Step 1:

Lead the end of the pole mounting

Laptop

4G Base station

PoE+ Data

Data

24V PoE Adapter

Package content Hardware Overview Mounting Web configuration

Launch your web browser then enter http://192.168.1.1 in the address

Product Model No.

Purchase Time

Serial No.

Dealer Signature

5) In the relevant device options, you can see the bound device information.

4G LTE Outdoor CPE

Combine the two parts of the dish reflector. Hold the reflector assembly by heand (do not usea tabletop

or flat surface) and insert the Feed Re-ceiver into the

reflector, secure it wiith two screw.

Do not install the Feed Receiver into the reflector assembly by pushing down onto a tabletop orother flat surface

as this can deform the panels. Hold the reflector assembly by hand.

Pull out the port cover and connect an Ethernetcable to

the port, then push back the cover.

Open the Metal Strap and feed it through thetwo slots

ofthe Ball Joint Mount, then wrap theMetal Strap

around the pole.

Loosen the lock nut on the Ball Joint Mount,and aim at

the other end of the wireless link.After that lock

the nut.

Configuration complete.

Cloud Management Setting(Optional)