2. EPH Controls
  3. CDT2-24
CDT2-24

EPH Controls CDT2-24 User manual

  • Hello! I've reviewed the installation instructions for the EPH Controls CDT2-24 Room Thermostat. This document provides guidance on how to install the hardwired thermostat, focusing on safety and proper electrical connections. The thermostat can be installed in three different ways. It's important to follow the instructions provided. I'm ready to answer any questions you might have about this device.
  • Who should install the thermostat?
    What must be done before starting electrical work?
    When should the electrical connections be live?
For use in normal environments.
CDT2-24 Room Thermostat Hardwired Installation Instructions
Page 1 of 1
1
34
5 6
2
Before commencing any work on the electrical connections, you must rst disconnect the thermostat
from the 24Vac supply.
Ensure the electrical connections are not live until the installation has been completed and the housing
is closed.
Only qualied electricians or authorised service sta are permitted to open the thermostat.
There are parts that may carry mains voltage behind the cover. The thermostat must not be left
unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
If the thermostat is used in a way not specied by the manufacturer, its safety may be impaired.
Prior to setting the thermostat, it is neccessary to complete all required settings described in the section.
CAUTION! Installation and connection should only be carried out by a qualied
person and in accordance with national wiring regulations.
This thermostat can be mounted in the following ways:
1) To a recessed conduit box 2) To a surface mounted box 3) Directly mounted on wall
Important: Keep this document
20221006_CDT2-24-DS_Insins_Hw_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.com www.ephcontrols.co.uk
/