Vega VEGAMET 141 Operating instructions

Operating Instructions

Compact controller and display

instrument for level sensors

VEGAMET 141

4 … 20 mA

Document ID: 63728

2

Contents

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

Contents

1 About this document ............................................................................................................... 4

1.1 Function ........................................................................................................................... 4

1.2 Target group ..................................................................................................................... 4

1.3 Symbols used................................................................................................................... 4

2 For your safety ......................................................................................................................... 5

2.1 Authorised personnel ....................................................................................................... 5

2.2 Appropriate use ................................................................................................................ 5

2.3 Warning about incorrect use ............................................................................................. 5

2.4 General safety instructions ............................................................................................... 5

2.5 Installation and operation in the USA and Canada ........................................................... 6

2.6 Safety instructions for Ex areas ........................................................................................ 6

3 Product description ................................................................................................................. 7

3.1 Conguration .................................................................................................................... 7

3.2 Principle of operation........................................................................................................ 9

3.3 Adjustment ....................................................................................................................... 9

3.4 Packaging, transport and storage ................................................................................... 10

4 Mounting ................................................................................................................................. 11

4.1 General instructions ....................................................................................................... 11

5 Connecting to power supply ................................................................................................. 12

5.1 Preparing the connection ............................................................................................... 12

5.2 Sensor input mode active/passive .................................................................................. 12

5.3 Connecting ..................................................................................................................... 12

5.4 Wiring plan ..................................................................................................................... 13

5.5 Switch-on phase............................................................................................................. 14

6 Access protection .................................................................................................................. 15

6.1 Bluetooth radio interface ................................................................................................ 15

6.2 Protection of the parameterization .................................................................................. 15

6.3 Storing the codes in myVEGA ........................................................................................ 16

7 Set up with the integrated display and adjustment unit .................................................... 17

7.1 Adjustment system ......................................................................................................... 17

7.2 Measured value and menu item display ......................................................................... 18

7.3 Menu overview ............................................................................................................... 19

7.4 Setup steps .................................................................................................................... 20

8 Setup with smartphone/tablet (Bluetooth) .......................................................................... 26

8.1 Preparations ................................................................................................................... 26

8.2 Connecting ..................................................................................................................... 26

8.3 Parameter adjustment .................................................................................................... 27

9 Setup with PC/notebook (Bluetooth) ................................................................................... 28

9.1 Preparations ................................................................................................................... 28

9.2 Connecting ..................................................................................................................... 28

9.3 Parameter adjustment .................................................................................................... 29

10 Applications and functions ................................................................................................... 30

10.1 Levelmeasurementinstoragetankswithoverllprotection/dryrunprotection .............. 30

10.2 Pump station with pump control function ........................................................................ 33

3

Contents

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

10.3 Flowmeasurementume/weir ........................................................................................ 40

11 Diagnostics and servicing .................................................................................................... 44

11.1 Maintenance .................................................................................................................. 44

11.2 Rectify faults ................................................................................................................... 44

11.3 Diagnosis, fault messages ............................................................................................. 44

11.4 Software update ............................................................................................................. 46

11.5 How to proceed if a repair is necessary .......................................................................... 47

12 Dismount................................................................................................................................. 48

12.1 Dismounting steps.......................................................................................................... 48

12.2 Disposal ......................................................................................................................... 48

13 Certicatesandapprovals .................................................................................................... 49

13.1 Radio licenses ................................................................................................................ 49

13.2 Approvals for Ex areas ................................................................................................... 49

13.3 Approvalsasoverllprotection ....................................................................................... 49

13.4 EU conformity ................................................................................................................. 49

13.5 Environment management system ................................................................................. 49

14 Supplement ............................................................................................................................ 50

14.1 Technical data ................................................................................................................ 50

14.2 Overview applications/functionality ................................................................................ 52

14.3 Dimensions .................................................................................................................... 55

14.4 Industrial property rights ................................................................................................. 56

14.5 Licensing information for open source software ............................................................. 56

14.6 Trademark ...................................................................................................................... 56

Editing status: 2021-01-27

4

1 About this document

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

1 About this document

1.1 Function

This instruction provides all the information you need for mounting,

connection and setup as well as important instructions for mainte-

nance,faultrectication,theexchangeofpartsandthesafetyofthe

user. Please read this information before putting the instrument into

operation and keep this manual accessible in the immediate vicinity

of the device.

