PylePro PP555 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the PylePro PP555 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.PyleUSA.com
PP555
Ultra Compact Phono Turntable
Pre-Amplifier w/ 9V Battery Compartment
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: suppor[email protected]om
This product can expose you to a chemical or group of checmicals, which
may include ”Nickel Carbonate which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
The pyle PP555 mini phono preamp was manufactured to enable you to connect your record players (L)
& (R) RCA OUT to the AUX, CD, DVD, Mp3 LINE IN on most Stereo ampliers.
Installation:
1. You can power your PP555 by installing a 9V battery in the bottom battery compartment or
by plugging the 12-Volt DC Adaptor into the DC jack located under the grounding post.
Note: Please be sure to adjust Power selector switch accordingly depending on which
power source you are using.
2. When connecting your record player to the pre-amp please be sure to connect the ground
cable. Most all record players have a double RCA (L) & (R) combined with a ground wire.
Failure to connect ground wire properly may result in humming noise.
3. You can choose to connect your amplier's LINE IN to either the (L) & (R) RCA OUTPUT or the
1/4 " Stereo Jack.
Features:
Converts phono signals to line level signals
Connects to turntable output bringing phono level up to line level
State-of-the-art circuitry to accommodate magnetic pickups
Ultra-low noise audio operation improves sound performance
Universal compatibility: for turntables & other studio equipment
RCA (L/R) Input & Output Connector Jacks
1/4'' Output Connector Jack
*or battery operated via 9-Volt battery
What's in the Box:
Turntable Pre-Amp Power Adapter
Technical Specs:
S/N Ratio: 70dB
THD: 0.08% @ 1kHz and 3mV
Output: 2V max (P-P) at 10K Ohms
Frequency Response: 20Hz to 20kHz @ 2dB
Input Sensitivity: 3mV at 50K Ohms (Phono)
Load Impedance: 10K Ohms - Reference Voltage: 1V d
Battery Operated, Requires (1) x '9V' Battery, Not Included
Dimensions (W x H x D): 3.54'' x 2.13'' X 1.02'' -inches
/