Atdec AC-AP-2020 Installation guide

Atdec
Brand
Atdec
Model
AC-AP-2020
Type
Installation guide
A
Plate
(x1)
B
CSK
Screw
M5x10mm
(x4)
C
Nylock
Nut
M5
(x4)
D
Screw
M6x14mm
(x4)
E
Screw
M8x20mm
(x4)
F
Screw
M4x12mm
(x4)
G
Screw
M4x10mm
(x4)
H
Nut
M4
(x4)
I
Washer
M5
(x4)
J
Spacer
M8 x 5mm
(x8)
K
Washer
M8
(x4)
AC-AP-2020 Page 1 of 2
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Flush Configuration - Recommended for greater than 12kg (26.45lbs)
! Spacer Configuration - Suitable for all loads unable to be flush mounted
! This product reduces the working capacity of the monitor arm by 1kg.
! Maximum load for plate only is 30kg (66lbs)
! The manufacturer accepts no responsibility for incorrect installation.
COMPONENTS CHECKLIST REQUIRED TOOLS
Max - 30kg (66lbs)
• Phillips Head Screw Driver
• Spanners
200 x 200 VESA Adaptor Plate
Installation Guide
AC-AP-2020
AC-AP-2020 Page 2 of 2
No portion of this document or any artwork contained herein should be reproduced in any way
without the express written consent of Atdec Pty Ltd. Due to continuing product development,
the manufacturer reserves the right to alter specifications without notice. © 20171016A
atdec.com | atdec.co.uk | atdec.com.au
1. Flush mounting configuration - Recommended for loads greater than 12kg (26.45lbs)
2. Spacer configuration - Suitable for loads up to the maximum which are unable to be flush mounted
Monitor
Adaptor
Plate
VESA
Monitor
Adaptor
Plate
VESA
Display
VESA
Display
Adaptor
Plate
Adaptor
Plate
VESA
1.1 Fasten adaptor plate to VESA head 1.2 Mount adaptor plate to monitor 1.3 Check fitment
2.1 Fasten adaptor plate to VESA head 2.2 Mount adaptor plate to monitor 2.3 Check fitment
  • Page 1 1
  • Page 2 2

Atdec AC-AP-2020 Installation guide

Atdec
Brand
Atdec
Model
AC-AP-2020
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents