Triad 49102-1, 49100-1, 49101-1 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Triad 49102-1 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Triad InCabinet Sub Adaptor - Quick Start Guide
2016.7.15
Contents:
Tools:
(8) #10 x 1-1/2”
Pan Head
Phillips Screws
(1) Size S, G,
or V InCabinet
Sub Adaptor.
Position frame on cabinet base; clear of obstructions
below. Outline the frame’s inside edge for cutting.
Drill pilot holes into cabinet base for
(8) #10 x 1-1/2” Pan Head Phillips Screws.
Cut out hole along outline in case to vent subwoofer.
B
A
C
InCabinet Sub Adaptor - Installation Instructions
Installation:
Prepare InWall/InCeiling Subwoofer by snugly
tightening all 4 retrobracket screws and all 4 grill screws.
Firmly press subwoofer down to seat it securely
into the frame.
If you vent the sub into the room through a toe space grill,
be sure you have enough clear grill opening to avoid compromising
subwoofer performance.
Triad InCeiling M
ini/8 Sub:
Ideal >33 sq in (>213 sq cm); Minimum 16.5 sq in (106 sq cm).
Triad InWall or InCeiling Bronze Sub or SlimSub:
Ideal >53 sq in (>345.2 sq cm); Minimum 29 sq in (187 sq cm).
Triad InWall Silver/15 Sub:
Ideal >78 sq in (>503 sq cm); Minimum 43 sq in (277 sq cm).
F
E
G
Screw frame into cabinet base using
(8) #10 x 1-1/2” Pan Head Phillips screws.
D
CUT HOLE
Note: Failure to fill all 8 inserts completely with screws
can result in unwanted noise and distortion.
/