LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex User manual

SÉRIE NEON SLEEVE SERIES Top View Flex
Brand
LUMENTRUSS
Model
SÉRIE NEON SLEEVE SERIES Top View Flex
Type
User manual

LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex offers versatile lighting solutions with its flexible design and variable installation options. It allows for curved or straight installations with a minimum inner bend radius of 150mm (6in) and can be used for up/down bends, ensuring adaptability to various spaces and requirements. With the included mounting brackets and screws, installation is made simple and secure.

LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex offers versatile lighting solutions with its flexible design and variable installation options. It allows for curved or straight installations with a minimum inner bend radius of 150mm (6in) and can be used for up/down bends, ensuring adaptability to various spaces and requirements. With the included mounting brackets and screws, installation is made simple and secure.

Home » LUMENTRUSS » LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex Instruction Manual
LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex Instruction Manual
Contents
1 FEUILLE D’INSTALLATION / INSTALLATION SHEET
2 ENDCAPS AND WIRING OPTIONS
3 WIREWAY EXAMPLE
4 NSTALLATION OPTIONS
5 MISE EN GARDE / WARNING
6 COMPOSANTS COMPONENT PARTS
7 ELECTRICAL CONNECTIONS
8 WIRING DIAGRAMS
9 LINE VOLTAGE CONNECTION (POWER SUPPLY TO AC
MAINS)
10 Documents / Resources
10.1 References
11 Related Posts
LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex
Instruction Manual
Manuals+ — User Manuals Simplified.
FEUILLE D’INSTALLATION / INSTALLATION SHEET
Install the mounting brackets (a) on the desired surface using provided
screws (b).
Install the Neon Sleeve (c) into brackets. Make electrical connections (pp.3-4).
ENDCAPS AND WIRING OPTIONS
Front Hardwire
Front DC Plug
Closed Endcap
WIREWAY EXAMPLE
NSTALLATION OPTIONS
Curved installation – min. inner bend radius 150mm (6”).
Straight installation.
MISE EN GARDE / WARNING
Minimum inner bend radius 150mm (6in).
LT_ Neon-Sleeve-Top-View-Flex_ IS
Up/down bend. The Neon Sleeve can only be bent in the direction perpendicular to the LED strip (see diagram
below).
UP/DOWN BEND
DO NOT PULL
DO NOT BEND
DO NOT TWIST
DO NOT PIERCE
FRAGILE ELECTRONIC COMPONENTS HANDLE WITH GREAT CARE
COMPOSANTS COMPONENT PARTS
a- PVC brackets
b- Mounting screws
c- TVF Neon Sleeve d0, d1 – Endcaps
e- LED tape
ELECTRICAL CONNECTIONS
WARNING: RISK OF ELECTRIC SHOCK
To prevent electric shock, power should be turned off from the electrical panel before installation or maintenance
process. INSTALLATION MUST COMPLY WITH ALL CURRENT NATIONAL AND LOCAL ELECTRICAL CODES.
LOW VOLTAGE CONNECTION
A HARDWIRE CONNECTION
Join the black wire from the LED tape (1) (-) with the black output wire from the low voltage power supply (2).
Join the white or red LED tape wire (+) to the white or red power supply output wire.
Use appropriate twist-on (or equivalent) connectors to isolate wires.
B PLUG-IN CONNECTION WITH DC PLUG
Connect input connector of the LED tape (1) to the output connector of the low voltage power supply (2).
LINE VOLTAGE CONNECTION
Pass the main power feed (not included) and power supply input cable (3) into junction box (not included).
Connect the white (N, Neutral) cables from the power feed and from the power supply.
Connect the black (L, Live) cables from the power feed and from the power supply.
Connect the copper, green or yellow (G, ground) wires from the power supply, power feed, and the junction
box. Use appropriate twist-on connectors (not included).
Install the junction box cover (not included)
WIRING DIAGRAMS
LOW VOLTAGE CONNECTION (LED TO POWER SUPPLY)
Non-dim. / ELV / TRIAC
0-10 V
TUNABLE WHITE CONTROLLER
GRE ALPHA CONTR. (BLANC AJUSTABLE / TUNABLE WHITE)
RGB(W) CONTROLLER
DMX
SINGLE COLOR (2 PINS)
TUNABLE WHITE (3 PINS)
RGB (4 BROCHES) / RGB (4 PINS)
LINE VOLTAGE CONNECTION (POWER SUPPLY TO AC MAINS)
Non-dim. / 0-10V / DMX / RGB contr. / GRE Alpha
TRIAC
ALIMENTATION AC AC POWER FEED
ELV
ALIMENTATION AC AC POWER FEED
WARNING:
Use only Class 2 rated components.
9221, Rue H1J 1T4 Lumen Truss reserves the rights to make changes to this document at any time without prior
notice
www.lumentruss.com / 1 855 384 3384 / 1 514 903 5863 / 9221, Rue Edison,
Lumen Truss reserves the rights to make changes to this document at any time without prior notice.
Documents / Resources
LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex [pdf] Instruction Manual
S RIE NEON SLEEVE SERIES Top View Flex, NEON SLEEVE SERIES Top View Flex, SLEEV
E SERIES Top View Flex, SERIES Top View Flex, Top View Flex, View Flex, Flex
References
Commercial Led Lighting, Linear Led Lights – LumenTruss
Manuals+,
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex User manual

SÉRIE NEON SLEEVE SERIES Top View Flex
Brand
LUMENTRUSS
Model
SÉRIE NEON SLEEVE SERIES Top View Flex
Type
User manual

LUMENTRUSS SÉRIE NEON SLEEVE SERIES Top View Flex offers versatile lighting solutions with its flexible design and variable installation options. It allows for curved or straight installations with a minimum inner bend radius of 150mm (6in) and can be used for up/down bends, ensuring adaptability to various spaces and requirements. With the included mounting brackets and screws, installation is made simple and secure.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents