lights or turn off the LIGHTING of the unit.

Table of Contents6

Table of Contents

1 Getting Started

2 Safety Information

8 Unique Features

9 Playable file Requirement

9 – Music file requirement

9 – Compatible USB Devices

9 – USB device requirement

10 Remote control

12 Front panel

12 Rear panel

13 Top panel

2 Connecting

15 How to Affix the Ferrite Core

15 – About Ferrite Core

15 Connecting to speakers

16 Optional Equipment Connection

16 – AUX IN Connection

17 – PORT. IN Connection

17 – USB Connection

18 – Antenna Connection

3 Operating

19 Basic Operations

19 – CD/USB Operations

19 – Auto Play

20 – Selecting a folder and an MP3/WMA file

21 – Deleting an MP3/WMA file

21 Playback Effect

21 – DJ EFFECT

21 – SCRATCH Effect

22 – AUTO DJ

22 – DJ PRO

22 – Adjusting TEMPO

23 – MIX

23 – AUTO SYNC

24 Using BLUETOOTH® wireless technology

24 – Listening to music stored on the Bluetooth

devices

26 Using the Music Flow Bluetooth App

26 – About “Music Flow Bluetooth” App

26 – Install “Music Flow Bluetooth” App onto

Your Bluetooth Device

27 – Activate Bluetooth with “Music Flow

Bluetooth” App

28 Radio Operations

28 – Listening to the radio

28 – Improving poor FM reception

28 – Presetting the Radio Stations

28 – Deleting all the saved stations

29 – Seeing information about a Radio station

30 Sound adjustment

30 – Setting the sound mode

30 – Setting the USER EQ

31 Advanced Operations

31 – Recording to USB

33 – JUKE BOX Playback

34 Other Operations

34 – Turn off the sound temporarily

34 – CHILDSAFE Mode

34 – Displaying file information (ID3 TAG)

34 – DEMO

34 – Using Microphone

35 – Using H/P MODE

35 – VOICE CANCELLER

36 – KEY CHANGER

36 – Lighting Effects

36 – PARTY THRUSTER

Table of Contents 7

1

2

3

4

5

36 Setting the Clock

36 – Setting the Clock through “Music Flow

Bluetooth” App

36 – Using your player as an alarm clock

37 – Sleep Timer Setting

37 – Dimmer

37 Auto power down

38 – AUTO POWER On

38 – Auto function change

39 LG Sound Sync

40 WIRELESS PARTY LINK Connection

4 Troubleshooting

41 Troubleshooting

41 – General

5 Appendix

43 General specifications

44 Speakers specifications

44 Trademarks and Licenses

45 Maintenance

45 – Notes on Discs

45 – Handling the Unit

Getting Started8

Getting Started

1

Unique Features

Bluetooth®

Listens to music stored on your Bluetooth device.

Portable In

Listens to music from your portable device. (MP3,

Notebook, etc.)

Playback effects

Listens to music with various sound and playback

effects.

USB Direct Recording

Records music to your USB device.

Music Flow Bluetooth

Music Flow Bluetooth is an App designed to let you

take control of some of LG’s latest Audio devices.

Refer to page 26.

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

Getting Started 9

Getting Started

1

Playable file

Requirement

Music file requirement

MP3/WMA le compatibility with this unit is limited

as follows.

y Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y Maximum les : Data CD : 999 / USB : 2000

y Maximum folders : Data CD : 99 / USB : 200

y File extensions : “.mp3”/ “.wma”

y Certain MP3/WMA les may not be played

depending on the type or format of the le.

y CD-ROM le format : ISO 9660/ JOLIET

y We recommend that you use Easy-CD Creator,

which creates an ISO 9660 le system.

The DTS is not supported. In case of DTS audio

format, audio is not output.

You have to set the disc format option to [Mastered]

in order to make the discs compatible with the LG

players when formatting rewritable discs. When

setting the option to Live File System, you cannot use

it on LG players.

(Mastered/Live File System : Disc format system for

Windows Vista)

Compatible USB Devices

y MP3 Player : Flash type MP3 player.

y USB Flash Drive :

Devices that support USB2.0 or USB1.1.

y The USB function of this unit does not support all

USB devices.

USB device requirement

y Devices which require additional program

installation when you have connected it to a

computer, are not supported.

y Do not extract the USB device while in operation.

y For a large capacity USB, it may take longer than a

few minute to be searched.

y To prevent data loss, back up all data.

y If you use a USB extension cable or USB hub, the

USB device is not recognized.

y Using NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

y This unit recognizes up to 2,000 les.

y External HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

y USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

y Some USB may not work with this unit.

Getting Started10

Getting Started

1

Remote control

Replacement of battery

(R03)

Remove the battery cover on the rear of the remote

control, and insert the battery with 4 and 5

matched correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Standby/On) : Switches the unit ON or OFF.

B (Open/Close) : Opens and closes the disc tray.

VOL (Volume) +/- : Adjusts speaker volume.

F (Function) : Selects the function and input source.

(Mute): Mutes the sound.

PRESET·FOLDER W/S :

- Searches for a folder of MP3/WMA les. When

a CD/USB containing MP3/WMA les in several

folders is being played, press PRESET·FOLDER

W/S to select the folder you want to play.

- Chooses a preset number for a radio station.

JUKEBOX/MEMORY :

- Stores radio stations.

- Deletes all the saved stations.

- Selects JUKE BOX mode.

- Makes your favorites list.

AUTO DJ : Selects the AUTO DJ mode. (For more

information refer to page 22)

DELETE :

- Deletes MP3/WMA les. (USB only).

- Deletes a song on the programmed list.

Getting Started 11

Getting Started

1

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

REPEAT : Listens to your tracks/les repeatedly or

randomly.

TUNING-/+ : Selects the radio stations.

C/V (Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a track/le.

d/M (Play/Pause) :

- Starts or pauses playback.

- Selects STEREO/MONO.

Z (Stop):

- Stops playback or recording.

- Cancels DELETE function.

SOUND EFFECT : Chooses sound impressions.

REGION EQ : Chooses region equalizer.

INFO / SLEEP

- Sees informations about your music. An MP3 le

often come with ID3 tag. The tag gives the Title,

Artist, Album or Time information.

- Sees the name of connected all Bluetooth device

in Bluetooth mode.

- In status of WIRELESS PARTY LINK Connection,

device name of SLAVE unit appears in the MASTER

unit and Device name of MASTER unit appears in

the SLAVE unit.

- Press and hold to set the system to turn off

automatically at a specified time.

(Dimmer : The display window will be darkened by

half.)

• • • • • • • • • • • • • • c • • • • • • • • • • • • •

0 to 9 numerical buttons : Selects numbered tracks,

les, or preset number.

CLOCK : Sets a clock and checks a time.

ALARM : With the ALARM function you can turn CD,

USB play and Tuner reception on at a desired time.

• • • • • • • • • • • • • • d • • • • • • • • • • • • •

VOICE CANCELLER : You can enjoy the function

while playing the music, by reducing singer vocal of

music in the various source.

DJ EFFECT : Selects DJ EFFECT mode. (Refer to

page 21)

RDS/SET :

- RDS (Radio Data System)

- Conrms the setting.

KEY CHANGER ( / ) : Changes the key to suit

your vocal range.

DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.

PTY : Searches radio stations by radio type.

USB REC : USB direct recording.

Getting Started12

Getting Started

1

Front panel

a

b dc e f

a Disc tray

b

Remote Sensor

c HEADPHONE

Connects a headphone.

d PORT. (Portable) IN

Connects a portable device.

e DANCE LIGHTING (Lighting ball)

- Shows the various lighting patterns and color.

- You can control angle up and down with your

nger.

f MIC (Microphone) 1/2

Connects a microphone.

Rear panel

a b d e fc

a Power cord

y Connect the power cord to wall outlet

directly if possible. Or when you use an

extension cable, it is highly recommended

to use an extension cable of 110 V / 15 A

or 230 V / 15 A, otherwise the unit may

not operate properly because of the lack of

power supply.

y Do not overload the extension cord with

excessive electrical load.

>

Caution

b AUX IN 1/2 (L/R)

c ANTENNA (FM)

d R SPEAKERS

Connects the right speaker’s cables.

e L SPEAKERS

Connects the left speaker’s cables.

f SPEAKER LIGHTING

Connects the speaker lighting cables.

Getting Started 13

Getting Started

1

Top panel

jk lih opnm

32 1 zyx

c

d

e

f

g

w

q

r

s

t

a

b u

v

a 1/!(Standby/On)

b SCRATCH / LEVEL CONTROL, SEARCH KNOB

(A SIDE)

- Turns clockwise or counterclockwise to make

the scratch sound.

- Turns clockwise or counterclockwise to control

the DJ EFFECT level.

- Turns clockwise or counterclockwise to search

to the next/previous le or next/previous folder.

(CD/USB 1 only)

c SEARCH (A SIDE)

Searches to the next/previous le or next/

previous folder by pressing SEARCH repeatedly.

(CD/USB 1 only)

d OK (A SIDE)

Selects the desired le or folder after searching a

le or folder. (CD/USB 1 only)

e H/P MODE

Presses to select a headphone monitor mode.

f H/P VOLUME

Presses to select a headphone’s volume control

mode.

g MIC (Microphone) VOLUME

Presses to select a microphone’s volume control

mode.

h BASS BLAST

Selects BASS BLAST effect directly.

i LIGHTING

Changes the lighting patterns and colors or turns

off the lighting effects of DANCE LIGHTING and

SPEAKER LIGHTING.

j DJ PRO PAD

Presses a desired sound pad.

k AUTO SYNC

When using MIX, you can synchronize the tempo

of audio les being played in USB 1 and USB 2 by

pressing AUTO SYNC.

l Cross fader

Adjusts the sound volume of mixing les when

using MIX ON by pressing MIX.

m MIX

Mixes audio sound.

n PARTY THRUSTER

Slide the lever to create a party atmosphere.

o REGION EQ

Chooses region equalizer.

p B EJECT

Opens and closes the disc tray.

q KEY CHANGER (b/#)

Changes the key to suit your vocal range.

r VOICE CANCELLER

You can enjoy the function while playing the

music, by reducing singer vocal of music in the

various source.

s SEARCH (B SIDE)

Searches to the next/previous le or next/

previous folder by pressing SEARCH repeatedly.

(USB 2 only)

t OK (B SIDE)

Selects the desired le or folder after searching a

le or folder. (USB 2 only)

Getting Started14

Getting Started

1

u SCRATCH / LEVEL CONTROL, SEARCH KNOB

(B SIDE)

- Turns clockwise or counterclockwise to make

the scratch sound.

- Turns clockwise or counterclockwise to control

the USER EQ level.

- Turns clockwise or counterclockwise to search

to the next/previous le or next/previous folder.

(USB 2 only)

v F (Function) / WIRELESS LINK

- Selects the function and input source.

- Press and hold for 3 seconds to select

WIRELESS PARTY LINK mode.

w USB REC / DEMO

- Records to USB 1.

- Copys USB 2 to USB 1.

- Shows Demo mode.

x USER EQ

Selects the sound effect created by your own.

y Basic controls (USB 2 only)

Y/U (Skip/Search)

Skips Fast backward or Forward. /

Searches for a section within a track/le.

T (Play/Pause)

Starts or pauses playback.

I (Stop)

Stops playback or cancels DELETE function.

z A / B TEMPO

Adjusts TEMPO in USB function.

VOLUME

Adjusts speaker, microphone or headphone

volume.

1 USB a / USB b

You can play or record sound les by connecting

the USB device.

2 Basic controls (CD / USB 1 / BLUETOOTH /

RADIO only)

Y/U (Skip/Search)

- Skips Fast backward or Forward. /

Searches for a section within a track/le.

- Selects the radio stations.

T (Play/Pause)

- Starts or pauses playback.

- Selects Stereo/Mono.

