JANOME QMPROVERSA User guide

Hello! I've reviewed the software update instructions for the Janome Quilt Maker Pro 18 Versa. This document details how to update your machine's software, which includes improvements to communication speed, stitch regulation and support for a new foot pedal. I'm ready to answer any questions you have about the update process or the new features.
What is the file name for the software update?

What should be done before turning on the machine for the update?

Where can I find software update settings on the machine?

What should I do after the update?

Software Update for the Janome Versa Sit Down

(Version S19)

File name: sensorS19

NOTE: After saving the update ﬁle to the USB stick, please install the USB

stick in the display (on the right side) PRIOR to turning on the machine,

then proceed with the update.

Download Update

DIRECTIONS:

• Select Tool Icon

• Select Update

• Select the sensor icon on the bottom of screen (there will be

three (3) icons: Machine, Display and Sensor

• After ﬁnishing the update power down the machine

and power back up

RELEASE NOTES:

• Added automatic Com Port detection for Versa

• Improved Communication speed between machine

and stitch regulation sensors

• Improved image quality detection of stitch regulation sensors.

• Added stitch regulation ﬁlter to improve regulation

• Added support for new QF01501 analog foot petal

• Fixed status reporting to machine to indicate foot petal type

/

Other documents