Triad 49100-1 Installation guide

Triad
Brand
Triad
Model
49100-1
Category
Speaker sets
Type
Installation guide

This manual is also suitable for

Triad InCabinet Sub Adaptor - Quick Start Guide
2016.7.15
Contents:
Tools:
(8) #10 x 1-1/2”
Pan Head
Phillips Screws
(1) Size S, G,
or V InCabinet
Sub Adaptor.
Position frame on cabinet base; clear of obstructions
below. Outline the frame’s inside edge for cutting.
Drill pilot holes into cabinet base for
(8) #10 x 1-1/2” Pan Head Phillips Screws.
Cut out hole along outline in case to vent subwoofer.
B
A
C
InCabinet Sub Adaptor - Installation Instructions
Installation:
Prepare InWall/InCeiling Subwoofer by snugly
tightening all 4 retrobracket screws and all 4 grill screws.
Firmly press subwoofer down to seat it securely
into the frame.
If you vent the sub into the room through a toe space grill,
be sure you have enough clear grill opening to avoid compromising
subwoofer performance.
Triad InCeiling M
ini/8 Sub:
Ideal >33 sq in (>213 sq cm); Minimum 16.5 sq in (106 sq cm).
Triad InWall or InCeiling Bronze Sub or SlimSub:
Ideal >53 sq in (>345.2 sq cm); Minimum 29 sq in (187 sq cm).
Triad InWall Silver/15 Sub:
Ideal >78 sq in (>503 sq cm); Minimum 43 sq in (277 sq cm).
F
E
G
Screw frame into cabinet base using
(8) #10 x 1-1/2” Pan Head Phillips screws.
D
CUT HOLE
Note: Failure to fill all 8 inserts completely with screws
can result in unwanted noise and distortion.
  • Page 1 1

Triad 49100-1 Installation guide

Triad
Brand
Triad
Model
49100-1
Category
Speaker sets
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents