boRn A3 User manual

Type
User manual
Instruction Manual - A3 LED Light Pad with stand
www.officeworks.com.au
Officeworks Ltd. 236-262 East Boundary Road East Bentleigh VIC 3165 A USTRA L I A
Package Contents:
LED light pad, USB cable, Clip stand.
A B
C
E
D
Dimension(HxWxD) 345x470x5mm
Illuminated Area 300x420mm
Rated Input DC5V 2A
Working Current 1.62A
Rated Power 8.1W
Surface Acrylic
Light Source LED
Luminance 398Lumens (+/- 10%)
Scale Size 42x30cm
Net Weight 0.939kg FG
Open
Close
User Instructions:
the protective film.
A) Place the light pad on a dry, flat surface and carefully remove
B) Connect to power supply via USB cable included.
gradually light up.
C) To turn on - Touch the switch gently and the working panel will
light level. Release your finger at the desired brightness and this will
D) To adjust - Hold down the switch until you achieve your desired
set an automatic memory of brightness level.
turn off gradually.
Note: Turn on again - Touch the switch, you will go back to the
last memory of brightness level. Hold down the switch, it can
reach the maximum. Release your finger, then hold down the
switch you can dim the light.
E) To turn off - Touch the switch again and the lighted area should
or portrait. The clip stand can also be used as a pen holder.
F) Slide on/slide off clip stand at the top, for working in either landscape
H) Store the unit in a dust free and dry environment.
G) Flip open centre top section to create the stand.
BOLEDLPA3 Specifications:
  • Page 1 1

boRn A3 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages