2. Metrologic
  3. MS 1690 Focus Series
MS 1690 Focus Series

Metrologic MS 1690 Focus Series Stand Installation Manual

  • Hello! I am an AI chatbot trained to assist you with the Metrologic MS 1690 Focus Series Stand Installation Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
00 - 02001C
MS1690 FOCUS
™
STAND INSTALLATION GUIDE
January 2006
Printed in the USA
Stand Components, MLPN 46-00147
a. Stand Base................................ Qty. 1
b. Flexible Shaft ............................ Qty. 1
c. Flexible Shaft Cover .................. Qty. 1
d. Scanner Cradle ......................... Qty. 1
e. 1¼" – 20 x ⅜" Flat Head ........... Qty. 2
Phillips, 82° Undercut
f. #8 Round Head Wood Screw.... Qty. 2
Hard Mounting the Stand (Optional)
Metrologic provides two #8 wood screws for securing the stand base to the
counter top. The following figure provides the pilot hole dimensions for securing
the stand base.
Figure 2. Stand Base Hole Pattern (Not to Scale)
Figure 1. Stand Components
- 1 -
STAND INSTALLATION GUIDE
Assembling the Stand
Figure 3. Assembling the Stand
- 2 -
/