2. tempmate
  3. i16MCS100
i16MCS100

tempmate i16MCS100 User manual

  • I've reviewed the user manual for the tempmate i1 single-use temperature indicator. This document provides instructions on how to start the device by breaking the tab, attach it to your shipment and understand the status LED indicators upon delivery. I'm ready to assist with any questions you may have.
  • How do I start the tempmate i1?
    What should I do after starting tempmate i1?
    What does the LED indicate?
    Can I stop the tempmate i1 once it's started?
i
GDP
Good Distribution
Practice
EN 12830
C
E
R
T
I
F
I
E
D
EN 12830
C
E
R
T
I
F
I
E
D
•tempmate.com
01 Break the tab to start the
device – notice that the green
LED flashes three times to
indicate a correct start.
02 Attach the started tempmate.®-i1 to
your shipment.
03 Check the status after recei-
ving the goods.
Frontside
Backside
Operation Instructions
Ok
Lower threshold breached
Upper threshold breached
Expiry Date
LED Indicator
Break Tab
Waterproof Cover
Product Configuration Info
Serial Number
Label
Glue Spot Instructions
User Manual – tempmate.®-i1
Single-Use Temperature Indicator for Cold Chain Temperature Monitoring
Using Notes
˦Take care of the expiry date
˦Don‘t hold the indicator too long in your hand (false alarm through self-heating)
˦Before using, cool or heat the indicator to operating temperature
˦The indicator can only be started, not stopped
˦Only for disposable use
Temperature
– 20°C to +50°C
IP 67
protected
GDP
compliant
EN 12830
compliant
Easy
handling
German
Quality
© tempmate GmbH · V1.1-06/2018-EN · Technical Changes and Errors excepted
tempmate GmbH
Germany
Wannenäckerstr. 41
74078 Heilbronn
T +49 7131 6354 0
F +49 7131 6354 100
info@tempmate.com
www.tempmate.com
/