Edge FM Transmitter Quick start guide

Brand: Edge

Model: FM Transmitter

Type: Quick start guide

This Product is backed by a one year Limited Warranty.

For complete warranty information visit www.edgetechcorp.com/register

For a detailed instruction manual go to www.edgetechcorp.com/support/manuals

NEED

HELP?

TECH SUPPORT

www.edgetechcorp.com/support

4051 Ver2(09-04)

DiskGO!

FM Transmitter

for iPod & Other Players

Quick Start Guide

327 East 14th Street / Ada OK 74820 (800) 332-6581 / (580) 332-6581 / www.edgetechcorp.com

EDGE

and DiskGO!

are trademarks of EDGE Tech Corp. Trademarked words or logos used herein are property of their respective owners.

IMPORTANT

PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING OR USING THIS PRODUCT IF YOU ARE NOT

FAMILIAR WITH DOING SO. ANY INSTRUCTIONS INCLUDED WITH THE PRODUCT ARE FOR CONVENIENCE ONLY AND ARE NOT

INTENDED TO BE ALL-INCLUSIVE.

Thank you for purchasing the DiskGO! FM Transmitter!

The FM Transmitter is a hand-held device which can transform

audio signals, such as audio output of portable devices, into

FM signals that you can receive via any FM radio. There are

three frequencies to choose from to avoid dominant stations in

your area. It’s the perfect device for users to play digital

music files through their car or home stereo.

REQUIREMENTS:

Audio Player/System equipped with audio output

(2) AAA batteries or AC/DC Adapter (output: 4.2~5V, 20mA, not included)

FEATURES

1. 3 band selection (87.7MHz, 88.1MHz, 88.5MHz) for better audio quality.

2. No wiring necessary.

3. Battery operated or externally powered through DC jack (not included).

4. High sensitivity and low power consumption.

5. Power on/status LED indicator.

6. Conforms to international standards (CE, FCC).

INSTRUCTIONS:

1. Load 2 AAA batteries (included), ensuring that they are correctly oriented. Install the inner battery

with the negative side pointing out. Install the outer battery with the positive side pointed out. The

negative post should always connect to the spring on the battery chamber door.

2. Connect the audio cable to the audio output (headphone jack) of source device.

3. Turn on the FM transmitter and source device. Then choose the frequency on the FM switch of the FM

Transmitter (Choose from the following frequencies: 88.5, 88.7, 88.9).

4. Tune in your own FM receiver to the corresponding frequency to hear the broadcast.

5. Be sure to turn off the FM transmitter after use, to conserve battery life.

Edge FM Transmitter Quick start guide

Edge FM Transmitter Quick start guide

Edge FM Transmitter Quick start guide

Related papers

Other documents