I (Stop), RDS

- Stops playback or cancels DELETE function.

- Radio Data System.

3 DJ EFFECT

Selects a desired DJ effect.

2 Connecting

Connecting 15

Connecting

2

How to Affix the Ferrite

Core

Ferrite core may not be provided depending on each

nation’s regulations.

About Ferrite Core

You must afx a ferrite core in order to reduce or

eliminate electrical interference.

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the L SPEAKERS cables around the ferrite

core twice.

Wind the R SPEAKERS cables around the ferrite

core twice.

Wind the LEFT and RIGHT SPEAKER LIGHTING

cables all together around the ferrite core twice.

3. Close the ferrite core until it clicks.

Connecting to speakers

Connect the speaker cable plugs to the SPEAKERS

connector.

To connect the speaker light cable to the unit, insert

the cable to SPEAKER LIGHTING connectors on the

unit.

y

Make sure that the jacks and the speakers

are matched correctly.

y

Make sure to connect the cables to

connectors tightly on the unit.

>

Caution

Connecting16

Connecting

2

y

Do not try to lift the speaker alone. It needs

two persons to lift the speaker. Otherwise

it may result in the speaker malfunction

and cause personal injury and/or property

damage.

y

When you connect the speakers to the unit,

make sure to connect the speaker’s cable and

plug to the corresponding speaker connector.

y

The speakers must be placed a minimum

of 20 cm from the unit for preventing the

vibration caused by the speakers.

y

Check the volume level before playing music

to prevent inrm, child, and pregnant women

from being shocked by the sudden and loud

sound from the unit.

y

Do not use the unit in a limited space. It may

damage a person’s hearing. It is recommended

to use it in a wide space.

y

Be careful to make sure children not to put

their hands or any objects into the opening

speaker duct hole.

y

Use the speaker supplied with this unit

only. Using any other speaker may cause

malfunction.

y

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or PC

monitor screen. Please use the speakers far

away from either TV screen or PC monitor.

y

Avoid looking at the speaker lights for a long

time. It may cause damage to eyesight.

>

Caution

Optional Equipment

Connection

AUX IN Connection

Connect an output of auxiliary device (Camcorder, TV,

Player, etc) to the AUX IN 1/2 (L/R) connector.

If your device has only one output for audio (mono),

connect it to the left audio jack on the unit.

Audio cable

DVD, Blu-ray player etc.

Red

White

20 cm

Connecting 17

Connecting

2

PORT. IN Connection

Connect an output (earphone or line out) of portable

device (MP3 or PMP etc) to the PORT. IN connector.

Portable cable

MP3 player etc.

Listening to music from your portable

player or external device

The unit can be used to play the music from many

types of portable player or external device.

1. Connect the portable player to the PORT. IN

connector of the unit.

Or

Connect the external device to the AUX IN 1/2

(L/R) connector of the unit.

2. Turn the power on by pressing

1

on the remote

control or

1

/

!

on the unit.

3. Press F on the remote control or F / WIRELESS

LINK on the unit to select AUX 1, AUX 2 or

PORTABLE function.

4. Turn on the portable player or external device and

start it playing.

Automatically switches to the PORTABLE

function when you connect the portable device

to the PORT. IN connector.

,

Note

USB Connection

Connect a USB device (or MP3 player, etc.) to the

USB ports on the unit.

USB device

Removing the USB device from the unit :

1. Choose a different function/mode or

press

Z

on the remote control or

I

on

the unit twice in a row.

2. Remove the USB device from the unit.

,

Note

Connecting18

Connecting

2

Antenna Connection

Connect the supplied FM antenna for listening to the

radio.

Connect the FM wire antenna to the FM antenna

connector.

FM antenna

Be sure to fully extend the FM wire antenna.

,

Note

3 Operating

Operating 19

Operating

3

Basic Operations

CD/USB Operations

1. Insert the disc by pressing

B

on the remote

control or

B

EJECT on the unit or connect the

USB device to the USB port.

2. Select CD or USB function by pressing F on the

remote control or F / WIRELESS LINK on the unit.

