Johnson Controls IQBASE-GRY Installation guide

IQ BASE QUICK INSTALL GUIDE

Do not use for UL2610 or EN Grade 2 or equivalent installations

Document#: IQBASE-QG-02-22

Qolsys Product #: IQBASE-GRY

IQBASE-BLK

GOT QUESTIONS?

1. With a small phillips

screwdriver, undo the locking

screw from the back of the

panel, remove the SmartMount

backplate and discard.

1. Locate the IQ Base with

SmartMount and connect the

power cable from the IQ Base

into the BLACK connector

inside the IQ Panel 4.

Insert the top hooks into the

back of the panel, then swing

down and press into place.

1. With a small phillips

screwdriver, screw in the

locking screw from the

bottom of the panel to

secure it to the IQ Base.

1. With the included power

supply and cable, plug the

barrel connector into the

barrel jack on the bottom of

the IQ Base as shown above.

Be sure the barrel is pushed

all the way in.