Landoll Agricultural Seeders User manual

®

LANDOLL COMPANY, LLC

1900 North Street

Marysville, Kansas 66508

(785) 562-5381

800-428-5655 ~ WWW.LANDOLL.COM

‘

9K713-2306

Mid-Size

Sure Stand Seeder

Models SS108/SS110/SS112

SSP108/SSP110/SSP112

Operator’s Manual

Manuals for Mid-Size Sure Stand Seeder,

Models SS108/SS110/SS112 and SSP108/SSP110/SSP112

Manual Number Manual Type

9K713 Operator’s Manual

9K712 Parts Manual

DANGER

Failure to comply with this warning may result

in serious injury or possibly death.

DO NOT operate or perform any maintenance tasks on this

equipment until you have completed the following:

1. Receive proper training to operate this equipment safely.

2. Read and understand the operator’s manual.

3. Be thoroughly trained on inspection and repair procedures.

i

Table of Contents

1 Safety Information

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Description of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Owner Assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Warranty Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Understanding Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

High Power Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Transporting Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Safety Instructions for Towing Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Attaching, Detaching and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Maintenance Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Protective Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Prepare for Emergencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Tire Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Chemical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

2 Assembly

3-PT Hitch Seeder Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Pull Type Seeder Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Tire and Wheel Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Hydraulic Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Purge the Hydraulic Lift System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Warning Lamp Installation, 8FT and 10FT . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Warning Lamp Installation, 12FT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Electric Clutch Kit - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Brillion Elite Mini Monitor - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Brillion Elite Mini Monitor Electrical Schematic . . . . . . . . . . . . . . . . . . . . . . 2-18

Brillion Elite Mini Monitor - Ground Speed Sensor . . . . . . . . . . . . . . . . . . . 2-18

Brillion Elite Mini Monitor - Front Seed Box Seed Shaft Sensor . . . . . . . . . 2-19

Brillion Elite Mini Monitor - Bin Level Sensor . . . . . . . . . . . . . . . . . . . . . . . 2-19

Brillion Elite Mini Monitor Tractor Installation - Optional . . . . . . . . . . . . . . . . . 2-20

Acre Meter Kit - Optional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Console w/Clutch Control Installation - Optional. . . . . . . . . . . . . . . . . . . . . . . 2-24

Console w/Clutch Control Seed Shaft Sensor - Optional . . . . . . . . . . . . . . . . 2-25

Console w/Clutch Control Tractor Installation - Optional . . . . . . . . . . . . . . . . 2-26

Scraper Kit, Tube Mounted - Optional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

S-Tine Tire Track Remover Kit - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32

Coil Tine Track Remover - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

ii 9K713-2306

TABLE OF CONTENTS

3 Operation

Tractor Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Tractor Preparation for Attaching 3-PT Seeder . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Attaching/Detaching 3-PT Hitch Seeder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Tractor Preparation for Attaching Pull Type Seeder. . . . . . . . . . . . . . . . . . . . . 3-5

Attaching/Detaching Pull Type Seeder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Hydraulic Lift System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Transmission Electric Clutch - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Brillion Elite Mini Monitor - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Console w/Clutch Control - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Seed Box Seed Rate Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Transmission Drive Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Calibration for Unlisted Seeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Speed-Up Kit - Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Loup Acre Meter Kit - Optional (After 05/15/2012) . . . . . . . . . . . . . . . . . . . . . 3-14

Loup Acre Meter Kit - Optional (Before 05/15/2012) . . . . . . . . . . . . . . . . . . . 3-15

Transporting the Seeder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

4 Brillion Elite Mini Monitor

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Main Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Speed & Icon Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Field & Total Acres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Settings Menu - Speed Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Speed Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Speed Source Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Speed Source Icon Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Pulses Per Revolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Wheel Pulses Per 400FT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Radar Pulses Per 400FT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Speed (Simulated Speed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Speed Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Implement Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Implement Switch Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Settings Menu - Clutch Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Settings Menu - Install Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Learn New System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Remove A Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Add A Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Settings Menu - Shaft Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Seed Shaft Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Settings Menu - Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Settings Menu - GPS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

iii

TABLE OF CONTENTS

GPS Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

GPS Baudrate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

GPS Speed Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Settings Menu - Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Clock (Date & Time) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

System Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Update App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Service And Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

5 Maintenance

General Torque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Hydraulic Fitting Torque Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Wheel Hub Bearing Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Lubrication Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Hydraulic Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Front and Rear Roller Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Chain Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Seed Meter Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Warning Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Scraper Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Electric Clutch - Optional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Acre Meter Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

6 Specifications

iv 9K713-2306

TABLE OF CONTENTS

9K713-2306 1-1

TABLE OF CONTENTS Chapter 1

Safety Information

Introduction

The implement described in this manual has been

designed with care and built by skilled workers using

quality materials and processes. Proper assembly,

maintenance and safe operation will allow this machine to

provide you with satisfactory use for seasons to come.

DANGER

Description of Unit

The Brillion Sure Stand Agriculture Seeder provides

precision seed metering and accurate seed depth

placement, offering optimum germination. The SS1

Series Seeder offers more capacity by utilizing a

Mid-Size Seed Box with Micro-Meters, spaced 4-1/4"

for an even better distribution of small seed varieties.

Micro-Meters can be adjusted to permit precise metering

with an infinite range of settings. Units are available in

3-PT Hitch and Drawbar.

Using this Manual

This manual will familiarize you with safety, assembly,

operation, adjustment, and maintenance. Read this

manual and follow the recommendations to help ensure

safe and efficient operation.

• The information in this manual is current at time of

printing. Some parts may change to assure top

performance.

• Location reference: Right and Left designations in this

manual are determined by facing the direction the

machine will travel during field operation, unless

otherwise stated.

Owner Assistance

If customer service or repairs are needed, contact your

Brillion dealer. Implement parts should only be replaced

with Brillion parts. Have the Serial Number and complete

Model Number available when ordering parts from your

Brillion dealer. If items covered in this manual are not

understood, contact your local Brillion dealer.

Warranty Registration

Brillion Farm Equipment, by Landoll, shall have no

warranty obligation unless each product is registered,

within 10 days of retail purchase, using the Landoll

Company, LLC Ag Products on-line registration process.

Please refer to the Ag Products Policy and Procedures

Manual, accessible at www.landoll.com for step by step

instructions regarding product registration.

Enter your product information below for quick reference.

Refer to the ID Plate as shown in Figure 1-1. The ID

Plate is located on the right front of the machine.

MODEL NUMBER

SERIAL NUMBER

DATE OF PURCHASE

Figure 1-1: ID Plate

Read this entire manual before attempting to

assemble, adjust or operate this machine. Failure

to comply with this warning can result in personal

injury or death, damage to the machine or its

components and inferior operation.

MODEL #

SERIAL #

MADE IN USA 1-573-010006

Landoll Company, LLC

Marysville, Kansas

www.landoll.com

1-2 9K713-2306

SAFETY INFORMATION

TABLE OF CONTENTS

Safety

NOTE

Investigation has shown that nearly 1/3 of all farm

accidents are caused by careless use of machinery.

Insist that all people working with you or for you abide by

all safety instructions.

Understanding Safety

Statements

You will find various types of safety information on the

following pages and on the machine decals (signs)

attached to the implement. This section explains their

meaning.

NOTICE

CAUTION

WARNING

DANGER

NOTE

You should read and understand the information

contained in this manual and on the machine decals

before you attempt to operate or maintain this equipment.

• Examine safety decals and be sure you have the

correct safety decals for the machine. See Figure 1-3.

• Order replacement decals through your Brillion

dealer.

• Keep these signs clean so they can be observed

readily. It is important to keep these decals cleaned

more frequently than the machine. Wash with soap

and water or a cleaning solution as required.

• Replace decals that become damaged or lost. Also,

be sure that any new machine components installed

during repair include decals which are assigned to

them by the manufacturer.

• When applying decals to the machine, be sure to

clean the surface to remove any dirt or residue.

Where possible, sign placement should protect the

sign from abrasion, damage, or obstruction from mud,

dirt, oil etc.

DANGER

High Power Magnet

The Brillion Elite Mini Monitor uses very powerful

Neodymium Magnets. Read all the warnings before

operating the machine.

WARNING

Special notice - read and thoroughly understand.

Proceed with caution. Failure to heed caution

may cause injury to person or damage product.