To Do this

Stop

Press

Z

on the remote control or

I

on the unit.

Playback

Press

d

/

M

on the remote control or

T

on the unit.

Pause

Press

d

/

M

on the remote control or

T

on the unit during playback.

Searching

for a section

within a track/

le

Press and hold

C

/

V

on the

remote control or

Y

/

U

on the

unit during playback and release it at

the point you want to listen to.

Selecting

a track/le

directly

Press 0 to 9 numerical buttons on

the remote control to go to the

desired le or track directly.

Skipping to

the next/

- In stop status,

Press

C

/

V

on the remote

control or

Y

/

U

on the unit to

go to the next/previous track/le.

- During Playback,

By using

C/V

buttons :

Press

V

on the remote control or

U

on the unit to go to the next

track/le.

Playing less than 2 seconds, press

C

on the remote control or

Y

on the unit to go to the previous

track/le.

Playing after 3 seconds, press

C

on the remote control or

Y

on

the unit to go to the beginning of

the track/le.

Playing

repeatedly or

randomly

Press REPEAT on the remote

control repeatedly. Refer to the note

for details about the display change.

y

The display changes in the following order.

USB MP3/WMA CD Audio CD

REPEAT TRK

REPEAT *DIR

REPEAT ALL

RANDOM

OFF

REPEAT TRK

REPEAT DIR

REPEAT ALL

RANDOM

OFF

REPEAT TRK

-

REPEAT ALL

RANDOM

OFF

*DIR : Directory

y

When you play JUKE BOX list, only REPEAT

TRK and REPEAT ALL are available.

y

Even after restarting the unit or switching

one function to another, you can listen to

music from the point where it’s last been

played.

y

The next le name is displayed every 30

seconds. (Except RANDOM play, AUTO DJ

RANDOM play, the last le of playlist, etc.)

y

If you leave the disc tray open for 5 minutes,

it will close automatically.

,

Note

Auto Play

- AUDIO/MP3/WMA CD is played automatically

after disc tray is open and then closed.

- Automatically switches to the CD function if disc

tray is open and then closed when there is no disc

in disc tray.

- When CD or USB is inserted

- If you press

T

on the A SIDE of the unit,

the function is changed to CD or USB 1 and

playback starts. (Except Bluetooth / Tuner

Function)

- If you press

T

on the side B SIDE of the unit,

the function is changed to USB 2 and playback

starts. (except MIXER ON mode)

Operating20

Operating

3

y

When CD or USB is inserted

- Function is changed to CD or USB 1 if

Y

/

U

,

I

, SEARCH on the A SIDE

of the unit is pressed. (Except Bluetooth/

Tuner Function)

- Function is changed to USB 2 if

Y

/

U

,

I

, SEARCH on the B SIDE of the unit is

pressed. (Except MIXER ON mode)

,

Note

Selecting a folder and

an MP3/WMA file

On the unit

1. Press SEARCH and rotate SCRATCH / LEVEL

CONTROL, SEARCH KNOB until a desired file

appears. You can also search a folder if you press

SEARCH again.

2. Press OK or

T

to play the selected file.

When you search a folder, press OK to select a

file in the folder, then press OK or

T

again. The

selected file is played.

On the remote control

1. Press PRESET·FOLDER

W

/

S

on the remote

control repeatedly until a desired folder appears.

2. Press

d

/

M

to play it. The first file of folder will play.

y

CD / USB Folders/Files are recognized as

below.

y

If there is no le in a folder, the folder will not

appear.

y

Folders will be presented as the following

order;

ROOT

FOLDER 1 FOLDER 3

FOLDER 7 FOLDER 8 FOLDER 5

FOLDER 6

y

File will be played from

$

le No.1 to

$

le

No.14 one by one.

y

Files and folders will be presented in order

recorded and may be presented differently

according to the record circumstances.

y

*ROOT : The rst screen you can see when a

computer recognize the USB is “ROOT”.

,

Note

Page is loading ...

LG CM9660 User manual

This manual is also suitable for

LG CM9660 User manual

Related papers

Other documents