THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USER’S MANUAL
Air Blower
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
cs@gymaxservice.com
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02
READ AND SAVE THESE INSTRUCTIONS
1. Read and follow all instructions before operating the air
blower.
2. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or has been
damaged in any manner. Return appliance to the
nearest authorized service facility for examination,
repair or adjustment.
3. Do not use an extension cord with this air blower.
4. The appliance must be positioned so that the plug is
accessible.
5. The air blower should never be left unattended when in
use. The appliance is not to be used by children if they
are not supervised by an adult.
6. No objects should cover the air intake when the air
blower is in use, and sand, small stones or other
objects should not be allowed to be sucked into the air
blower.
7. Under no circumstances should a finger or any sharp
object be inserted into the air intake.
8. Unplug from outlet when not in use and before cleaning
or servicing.
9. Do not expose the blower of wet condition to reduce
the risk of electric shock.
10. Do not use an adapter with this product.
11. Do not drop or strike the blower which may result in
malfunction.
03
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, CONNECT ONLY TO AN
OUTLET PROVIDED WITH A GROUND FAULT
CIRCUIT INTERRUPTION DEVICE.
WARNING - To reduce the risk of fire or electric shock,
do not use the blower with any solid-state speed control
device.
WARNING - To reduce the risk of electric shock, Do not
use an extension cord with this air blower.
1. The air blower is first to be placed on the ground and
then attached in place with plastic nails through the
fixing holes.
2. The air blower should be installed in a well-ventilated
location and on a level surface.
INSTALLATION:
1. Connect the plug to AC 120V/60Hz socket.
2. Turn on by pushing “1” firmly. Turn off by pushing “0”.
USING
04
1. To keep the air blower clean you can use a dry cloth to
wipe the surface of the air blower.
2. Never use chemical solutions to clean the blower as
this may damage the coating and plastic parts.
3. Never immerse the air blower in water.
4. The air blower should be stored indoors.
MAINTENANCE AND STORAGE:
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. This product is equipped with a cord having a
grounding wire with an appropriate grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
Check with a qualified electrician or serviceman.
This product is for use on a nominal 120-V circuit and has
a grounding plug similar to the plug illustrated in the
figure below. Only connect the product to an outlet having
the same configuration as the plug. Do not use an adapter
with this product.
05
WARNING
Improper installation of the grounding plug is able to
result in a risk of electric shock. When repair or
replacement of the cord or plug is required, do not
connect the grounding wire to either flat blade terminal.
The wire with insulation having an outer surface that is
green with or without yellow stripes is the grounding wire.
GROUNDING
PIN
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
06
Troubleshooting
The motor does not run
1. The switch is not
activated
2. The circuit is open or
has poor contact
3. Capacitance damage
4. Blocked by hard objects
The motor is running, but
the wheels are scratching
1. The screws on the
impeller are loose
2. There are foreign
objects in the fan
3. The impellers are
deformed.
The motor does not
operate normally
1. Unstable voltage
2. The motor is affected
by humidity
3. Electrical capacity
failure
4. Loose impeller
07
-
1
-
2
-
3
-
4
-
5
-
6
-
7
GYMAX 350-Watt User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Univex 79838 User manual
-
Craftsman 358.799432 User manual
-
Weed Eater WEBV 215 User manual
-
-
-
-
-
-
-