1.2 Target group

This operating instructions manual is directed to trained personnel.

Thecontentsofthismanualmustbemadeavailabletothequalied

personnel and implemented.

1.3 Symbols used

Document ID

This symbol on the front page of this instruction refers to the Docu-

ment ID. By entering the Document ID on www.vega.com you will

reach the document download.

Information, note, tip: This symbol indicates helpful additional infor-

mation and tips for successful work.

Note: This symbol indicates notes to prevent failures, malfunctions,

damage to devices or plants.

Caution: Non-observance of the information marked with this symbol

may result in personal injury.

Warning: Non-observance of the information marked with this symbol

may result in serious or fatal personal injury.

Danger: Non-observance of the information marked with this symbol

results in serious or fatal personal injury.

Ex applications

This symbol indicates special instructions for Ex applications.

•

List

The dot set in front indicates a list with no implied sequence.

1 Sequence of actions

Numbers set in front indicate successive steps in a procedure.

Battery disposal

This symbol indicates special information about the disposal of bat-

teries and accumulators.

5

2 For your safety

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

2 For your safety

2.1 Authorised personnel

All operations described in this documentation must be carried out

onlybytrained,qualiedpersonnelauthorisedbytheplantoperator.

During work on and with the device, the required personal protective

equipment must always be worn.

2.2 Appropriate use

VEGAMET 141 is a universal controller for connection of a

4 … 20 mA sensor.

Youcannddetailedinformationabouttheareaofapplicationin

chapter " Product description".

Operational reliability is ensured only if the instrument is properly

usedaccordingtothespecicationsintheoperatinginstructions

manual as well as possible supplementary instructions.

2.3 Warning about incorrect use

Inappropriate or incorrect use of this product can give rise to applica-

tion-specichazards,e.g.vesseloverllthroughincorrectmounting

or adjustment. Damage to property and persons or environmental

contamination can result. Also, the protective characteristics of the

instrument can be impaired.

2.4 General safety instructions

This is a state-of-the-art instrument complying with all prevailing

regulations and directives. The instrument must only be operated in a

technicallyawlessandreliablecondition.Theoperatorisresponsi-

ble for the trouble-free operation of the instrument. When measuring

aggressive or corrosive media that can cause a dangerous situation

if the instrument malfunctions, the operator has to implement suitable

measures to make sure the instrument is functioning properly.

During the entire duration of use, the user is obliged to determine the

compliance of the necessary occupational safety measures with the

current valid rules and regulations and also take note of new regula-

tions.

The safety instructions in this operating instructions manual, the na-

tional installation standards as well as the valid safety regulations and

accident prevention rules must be observed by the user.

For safety and warranty reasons, any invasive work on the device

beyond that described in the operating instructions manual may be

carried out only by personnel authorised by the manufacturer. Arbi-

traryconversionsormodicationsareexplicitlyforbidden.Forsafety

reasons,onlytheaccessoryspeciedbythemanufacturermustbe

used.

To avoid any danger, the safety approval markings and safety tips on

the device must also be observed.

6

2 For your safety

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

2.5 Installation and operation in the USA and

Canada

This information is only valid for USA and Canada. Hence the follow-

ing text is only available in the English language.

Installations in the US shall comply with the relevant requirements of

the National Electrical Code (ANSI/NFPA 70).

Installations in Canada shall comply with the relevant requirements of

the Canadian Electrical Code.

2.6 Safety instructions for Ex areas

For Ex applications, only devices with corresponding Ex approval may

beused.ObservetheEx-specicsafetyinstructions.Thesearean

integral part of the operating instructions and are enclosed with every

device with Ex approval.

7

3 Product description

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

3 Product description

3.1 Conguration

The scope of delivery encompasses:

•

Controller VEGAMET 141

•

Two clamping elements for panel mounting

•

Ex separating wall (only for Ex version)

•

Information sheet " Documents and software" with:

– Instrument serial number

– QR code with link for direct scanning

•

Information sheet " PINs and Codes" with:

– Bluetooth access code

•

Information sheet " Access protection" with:

– Bluetooth access code

– Emergency Bluetooth unlock code

– Emergency device code

The further scope of delivery encompasses:

•

Documentation

– Ex-specic"Safety instructions" (with Ex versions)

– Radio licenses

– Ifnecessary,furthercerticates

Note:

Optional instrument features are also described in this operating

instructions manual. The respective scope of delivery results from the

orderspecication.