Proceed with caution. Failure to heed warning will

cause injury to person or damage product.

Proceed with extreme caution. Failure to heed

notice will cause injury or death to person and/or

damage product.

• Do not allow anyone to ride on tractor or

machine. Riders could be struck by foreign

objects or thrown from the machine.

• Never allow children to operate equipment.

• Keep bystanders away from machine during

operation.

1. Neodymium Magnets are brittle; they can be

broken or can splinter in a collision. One

should wear gloves and protective glasses

when handling these magnets, because

splinters and/or spacers could disengage and

fly from the magnets.

2. Normal Neodymium Magnets will lose their

magnetic properties if heated above 175°F

(80° C).

3. The strong magnetic fields of Neodymium

Magnets can damage items such as

televisions, computer monitors, credit cards,

bank cards, computers, diskettes and other

data carriers, video tapes, mechanical

watches, hearing aides, loud speakers and

VCRs. Pace-Makers may be damaged or

switch to “Test Mode” in the presence of a

strong magnetic force, if a Pace-Maker or

other electrical body implant is in use, Keep a

Minimum of 3 Feet Distance.

4. Children should not be allowed to handle

Neodymium Magnets as they can be

dangerous. Small magnets pose a choking

hazard and should never be swallowed or

inserted into any part of the body.

5. Under no circumstances should you try to cut,

saw or drill the Neodymium Magnet! Not only

would the magnet break, but the resulting dust

from the magnet is very flammable.

Neodymium Magnets should never be burned,

as burning them will create toxic fumes.

SAFETY INFORMATION

9K713-2306 1-3

TABLE OF CONTENTS

Transporting Safety

IMPORTANT

It is the responsibility of the owner/operator to

comply with all state and local laws.

• When transporting the machine on a road or highway,

use adequate warning symbols, reflectors, lights and

slow moving vehicle sign as required. Slow moving

tractors and towed implements can create a hazard

when driven on public roads. They are difficult to see,

especially at night.

• Do not tow an implement that, when fully loaded,

weighs more than 1.5 times the weight of the towing

vehicle.

• Carry reflectors or flags to mark tractor and implement

in case of breakdown on the road.

• Do not transport at speeds over 20 MPH under good

conditions. Never travel at a speed which does not

allow adequate control of steering and stopping.

Reduce speed if towed load is not equipped with

brakes

• Avoid sudden stops or turns because the weight of the

machine may cause the operator to lose control of the

tractor.

• Use caution when towing behind articulated steering

tractors; fast or sharp turns may cause the machine to

shift sideways.

• Keep clear of overhead power lines and other

obstructions when transporting. Know transport height

and width of your machine. See "Specifications" on

Pages 6-1 through 6-3.

Safety Instructions for Towing

Vehicles

The maximum travel speed is the lesser of

• The limit of the road conditions;

• The maximum specified ground speed;

— for towing operations as indicated in this manual

or SIS;

— of the towed vehicle as indicated in its operator’s

manual, SIS, or information sign;

• The maximum ground speed of the towed equipment

combination shall be limited to the lowest specified

ground speed of any of the towed machines. This

speed is the ground speed limitation.

EXAMPLE: If the tractor is capable of 25 mph, the first

implement has a SIS for 19 mph, and the last

implement’s operator’s manual states its specified

ground speed is 15 mph, the towed equipment

combination ground speed limitation is 15 mph.

Attaching, Detaching and

Storage

• Do not stand between the tractor and machine when

attaching or detaching machine unless both are not

moving.

• Before applying pressure to the hydraulic system, be

sure all connections are tight and that hydraulic hoses

are not damaged.

• Completely raise machine and install transport locks. If

desired to store lowered and on unpaved surface,

place hardwood blocks under roller to keep off ground.

• Block implement so it will not roll when unhitched from

the tractor.

• Relieve pressure in hydraulic lines before uncoupling

hydraulic hoses from tractor.

• Use the Safety Chain to help control drawn machinery

should it separate from the tractor drawbar.

NOTE

To relieve hydraulic pressure: Depending on tractor

hydraulic system, some can be relieved by actuating

control lever after engine is stopped. If tractor has electric

over hydraulic controls, it may be necessary to move the

control lever to the float position. Refer to Tractor’s

Operator’s Manual.

Wear protective gloves and safety glasses and goggles

when working with hydraulic systems.

Maintenance Safety

• Block the machine so it will not roll when working on

or under it to prevent injury.

• Transport Locks installed.

• Do not make adjustments or lubricate machine while it

is in motion.

• Make sure all moving parts have stopped and all

system pressure is relieved.

• Understand the procedure before doing the work. Use

proper tools and equipment.

Protective Equipment

• Wear protective clothing and equipment appropriate

for the job. Avoid loose fitting clothing.

• Because prolonged exposure to loud noise can cause

hearing impairment or hearing loss, wear suitable

hearing protection, such as earmuffs or earplugs.

Prepare for Emergencies

• Keep a First Aid Kit and Fire Extinguisher handy

• Keep emergency numbers for doctor, ambulance,

hospital and fire department near phone.

1-4 9K713-2306

SAFETY INFORMATION

TABLE OF CONTENTS

Tire Safety

Tire changing can be dangerous and should be performed

by trained personnel using correct tools and equipment.

• When inflating tires, use a clip-on chuck and

extension hose long enough to allow you to stand to

one side, not in front of or over the tire assembly. Use

a safety cage if available.

• When removing and installing wheels, use wheel-

handling equipment adequate for weight involved.

Chemical Safety

Agricultural chemicals can be dangerous. Improper use can

seriously injure persons, animals, plants, soil & property.

• Read chemical manufacturer’s instructions and store

or dispose of unused chemicals as specified. Handle

chemicals with care & avoid inhaling smoke from any

type of chemical fire.

• Store or dispose of unused chemicals as specified by

the chemical manufacturer.

High Pressure Fluid Safety

Escaping fluid under pressure can be nearly invisible and

have enough force to penetrate the skin causing serious

injury. Use a piece of cardboard, rather than hands, to

search for suspected leaks.

• Any fluid injected into the skin must be surgically

removed within a few hours or gangrene may result.

• Avoid the hazard by relieving pressure before

disconnecting hydraulic lines.

NOTE

To relieve hydraulic pressure: Depending on tractor

hydraulic system, some can be relieved by actuating

control lever after engine is stopped. If tractor has electric

over hydraulic controls, it may be necessary to move the

control lever to the float position. Refer to Tractor’s

Operator’s Manual.

Wear protective gloves and safety glasses and goggles

when working with hydraulic systems.

Safety Chain

1. Use the Safety Chain to help control drawn machinery

should it separate from the Tractor Drawbar.

2. Use a chain with a strength rating equal to or greater

than the gross weight of towed machinery, which is

10,100 pounds minimum in accordance with ASAE

S338.2 specifications. If two or more machines are

pulled in tandem, a larger chain may be required.

Chain capacity must be greater than the total weight

of all towed implements.

A second chain should be used between each

implement.

3. Attach the chain to the Tractor Drawbar Support or

specified anchor location. Never attach the chain to

an intermediate support. Allow only enough slack in

the chain to permit turning. The distance from Hitch

Pin to attachment point or intermediate support point

should not exceed 9 inches. See Figure 1-2. If the

distance from the Drawbar Pin to either the front or

rear chain attachment point exceeds 9 inches,

intermediate chain support is required. See Tractor

Operator’s Manual.

4. Replace chain if any links or end fittings are broken,

stretched or damaged.

5. Do not use a Safety Chain for towing.

Figure 1-2: Safety Chain

9" Max

Optional

Hitch Orientation

Drawbar

Support

Locknut, 3/4-10

Bolt,

3/4-10 x 2 1/4

Tractor

Drawbar

Safety Chain

Flat

Washer,3/4"

Safety Chain

Intermediate

Support

SAFETY INFORMATION

9K713-2306 1-5

TABLE OF CONTENTS

Decals

Figure 1-3: Decals

ITEM 4

528933

ITEM 9

528934

ITEM 5

528938

ITEM 1

4K039

WARNING

MOVING PART HAZARD

TO PREVENT SERIOUS INJURY FROM

MOVING PARTS:

KEEP COVERS CLOSED DURING OPERATION.

DO NOT ALLOW ANYONE TO RIDE OR CLIMB

MACHINE DURING OPERATION.

KEEP OBSERVERS AWAY.

2K123

ITEM 6

2K123

CAUTION

MOVING MACHINES CAN CAUSE INJURY. KEEP AWAY!

1. KEEP AWAY FROM MOVING TRACTORS OR IMPLEMENTS.

KEEP OTHERS AWAY.

2. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON TRACTOR

OR IMPLEMENT.

3. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN

UNHITCHED FROM TRACTOR.

4. KEEP ALL GUARDS AND SHIELDS IN PLACE WHILE

MACHINE OR PARTS ARE IN MOTION. 8J309

ITEM 8

8J309

Sure-Stand

4K401

ITEM 2

4K387

13 TOOTH

DRIVER

(26 TOOTH

OPTIONAL)

37 TOOTH

DRIVEN

15/16 HEX

13 TOOTH

IDLER

TIGHTENER

7 TOOTH

DRIVER

12 TOOTH

DRIVEN

#A550 CHAIN

#40 CHAIN

TIGHTENER

*

* WILL CRACK SOME SEEDS AT THESE SETTINGS.

NOT RECOMMENDED: LENTILS, SORGHUM, SUDAN GRASS

9K348 FOR SS108, SS110, SS112 SEEDER

1. RATES ARE FOR 13 TOOTH DRIVER. DOUBLE THESE VALUES FOR 26 TOOTH DRIVER.

2. RATES ARE INTENDED AS A GUIDE ONLY. VARIATIONS IN SIZE AND CLEANLINESS WILL AFFECT RATES.

CHECK ACREAGE AND POUNDS OF SEED USED FOR BEST RESULTS.

PLANTING RATES

MACHINE MAY BE CALIBRATED FOR UNLISTED SEED AS FOLLOWS:

1. REMOVE DRIVE BOLT FROM 12 TOOTH #A550 CHAIN DRIVEN SPROCKET.

2. RAISE MACHINE AND LOCK IN TRANSPORT POSITION.

3. PLACE A CANVAS OR TARP TO CATCH SEED.

4. TURN 15/16 HEX ON TRANSMISSION CLOCKWISE(CW) AS FOLLOWS:

250 REVOLUTIONS FOR 8 FOOT SEEDER.

200 REVOLUTIONS FOR 10 FOOT SEEDER.

167 REVOLUTIONS FOR 12 FOOT SEEDER.

5. WEIGH SEED FOR APPROXIMATE PLANTING RATE IN POUNDS PER ACRE.

CALIBRATION

**

ITEM 7

9K348

ITEM 12

2P151

ITEM 10

1-573-010006

SS108

4K401

SS110

SS112

9K349

9K350

9K351

PARKING PIN

9J301

ITEM 11

9J301

ITEM 3

MODEL #

SERIAL #

MADE IN USA 1-573-010006

Landoll Company, LLC

Marysville, Kansas

www.landoll.com

CAUTION

BE SURE TO ENGAGE

PARKING PIN ON LEFT END OF

FRAME BEFORE UNHITCHING

TRACTOR. OTHERWISE

FRAME WILL TIP BACKWARDS

ABOUT FRONT AXLE 9J302

ITEM 14

9J302

WARNING

DO NOT GO NEAR LEAKS

High pressure oil easily punctures

skin causing serious injury,

gangrene or death.

If injured, seek emergency medical

help. Immediate surgery is

required to remove oil.

Do not use fingers or skin to

check for leaks.

Lower load or relieve hydraulic

pressure before loosening fittings.

ITEM 13

3K706

AG SEEDER

P/N: 235621

ITEM 16

235621

ITEM 17

9J429

1-6 9K713-2306

SAFETY INFORMATION

TABLE OF CONTENTS

Figure 1-4: Decal Placement - Hitch Decals

13

14

SAFETY INFORMATION

9K713-2306 1-7

TABLE OF CONTENTS

Figure 1-5: Decal Placement - 8FT Models

89

1

9

10

16

17

6

2

3

4

5

7

456

12

1

11

1-8 9K713-2306

SAFETY INFORMATION

TABLE OF CONTENTS

Figure 1-6: Decal Placement - 10FT Models

1

9

10

89

16

17

1

12

45

6

11

2

3

4

5

67

SAFETY INFORMATION

9K713-2306 1-9

TABLE OF CONTENTS

Figure 1-7: Decal Placement - 12FT Models

8

9

10

1

9

16

17

45

1423

5

45

4

456

12

11

67

1-10 9K713-2306

SAFETY INFORMATION

TABLE OF CONTENTS

Table provided for general use.

