2. JasonL
  3. BQDW1111.W.WT

JasonL BQDW1111.W.WT Operating instructions

  • Hello! I've reviewed the assembly instructions for the Quadro Wood A 1100mm x 1100mm Boardroom table which explains the step-by-step process for its assembly, including the required tools and components. I'm ready to answer your questions regarding the table's assembly process.
  • What tools are required for the assembly?
    How many people are required for installation?
    What is the size of the table?
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Page 1 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Table top x1
Leg Quadro Wood A x2
Beam x1
Plastic bracket x4
A
B
C
D
Allen key x2J
M8x20MM CSK x2
M8x20MM Socket head x2
M6x20MM Socket head x4
M6x30mm Socket head x 4
or M6x30 Wood screws x 4 and washers
M6x30mm Mushroom head screw x4
E
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
E F G H
B
A
I
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 6
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Mushroom Head Screw (I) - for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
I
STEP 05
Secure 1000mm beam (C)
using screws provided
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Page 4 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
G
STEP 03
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for both legs (B)
STEP 04
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 06
TOP VIEW
Attach beam (C) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
STEP 07
Page 5 of 6
E
E
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1100mm x 1100mm
Page 6 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 08
Place desktop on top of the frame. Please place the top equally
centred at the same distance from left and right of the leg frame
and make sure that front and back of the top will have the same
distance from the legs frame as well.
STEP 09
Please drill wood screws (H) through the plastic brackets
into the underneath of the Tops.
H
/