Newland FM420 Quick start guide

Brand: Newland

Model: FM420

Category: Bar code readers

Type: Quick start guide

Newland FM420 is a versatile barcode scanner equipped with advanced imaging technology, allowing you to capture 1D and 2D barcodes with ease. It features multiple connectivity options, including USB and RS232, providing flexible integration with various systems. The user-friendly design, with intuitive indicators and a compact form factor, makes it suitable for both retail and industrial environments.

V1.0

FM420

Fixed Mount Barcode Scanner

Quick Start

Version Description Date

V 1.0 Support as from FM420 ﬁrmware V 3.06.021 and

higher. 19-10-2010

Revisions

Getting to Start

Unpacking.......................................... E-01

Main Unit........................................... E-01

Accessories ........................................ E-02

Outline and Function ......................... E-03

Data Interface Deﬁnition ................... E-04

Speciﬁcation ...................................... E-05

Distance of Field................................ E-06

Dimentions of FM420 Unit ............... E-07

Connect FM420 to the Host .............. E-08

Programming Code

Query ................................................ E-09

Factory Default .................................. E-10

Reading Mode ................................... E-11

RS232 Programming ......................... E-12

USB Programming ............................ E-15

USB HID-KBW Programming .......... E-16

Beeper ................................................ E-19

Line Feed and Carriage Return.......... E-20

1D Symbols ....................................... E-21

2D Symbols ....................................... E-26

Appendix

A. Testing Codes................................ E-28

B. Digit Code and Save ..................... E-29

C. Troubleshooting ............................ E-30

Content

E-01

请更换节标题

Getting to Start

FM420 »

Unpacking

Unpack and check the main unit and accessories.In case there is any problem, please

contact with your dealer.

Main Unit

E-02

Getting to Start

Accessories

USB Cable »

Accessories

RS232 Cable + Power Adapter »

E-03

Getting to Start

Outline and Function

Indicator

Sensor Light

Illumination/Aiming Light

Lens

Note:

The scan window must be kept clean. Improper maintenance will breach the »

limited warranty.

Avoid rough objects not to damage or scratch the window.

Use brush to remove the stain. »

Use soft cloth (cloth for glasses) to clean. »

Prohibit spraying towards the window. »

Only use clean water as a cleanser. »

E-04

Getting to Start

Data Interface Deﬁnition

PIN 1

PIN 10

Cable Slot

Pin Function Type Name

1 NC Null

2 NC Null

3 VCC P Power DC5V

4 TXD O Serial Port Output，RS232

5 RXD I Serial Port Input，RS232

6 NC Null

7 NC Null

8 GND P Ground

9 D- IO USB Data Signal

10 D+ IO

E-05

Getting to Start

Speciﬁcation

Pin Function Type Name

1 NC Null

2 NC Null

3 VCC P Power DC5V

4 TXD O Serial Port Output，RS232

5 RXD I Serial Port Input，RS232

6 NC Null

7 NC Null

8 GND P Ground

9 D- IO USB Data Signal

10 D+ IO

Image Capture Speciﬁcations

Image Sensor CMOS

Resolution 752*480

Interface RS232, USB

Barcode Scan Speciﬁcations

Symbols

2D PDF417, QR Code(Model 1/2), DataMatrix(ECC200, ECC000, 050,

080, 100,140),Aztec, Maxicode, etc.

1D Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar,

Interleaved 2 of 5, ISBN, Code 93, UCC/EAN-128, GS1 Databar, etc

Precision ≥ 5mil

Depth of Scan Field 35mm-210mm

Print Contrast Ratio ≥ 30%

Sensitivity**

Roll 360°@ 0°Pitch and 0° Skew

Yaw (skew) ±60°@ 0°Roll and 0° Pitch

Pitch ±60°@ 0°Roll and 0° Skew

Illumination Speciﬁcations

Light Source LED (622 nm - 628 nm)

Light Intensity 330 LUX (130 mm )

Electrical and Mechanical Speciﬁcations

Power Consumption 2W

Voltage DC 5V (4.5-5.5)

Current

Working 400mA

Idle 78mA

Standby 18mA

Deep Sleep 800uA

Dimensions(L*W*H) 60.0 *50.0*26.0mm

Weight 70g

Environment Speciﬁcations

Operating Temperature -5℃ - +45℃

Storage Temperature -40℃ - +60℃

Humidity 5% - 95% (non-condensing)

Ambient Illumination 0 ~ 100,000 LUX

Certiﬁcates

FCC Part15 Class B, CE EMC Class B

**Test Condition:

Code39: 4 Bytes ; Resolution = 10mil; W:N = 3:1 ; PCS = 1.0 ;

Barcode Height = 12mm; Distance = 100mm; T=23°C; Illumination= 200 LUX

E-06

Getting to Start

Distance of Field

36°

0 50 100 150 200 250

55mm PDF417(10mil) 175mm

45mm Data Matrix(10mil） 145mm

45mm QR Code(10mil） 140mm

35mm Code39(10mil) 170mm

55mm Code39(15mil) 210mm

45mm Data Matrix(15mil） 175mm

60mm PDF417(15mil) 205mm

50mm QR Code(15mil） 175mm

E-07

Getting to Start

Dimentions of FM420 Unit

50mm

60mm

26mm

12mm 10mm

9mm

36mm

11 7mm.

M3 machine skew

E-08

Getting to Start

Connect FM420 to the Host

Connecting with USB Cable

Insert USB Cable (RJ45 male head) into 1、

FM420 cable slot;

Insert USB Cable (USB male head) into 2、

Host’s (female) USB connector;

Connecting with RS232 Cable

Insert RS232 cable (RJ45 male head) into 1、

FM420 cable slot;

Insert RS232 cable (RS232 male head) 2、

into Host’s (female) RS232 connector;

Connect RS232 cable and the mains with 3、

power adapter;

E-09

请更换节标题

Programming Code

Code Programming ON

Code Programming OFF

Query

“Send Product Info”, the engine sends product information to the

Host immediately.“Send Sys Info when Power ON”, the engine sends

product information through RS232(only) to the Host after Power ON.

The system information is provided as follows:

Title Remarks

Firmware Ver Device Firmware Version

Build Time Device Firmware Version Establishing Time

Device ID Device Type

App Ver Device Application Version

uIMG Ver Device uIMG Version

Date Device Manufacture Date

S/N Device serial number

ESN User-defined device serial number

Manufacture ID Device Name

Interface 1 types of communication interfaces:

RS232, baud rate, parity check, data bits, stop bit

1D Indicate that reading 1D is allowed.

2D Indicate that reading 2D is allowed.

Scan Mode Auto Scan

Send Product Info

Send Sys Info when Power ON Do not Send Product Info when Power ON

(Factory Default)

E-10

Programming Code

Code Programming ON

Code Programming OFF

Factory Default

Part of Factory Default

Subject Factory Default

Interface

RS232 and USB Self-adaption ，The default value is as below：

RS232（Baud Rate: 9600bit/s,Parity Check:No Check,Data / Stop

Bit:8 bits/1 bit); USB(HID-KBW)

Beep On

Scan Mode Auto Mode

1D 1D Symbols（Enable）

Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar,

China post 25,Interleaved 2 of 5, ISBN/ISSN, Code 93, GS1

Databar, Code 11,etc

2D 1D Symbols（Enable）PDF417, QR Code(Model 1/2), DataMatrix (ECC200, ECC000,

050, 080,100,140), Aztec, Maxicode, LP Code, etc.

Load All Factory Default

E-11

Programming Code

Code Programming ON

Code Programming OFF

Reading Mode

Auto Mode: The ambient luminance change in front of the »

engine automatically initiates reading. After completion of reading,

the engine goes to idle. Both luminance change and the Trigger can

initiate reading when idle.

Auto Mode

(Factory Default)

E-12

Code Programming ON

Code Programming OFF

Programming Code

RS232 Programming

Baud Rate

Under RS232 connection, the engine and the Host should set

communication baud rate to the same to keep normal communication.

Baud rate is the bits transmitted per second (8 bits per bytes). The engine

and the Host must communicate at the same baud rate.

The scanner supports baud rate as the following:

9600

（Factory Default）

2400

14400

38400

115200

1200

4800

19200

57600

E-13

Programming Code

Code Programming ON

Code Programming OFF

RS232 Programming

Parity Check

NO Check

(Factory Default)

Even Check

Odd Check

1 Stop Bit

(Factory Default)

2 Stop Bits

Stop Bits

E-14

Programming Code

Code Programming ON

Code Programming OFF

RS232 Programming

Data Bits Transmitted

8 Data Bits

(Factory Default)

7 Data Bits

6 Data Bits

5 Data Bits

E-15

Programming Code

Code Programming ON

Code Programming OFF

USB Programming

Select USB HID-KBW

Select USB DataPipe

Select USB COM Port Emulation

Select USB HID-POS

Note： A driver has to be installed before using USB DataPipe and USB COM Port Emulation.

E-16

Programming Code

Code Programming ON

Code Programming OFF

USB HID-KBW Programming

The keyboard arrangements and country codes vary in different

countries. Refer country codes to the table “USB Country Keyboard

Types”. Follow the steps mentioned below to program.

1.“Code Programming ON”

2.“Select Country Code”

3. Read digit codes (See “country code” and appendix for digit

code)

4.“Save ”

5.“Code Programming OFF”

Select Country Code

Keyboard Coutry

Country/Language Code Country/Language Code

U.S.(Factory Default) 0 Netherlands(Dutch) 14

Belgium 1 Norway 15

Brazil 2 Poland 16

Canada(French) 3 Portugal 17

Czechoslovakia 4 Romania 18

Denmark 5 Russia 19

Finland(Swedish) 6 Slovakia 21

France 7 Spain 22

Germany/Austria 8 Sweden 23

Greece 9 Switzerland(German) 24

Hungary 10 Turkey F 25

Israel(Hebrew) 11 Turkey Q 26

Italy 12 U.K 27

Latin-American 13 Japan 28

Country Code

E-17

Programming Code

Code Programming ON

Code Programming OFF

USB HID-KBW Programming

Keystroke Delay

This parameter sets the delay, in milliseconds, between emulated key-

strokes. Scan programming code below to increase the delay when the Host

require a slower transmission of data.

Short Delay(Continuous keystroke）

（Factory Default)

Medium Delay(20ms)

Long Delay(40ms)

Caps Lock Override

The case of the data is inverted regardless of the state of the Caps Lock key on the Host. Lower

case and upper case are converted correspondingly.

No Caps Lock Override

(Factory Default)

Caps Lock Override

Page is loading ...

Newland FM420 Quick start guide

Brand: Newland

Model: FM420

Category: Bar code readers

Type: Quick start guide

Download PDF

report

Newland FM420 Quick start guide

Newland FM420 Quick start guide

Related papers

Other documents