2. Barrett
  3. PRC-4090
PRC-4090

Barrett PRC-4090 Installation guide

  • Hello! I've reviewed the user manual for the BARRETT PRC-4090 TACTICAL HF SDR Transceiver. This document provides step-by-step instructions on how to assemble the SDS unit onto the anti-vibration plate. It outlines the proper placement, alignment, and securing of the components. I am ready to answer your questions about the assembly process or device itself.
  • How should the SDS be placed on the Anti-Vibration Plate?
    What is the next step after placing the SDS?
    How to secure the SDS?
135
BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - INSTALLATION
Assembly
1. Place the SDS on top of the Anti-Vibration Plate, ensuring that the feet and
capstans are correctly aligned and drop into the keyway slots.
2. Push the SDS towards the rear of the anti-vibration plate, as shown below,
so that the capstans and SDS click into place.
3. To secure the SDS, rst ensure that the lock clamps are connected to the
slots on the front of the SDS, then turn the fasteners a quarter turn.
/