NOTES:

9K713-2306 2-1

TABLE OF CONTENTS Chapter 2

Assembly

CAUTION

WARNING

NOTE

Refer to the repair parts manual 9K712 for identification of

parts and for the approximate relationship of the parts in

assembly.

To ensure alignment of assemblies, leave the nuts loose

until completion of final assembly. Use Lock Washers or

Flat Washers as specified. Spread all cotter pins.

After completion of final assembly, tighten all nuts evenly

to prevent misalignment, distortion or binding. Tighten all

screws and nuts to the recommended torques.

IMPORTANT

• If a pre-assembled parts or fastener is temporarily

removed, remember where they go. It is best to keep

parts separated.

• Check that all working parts move freely, bolts are

tight and cotter pins are spread.

• Park the seeder in a work area that has a level

surface and make sure it is blocked securely so that

it cannot roll.

• Refer to the Torque Table for proper torque valves.

Note the different torque requirements for Bolts with

Locknuts. See Page 5-1.

“Left” and “Right” refer to directions seen as if standing

behind the machine and facing in the direction of forward

travel.

IMPORTANT

All harnesses must be firmly attached to machine

frame members, so they don’t sag or become torn

loose by field debris. Use the tie wraps provided.

Check to be sure the harnesses at center of machine

is slack enough so as not to be stretched or interfered

with while rotating frame from transport to field

working position and vice versa.

Do not work on or under this machine unless

securely blocked and supported by a hoist or

tractor or by other sufficient means.

Do not attempt to lift heavy parts manually. Use a

hoist or a fork lift to move these parts into

position.

2-2 9K713-2306

ASSEMBLY

TABLE OF CONTENTS

3-PT Hitch Seeder Assembly

When shipped, seeder comes assembled except for

Lights and 3-PT Hitch.

1. Support Seeder Assembly with a hoist or by similar

means capable of supporting its weight without

tipping.

2. Center 3-PT Hitch Assembly in relationship with the

Seed Box Center Bracket. Attach 3-PT Hitch to

Seeder Frame Tube with 5/8-11 U-Bolts, Lock

Washers and Nuts. See Figure 2-5.

3. Install Manual Holder to 3-PT Hitch with Hose Clamps.

4. 8FT Seeders: Install SMV Mount to Seed Box Frame

with 1/2-13 U-Bolt, Lock Washers and Nuts. See

Figure 2-1.

10FT Seeders: Install SMV Mount to Seed Box

Center Bracket with 1/2-13 x 1-1/2 Bolts and

Locknuts. See Figure 2-2.

Figure 2-1: SMV Mount, 8FT

Figure 2-2: SMV Mount, 10FT

CAUTION

5. Be sure Parking Pin is locking Rear Roller down and

raise the Seeder. See Figure 2-3.

Figure 2-3: Parking Pin Engaged

6. On the right side of the Seeder Frame, in a similar

position as the Parking Pin, remove the 5/8-11

Shipping Bolt that also locks the Rear Roller down.

See Figure 2-4.

Figure 2-4: Shipping Bolt

U-Bolt,

1/2-13

Nut,1/2-13

Lock

Washer,1/2

SMV Mount

SMV

Seed Box

Frame

Bolt,

1/2-13 x 1-1/2

Locknut,

3/8-16

Center

Bracket

SMV

Seed Box

SMV Mount

Do not disengage pin unless seeder is fully

attached to a tractor. Seeder may be rear-heavy

and tip backward on frame.

Parking Pin

Klik Pin

Engaged

Bolt,5/8-11

Locknut,5/8-11

Flat Washer,5/8

Page is loading ...

Landoll Agricultural Seeders User manual

Landoll Agricultural Seeders User manual

Related papers

Other documents