2. JasonL
  3. BQDW1811.W.WT

JasonL BQDW1811.W.WT Operating instructions

  • Hello! I have reviewed the assembly instructions for the Quadro Wood A Boardroom table. This document provides a detailed, step-by-step guide on how to assemble the table, including instructions for attaching the legs, beam, and table top. I'm ready to answer your questions about the assembly process.
  • How many people are required for installation?
    What tools are needed for assembly?
    What is the size of the table?
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Table top x1
Leg Quadro Wood A x2
Beam x1
Plastic bracket x4
A
B
C
D
Allen key x2J
M8x20MM CSK x2
M8x20MM Socket head x2
M6x20MM Socket head x4
M6x30mm Socket head x4
M6x30mm Mushroom head screw x4
E
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
A
E F G H
BI
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 7
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Mushroom Head Screw (I) - for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
I
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 4 of 7
F
G
STEP 03
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for both legs (B)
STEP 04
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 05
Adjust extendable beam to desired
length using markers and secure beam
at that length using screws provided
Page 5 of 7
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
Secure 1200mm beam (C)
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 06
TOP VIEW
Attach beam (C) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
STEP 07
Page 6 of 7
E
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1800mm x 1100mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 7 of 7
STEP 08
Place the desktop on top of the frame. Please place the legs ideally
indented around 300mm from each end left and right of the Tops,
Place the legs centred at the same distance equally from the front
and back of the top.
STEP 09
Please drill M6x30MM Socket head (H) through the plastic
brackets into the underneath of the tops.
H
300 mm
/