This operating instructions manual applies to the following instrument

versions:

•

Hardware version from 1.0.0

•

Software version from 1.10.0

Scope of delivery

Scope of this operating

instructions

8

3 Product description

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

2

5

2

3

4

1

Fig. 1: VEGAMET 141

1 Mounting clip for carrier rail mounting

2 Connection terminals

3 HART communication sockets

4 Housing with type label and connection diagrams

5 Display and adjustment unit

Thetypelabelcontainsthemostimportantdataforidenticationand

use of the instrument:

•

Instrument type

•

Information about approvals

•

Technical data

•

Serial number of the instrument

•

QR code for device documentation

•

Number code for Bluetooth access

•

Manufacturer information

Move to " www.vega.com"andenterinthesearcheldtheserial

number of your instrument.

Thereyoucanndthefollowinginformationabouttheinstrument:

•

Order data

•

Documentation

•

Software

Alternatively,youcanndallviayoursmartphone:

•

Scan the QR-code on the type label of the device or

•

Enter serial number manually in the VEGA Tools app (available

free of charge in the respective stores)

Information:

If the serial number or the QR code on the type label cannot be read,

they can be found additionally on the display cover inside the device.

Constituent parts

Type label

Documents and software

9

3 Product description

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

3.2 Principle of operation

Controller VEGAMET 141 feeds the connected 4 … 20 mA sensor,

processes the measured values and displays them. The compact

design is ideal for mounting on carrier rails in switching cabinets. A

graphic display as well as a turn/push button for quick on-site control

of the measuring point are also integrated.

Itenablessimplepumpcontrol,owmeasurementonopenchan-

nels and weirs and totalization. With the VEGAMET 141, limit values

canbereliablymonitoredandrelayscanbeswitched,e.g.foroverll

protection according to WHG.

Due to its various possibilities it is suitable for many industrial

branches as well as plant manufacturers.

The VEGAMET 141 controller can power the connected sensor and

process its measurement signals. The requested parameter is shown

on the display and also output to the integrated current output for fur-

ther processing. The measurement signal can thus be transferred to a

remote display or a superordinate control system. Operating relays for

control of pumps or other devices are also integrated.

3.3 Adjustment

On-site operation of the device is carried out via the integrated display

and adjustment unit. It consists of a graphic display and a central turn/

push button for menu adjustment.

The optionally integrated Bluetooth module enables in addition a wire-

less adjustment of VEGAMET 141 via standard adjustment tool:

•

Smartphone/tablet (iOS or Android operating system)

•

PC/notebook with Bluetooth LE or Bluetooth USB adapter (Win-

dows operating system)

Information:

Certain setting options are not possible or only possible to a limited

extent with the integrated display and adjustment unit, for example the

settingsforowmeasurementorpumpcontrol.Fortheseapplica-

tions, the use of PACTware/DTM or the VEGA Tools app is recom-

mended. An overview of the available applications and functions as

well as their adjustment options can be found in the appendix.

Application area

Functional principle

Local adjustment

Wireless adjustment

10

3 Product description

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

1

3

2

Fig. 2: Wireless connection to standard adjustment tools with integrated

Bluetooth LE or alternatively Bluetooth USB adapter.

1 VEGAMET 141

2 Smartphone/Tablet

3 PC/Notebook

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.

The packaging consists of environment-friendly, recyclable card-

board. For special versions, PE foam or PE foil is also used. Dispose

of the packaging material via specialised recycling companies.

Transport must be carried out in due consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.

Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter " Supplement -

Technical data - Ambient conditions"

•

Relative humidity 20 … 85 %

Packaging

Transport

Transport inspection

Storage

Storage and transport

temperature

11

4 Mounting

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

4 Mounting

4.1 General instructions

VEGAMET 141 is designed for carrier rail mounting (top hat rail

35 x 7.5 according to DIN EN 50022/60715). Due to its protection

rating of IP20, the instrument is suitable for mounting in switching

cabinets. It must be mounted vertically.

A VEGAMET 141 in Ex version is an auxiliary, intrinsically safe instru-

ment and may not be installed in explosion-endangered areas.

The instrument is suitable for standard and extended ambient condi-

tions acc. to DIN/EN/IEC/ANSI/ISA/UL/CSA 61010-1.

Makesurethattheenvironmentalandambientconditionsspeciedin

chapter " Technical data" are maintained.

Mounting options

Ambient conditions

12

5 Connecting to power supply

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

5 Connecting to power supply

5.1 Preparing the connection

Always keep in mind the following safety instructions:

•

The electrical connection must only be carried out by trained,

qualiedpersonnelauthorisedbytheplantoperator.

•

If overvoltage surges are expected, overvoltage arresters should

be installed.

Warning:

Only connect or disconnect in de-energized state.

Thedataforpowersupplyarespeciedinchapter"Technical data".

The voltage supply is connected with standard cable according to the

national installation standards.

Standard two-wire cable can be used to connect the sensors.

Note:

If the temperatures are too high, the cable insulation can be dam-

aged. Hence keep apart from the ambient temperature also the self-

heating of the instrument for the temperature resistance of the cable

in the connection compartment in mind

1)

.

When used in the USA/Canada, only cables with copper conductors

may be used.

5.2 Sensor input mode active/passive

Through the selection of the terminals, you can choose between ac-

tive and passive operation of the sensor input.

•

In active mode, the controller provides the power for the con-

nected sensors. Power and measurement data are transmitted

over the same two-wire cable. This mode is provided for connec-

tion of measuring transducers without separate power supply

(sensors in two-wire version).

•

In passive mode the sensors are not powered, only the measured

value is transmitted. This input is for connection of transmitters

with their own separate voltage supply (sensors in four-wire ver-

sion). The VEGAMET 141 can also be looped into the existing

circuit like a normal ammeter.

Note:

With a VEGAMET 141 in Ex version, the passive input is not available.

5.3 Connecting

The power supply and the inputs and outputs are connected via

removablescrewterminals.Youcanndinformationonthemax.wire

cross-section in the technical data.

Safety instructions

Voltage supply

Connection cable

Connection technology

1)

 Withanambienttemperature≥50°C(122°F)theconnectioncableshould

besuitableforanambienttemperaturewhichisatleast20°C(36°F)higher.

13

5 Connecting to power supply

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

Connect the device as described in the following wiring plan.

5.4 Wiring plan

67 68 69

64 65 66

61 62 63

1 2 3

41 42

+ -

91 92

L+ N-

1

3

4

7

6

5

2

Fig. 3: Wiring plan VEGAMET 141

1 Sensor input (active/passive)

2)

2 HART sockets for connection of a VEGACONNECT

3 4 … 20 mA current output

4 Voltage supply of the controller

5 Relay output 1

6 Relay output 2

7 Relay output 3

Connecting

2)

Passive input not available for Ex version

14

5 Connecting to power supply

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

Detail sensor connection 1

3

1

5

4

2

+-+-

1 2

3

1 2

3

Fig. 4: Sensor input connection for two-wire/four-wire sensor (active/passive)

1 Active input with sensor supply for two-wire sensor

2 Passive input without sensor supply for four-wire sensor

3)

3 Two-wire sensor

4 Four-wire sensor

5 Voltage supply for four-wire sensor

5.5 Switch-on phase

Afterswitchingon,thedevicerstcarriesoutashortself-check.

•

Internal check of the electronics

•

Output signals are set to failure, background lighting of the display

lights red

The current measured values are then displayed and transmitted to

the outputs. The background lighting of the display changes to white.

3)

Passive input not available for Ex version

15

6 Access protection

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

6 Access protection

6.1 Bluetooth radio interface

Devices with a Bluetooth radio interface are protected against un-

wanted access from outside. This means that only authorized persons

can receive measured and status values and change device settings

via this interface.

Information:

If no Bluetooth connection to the device should be possible, Bluetooth

communication can be deactivated. Access via app or DTM is thus no

longer possible. The Bluetooth function can be deactivated/activated

in the menu item " Extended functions" under " Access protection -

Bluetooth communication".

A Bluetooth access code is required to establish Bluetooth com-

munication via the adjustment tool (smartphone/tablet/notebook).

This code must be entered once when Bluetooth communication is

establishedforthersttimeintheadjustmenttool.Itisthenstoredin

the adjustment tool and does not have to be entered again.

The Bluetooth access code is individual for each device. It is printed

on the device housing and is also supplied with the device in the

information sheet " PINs and Codes". The Bluetooth access code can

also be read out via the display and adjustment unit.

TheBluetoothaccesscodecanbechangedbytheuseraftertherst

connection is established. If the Bluetooth access code is entered

incorrectly, the new entry is only possible after a waiting period has

elapsed. The waiting time increases with each further incorrect entry.

The emergency Bluetooth access code enables Bluetooth communi-

cation to be established in the event that the Bluetooth access code

is no longer known. It can't be changed. The emergency Bluetooth

access code can be found in information sheet " Access protection".

If this document is lost, the emergency Bluetooth access code can

be retrieved from your personal contact person after legitimation.

The storage and transmission of Bluetooth access codes is always

encrypted (SHA 256 algorithm).

6.2 Protection of the parameterization

The settings (parameters) of the device can be protected against un-

wanted changes. The parameter protection is deactivated on delivery,

all settings can be made.

To protect the parameterization, the device can be locked by the user

with the aid of a freely selectable device code. The settings (param-

eters) can then only be read out, but not changed. The device code

is also stored in the adjustment tool. However, unlike the Bluetooth

access code, it must be re-entered for each unlock. When using the

adjustment app or DTM, the stored device code is then suggested to

the user for unlocking.

Bluetooth access code

Emergency Bluetooth

unlock code

Device code

16

6 Access protection

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

The emergency device code allows unlocking the device in case the

device code is no longer known. It can't be changed. The emergency

device code can also be found on the supplied information sheet " Ac-

cess protection". If this document is lost, the emergency device code

can be retrieved from your personal contact person after legitimation.

The storage and transmission of the device codes is always encrypt-

ed (SHA 256 algorithm).

6.3 Storing the codes in myVEGA

If the user has a " myVEGA" account, then the Bluetooth access code

as well as the device code are additionally stored in his account under

" PINs and Codes".Thisgreatlysimpliestheuseofadditionaladjust-

ment tools, as all Bluetooth access and device codes are automati-

cally synchronized when connected to the " myVEGA" account

Emergency device code

17

7 Set up with the integrated display and adjustment unit

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

7 Set up with the integrated display and

adjustment unit

7.1 Adjustment system

The integrated display and adjustment unit is used for measured

value display, adjustment and diagnosis of the VEGAMET 141. Dis-

play and adjustment are carried out via the central turn/push buttons

and a graphic-capable display with background lighting.

Certain setting options are not possible or only possible to a limited

extent with the integrated display and adjustment unit, for example the

settingsforowmeasurementorpumpcontrol.Fortheseapplica-

tions, the use of PACTware/DTM or the VEGA Tools app is recom-

mended. A tabular overview of the corresponding applications and

functions can be found in the appendix.

2

3

4

1

5

6

Fig. 5: Display and adjustment elements

1 LC display

2 Status indication relay

3 Status indication fault signal

4 Status indication operation

5 Turn/push button for menu adjustment

6 HART communication sockets

Via the HART communication sockets, a parameter adjustment of

the connected HART sensors can be carried out without interrupting

themeasuringcircuit.Theresistorrequiredforthispurpose(230Ω)

is already integrated in VEGAMET 141. The sockets have an inner

diameter of 2 mm for direct connection of a VEGACONNECT or other

HART modems. The adjustment of the connected sensor is carried

out via the VEGA Tools app or via PACTware and appropriate DTM.

Function

Display and adjustment

elements

HART communication

sockets

18

7 Set up with the integrated display and adjustment unit

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

Turn/Push button Function

Short pressure Entry to the menu level

Jump to selected menu item

Edit parameter

Select editing position

Save value

Turn Change between the measured value indications

Navigation in the menu items

Change parameter values

Long pressure Jump to next higher menu

Key pressing longer than 2 s, direct return to the

measured value indication

Cancel input without saving

Approx. 60 minutes after the last pressing of a key, an automatic reset

tomeasuredvalueindicationistriggered.Anyvaluesnotconrmed

will not be saved.

7.2 Measured value and menu item display

The measured value display shows the digital display value, the

measuring loop name (measuring loop TAG) and the unit. In addition,

an analogue bar graph can be displayed. Up to three measured value

indicationswithamaximumthreedierentmeasuredvaluescanbe

congured.Ifpumpcontrolisactivated,anadditionalstatusbarwith

display of the assigned pumps is available.

Measured values are displayed according to the following presenta-

tion:

1

2

3

5

4

6

7

TAG-No. 1

%

32.38

1

2

Fig. 6: Example of a measured value indication - measured value with bar graph

1 Measurement loop name

2 Measured value

3 Unit

4 Status message acc. to NAMUR NE 107

5 Status bar for pump control

6 Bargraph measured value

7 Display active measured value indication

The display is equipped with a background lighting for better visibility.

It serves simultaneously as a status display which is also visible from

Functions turn/push

button

Time functions

Measured value indica-

tion

Status display/back-

ground lighting

19

7 Set up with the integrated display and adjustment unit

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

a great distance. The colour of the background lighting changes in the

delivery status according to NAMUR NE 107.

•

White: Error-free operation

•

Red: Failure, error, fault

•

Orange: Function check

•

Blue: Maintenance required

•

Yellow:Outsidethespecication

Alternatively, the status display can also show the switching status of

therelaysormeasuredvaluerangesindividuallywithfreelydenable

colours.Uptovemeasuredvalueranges,e.g.,dependingonthe

llinglevel,canbedisplayedindierentcolours.Thebackground

lightingcanalsobeconguredtoashinanycolourasanadditional

signalling option.

Information:

ThisindividualcoloursignallingisconguredwithPACTware/DTMor

the VEGA Tools app.

The menu items are displayed according to the following presentation:

1

2

Max. Adjustment

Sensor value at 100% :

Actual measured sensor value:

12.726

mA

20.000

mA

Fig. 7: Example of a menu item view - Max. adjustment

1 Sensor measured value at 100 %

2 Current sensor measured value

7.3 Menu overview

Description Basic settings

Damping Time setting for damping

Linearisation Linearization settings

Adjustment Adjustment settings

Scaling Scaling settings

Outputs Relay/current output settings

Description Basic settings

Number of measured

value indications

Number of displayed measured value indications

Measured value indi-

cation

Settings for the measured value displays, automatic

change of the measured value display

Menu item display

Measurement loop

Indication

20

7 Set up with the integrated display and adjustment unit

VEGAMET 141 • 4 … 20 mA

63728-EN-210129

Description Basic settings

Options Display options e.g. brightness, contrast, illumina-

tion

Menu language Language settings

Description Basic settings

Fail safe relay Activate/deactivate fail safe relay

Access protection Access protection for Bluetooth and protection of

the parameter adjustment

Reset Reset of the device

Description Basic settings

Status Status indication, e.g. device, sensor, relay

Simulation Simulation function

Device-TAG Display device name

Device information Device information, e.g. serial number

7.4 Setup steps

Through parameter adjustment, the instrument is adapted to the indi-

vidual application conditions. A measurement loop calibration is the

most important step and should always be carried out. A scaling of

the measured value to the desired physical variable and unit, possibly

including a linearisation curve, is often useful. The adaptation of the

relay switching points or the setting of an integration time to smooth

the measured value are further standard adjustment options.

Information:

When using PACTware and the respective DTM or the VEGA Tools

app, additional settings can be carried out which are not possible or

only partly possible with the integrated display and adjustment unit.

Communication takes place via the built-in Bluetooth interface.

Thedeviceisconguredexworksforuniversalapplications.The

followingapplicationscanbechangedoverandconguredviathe

VEGA Tools app or the DTM:

•

Universal

•

Level storage tank

•

Wells

•

Pumping station

•

Sewage screw lifting station

•

Flowmeasurementume/weir

Information:

An overview of the available applications and functions can be found

in the appendix

Extended functions

Diagnostics

Parameter adjustment

Applications

Page is loading ...

Vega VEGAMET 141 Operating instructions

Related papers

Other documents