Orbit OEB3001 Owner's manual

Brand: Orbit

Model: OEB3001

Type: Owner's manual

Orbit OEB3001 is a versatile fitness machine that combines the benefits of a recumbent bike and an elliptical trainer, providing a low-impact, full-body workout. With its adjustable resistance levels, you can customize your workout to suit your fitness goals, whether you're a beginner or an experienced athlete. The OEB3001 features an easy-to-read LCD display that tracks your progress, including speed, distance, time, and calories burned. It also includes heart rate sensors to help you monitor your intensity.

01 Assembly

Your bike will require a small amount of assembly.

You will find everything you need included in the box.

02 Get to know your bike

Take time to get to know your new bike – it will help you

03 Replacement parts

Thank you for purchasing our product. Although we go to great to ensure the quality of our products.

Occasionally errors or missions occur. Should you find either a defective or missing part in this product. Please

Telephone no.: 08-94444055

E-mail: warehouse@orbitfitness.com.au

01 Assembly

PRECAUTIONS

WARNING: This bicycle has been designed and constructed to provide maximum safety. Nevertheless, certain

precautions should be taken when using exercise equipment. Read the whole manual before assembling and using

the bicycle. The following safety precautions should also be observed:

1. Before using the exercise bike, please read all instructions in this manual.

2. It is the responsibility of the owner to ensure that all users of the bike are adequately informed

of all precautions. Use the exercise bike only as described in this manual.

3. Use the bike indoors on a level surface and keep it away from moisture and dust. Place a mat

under the stabilizers to protect the carpet or floor.

4. Inspect and tighten all parts regularly. Replace any worm parts immediately

5. Keep children away from this equipment at all times. DO NOT leave them unsupervised in the room where this

bicycle is kept.

6. Wear appropriate exercise clothing when using the bike. Do not wear loose clothing that could

become caught in the bike.

7. If you feel pain or dizziness while exercising, stop immediately and cool down.

8. The pulse sensor is not a medical device. Various factors including the user’s movement, may

affect the accuracy of the heart rate readings. The Pulse sensor is intended only as an exercise

aid in determining heart rate rends in general.

9. The bike is intended for commercial use.

Pre-assembly notes

OPEN THE BOXES

Make sure all parts on the manual are included in the carton. Check The Hardware Chart

for a full count of the number of parts included for proper assembly.

GATHER YOUR TOOLS

Before starting the assembly of your unit, gather the necessary tools. Having all of the equipment at hand

will save time and make the assembly quick and hassle-free.

CLEAR YOUR WORK AREA

Make sure that you have cleared away a large enough space to properly

assemble the unit. Make sure the space is free from anything that may cause

injury during assembly. After the unit is fully assembled, make sure there is a

comfortable amount of free area around the unit for unobstructed operation.

Hardware chart

W re nc h-13 /1 5m m ( 1 )

A lle n K e y-6 m m (1 )

S cre w d rive r (1 )

A lle n B o lt M 8 xP 1 .25x1 6 L (4)

S c re w M 3 *30 L (3 )

S prin g W as he r

*2T (2)

F la t W a s h e r 8* 1 9 *2 T (4)

A lle n B o lt M 7 *P 1 .0 *30 L (2 )

S C R E W S M 5 *P 0 .8 *1 0 L(1 1 )

Wrenc h-13 /15 m m(1 )

Allen K e y- 6 m m (1)

Scre w driver (1)

Allen Bo l t M 8 xP 1.25x1 6L (4)

Sc re w M 3*3 0 L ( 3 )

Spring Wa sher

*2T(2)

Flat W a she r 8* 19*2 T (4 )

All e n Bo lt M7 * P 1 .0* 3 0 L ( 2)

SC REW S M 5 * P 0 .8* 10L (11 )

01 Assembly

Part list

NO DESCRIPTION QTY

BOM NUMBRE

COMPUTER

1 PCS PE-SG76810027102

A-1

ADJUSTABLE COMPUTER BRACKET

1 PCS PH-T-PB-326-1000

A-2

SCREW M5x10L

12 PCS PD-SWM60510-1042

H SHAPE HANDLEBAR

1 PCS PH-T-PB-425-1000

B-1

HAND PULSE WIRE WITH BODY FAT

2 PCS PE-B23-0750-1002

B-2

HAND PULSE SENSOR FOR BODY FAT(UPPER)

2 PCS PL-T-PB-445-1080

B-3

HAND PULSE SENSOR (LOWER)

2 PCS PL-T-PB-447-1080

B-4

HAND PULSE HOLDER

4 PCS PH-T-PB-242C1000

B-5

SCREW M3xP0.5x12L

4 PCS PD-SGM20312-1041

HANDLEBAR POST

1 PCS MTEB3000FW027005

C-1

LEFT PROTECT COVER

1 PCS PLEB1000-10-1080

C-2

RIGHT PROTECT COVER

1 PCS PLEB1000-11-1080

C-3

UPPER PROTECT COVER

1 PCS PLEB1000-12-1080

C-4

SEMI CIRCLE WASHER φ8xφ19x2t

2 PCS PD-WA220819-1082

C-5

FLAT WASHER φ8xφ19x2t

4 PCS PD-WN230819-1082

C-6

HEXANGULAR SCREW M8*P1.25*16L

6 PCS PD-SRM30816-1182

C-7

HAND PULSE WIRE (UPPER)

1 PCS PE-C31-0600-1000

C-8

UPPER COMPUTER CABLE

1 PCS PE-C27-0550-1000

FRAME

PCS MTEB3000FW117005

D-1

BEARING

PCS PH-BA2-6004-1005

D-2

END CAP FOR STABILIZER

PCS PLEB1000-04-1080

D-3

HEXANGULAR NUT M16*P1.5

PCS PD-NHI61600-1042

D-4

ADJUSTOR FOR STABILIZER

PCS PLEB1000-08-1002

D-5

CONTROL BOARD

PCS 1PB-LGPS-7.1V-A01

D-6

HEXANGULAR SCREW M8xP1.25x25L

PCS PD-SRM30820-1182

D-7L

FRONT COVER LEFT

PCS PLEB3000-01-10D0

D-7R

FRONT COVER RIGHT

PCS PLEB3000-02-10D0

D-8

COVER FOR CRANK

PCS PLEB1000-07-1185

D-9L

LEFT CRANK ARM WITH COVER

PCS PH-T-PB-279-1000

D-9R

RIGHT CRANK ARM WITH COVER

PCS PH-T-PB-280-1000

D-10

PEDAL(L/R)

SET PS-T-PB-433-1080

D-11L

REAR COVER LEFT

PCS PLEB3000-04-10D0

D-11R

REAR COVER RIGHT

PCS PLEB3000-03-10D0

D-12

DECORTION COVER FOR MAINHOUSING

PCS PLEB2000-03-1080

D-13

COVER FOR BASE TUBE

PCS PLEB3000-09-1080

D-14

CROSS SCREW M4x50L

PCS PD-SBM20450-1041

D-15

CONE CROSS SCREW M5xP0.8x14L

PCS PD-SWM20514-1141

D-16

SLIDER POST FOR SADDLE

PCS MH-T-PB-253-2000

D-17

COMPUTER CABLE LOWER

PCS PE-C26-0950-1000

D-18

HAND PULSE WIRE LOWER

PCS PE-C31-2900-1000

D-19

SEMI CIRCLE WASHER φ8xφ19x2t

PCS PD-WA220819-1082

D-20

NYLON NUT M8*8t

PCS PD-NNM60801-1042

D-21

NYLON SCREW M8xP1.0x20L

PCS PD-SEM10820-7601

Part list

NO DESCRIPTION QTY

BOM NUMBRE

D-22 SENSOR BOX 1 PCS PE-P-PB3715-1000

D-23 SENSOR HOLDER 1 PCS PE-P-PB4310-1000

D-24 SCREW 3 PCS PD-SDM20410-1041

D-25 CLAMP 1 PCS PH-T-PB-274C1000

D-26 UPPER COVER FOR BATTERY 1 PCS PL-P-PB4201-10R1

D-27 BATTERY 1 PCS PE-T-PB-453C1000

D-28 LOWER COVER FOR BATTERY 1 PCS PL-P-PB4200-10R1

HOLDER FOR SLIDER POST

PCS PH-T-PB-243-1000

E-1

BACK REST

PCS PS-T-PB-272-1002

E-2

SEAT

PCS PS-T-PB-416-1002

E-3

SEAT SUPPORT FRAME

PCS MTEB3000FW057005

E-4

MAGAZINE RACK

PCS PL-SUF755R251102

E-5

SEAT HANDLEBAR

PCS MTEB3000FW067005

E-6

FORM GRIP

PCS PL-T-PB-358-1002

E-7

COVER FOR SEAT HANDLBAR

PCS PLEB3000-20-1080

E-8

HAND PULSE HOLDER

PCS PE-P-PB3428-1000

E-9

CONNECTION BOARD

PCS PE-T-PB-338-1000

E-10

RIGHT COVER FOR SLIDER POST

PCS PLEB3000-05-1080

E-11

SPRING SOCKET FOR ADJUSTMENT

PCS PH-T-PB-246-1000

E-12

TENSION CABLE

PCS PH-T-PB-264-1000

E-13

FLAT WASHER φ6xφ13x1t

PCS PD-WN120613-1041

E-14

CLAMP

PCS PH-T-PB-247-1000

E-15

ROUND HEXANGULAR SCREW M6*55L

PCS PD-SOM30655-1082

E-16

KNOB FOR SEAT ADJUSTMENT

PCS PLEB3000-14-1000

E-17

TURNER

PCS PLEB3000-16-1000

E-18

NYLON NUT M8*8t

PCS PD-NNM20801-1041

E-19

PULLING POLE

PCS PH-T-PB-285-1000

E-20

FIXING DECK

PCS PLEB3000-15-1080

E-21

HANDLE FOR SLIDER

PCS PLEB3000-11-1000

E-22

BUSHING ф6*10L

PCS PH-T-PB-327-1000

E-23

HEXANGULAR SCREW M6*P1.0x55L

PCS PD-SPM20655-1041

E-24

HANDLE DECK FOR SLIDER

PCS PLEB3000-10-1080

E-25

FIXING CHIP FOR HANDLE

PCS PLEB3000-13-1080

E-26

SCREW M8*P1.25*16L

PCS PD-SRM30816-1182

E-27

SCREW M10x20L

PCS PH-P-PB1913-1082

E-28

FLAT WASHER φ8xφ19x2t

PCS PD-WN230819-1082

E-29

IDLER WHEEL FOR SLIDER

PCS PL-T-PB-278-1000

E-30

HEXANGULAR SCREW

PCS PD-SHI31235-1082

E-31

BUSHING

PCS PH-P-PA-009-1000

E-32

FLAT WAHSERφ10.5xφ17x2t

PCS PD-WN211017-1041

E-33

NYLON NUT

PCS PD-NNI21200-1041

E-34

LEFT COVER FOR SLIDER

PCS PLEB3000-06-1080

Part list

NO DESCRIPTION QTY

BOM NUMBRE

E-35

SEAT HAND PULSE WIRE WITHOUT BODY FAT

PCS PE-B11-0750-1002

E-36

SEAT COVER LEFT

PCS PLEB3000-18-1080

E-37

SEAT COVER RIGHT

PCS PLEB3000-19-1080

E-38

HAND PULSE SENSOR (UPPER)

PCS PL-T-PB-446-1080

E-39

HAND PULSE SENSOR (BELLOW)

PCS PL-T-PB-447-1080

E-40

SCREW M3xP0.5x12L

PCS PD-SGM20312-1041

E-41

CAP

PCS PL-P-PB1711-1002

E-42

CARRIER

PCS PLEB3000-17-1080

E-43

CROSS SCREW M5xP0.8x14L

PCS PD-SWM30514-1082

E-44

SEAT IDLER WHEEL

4 PCS PL-P-PB2547-1000

E-45

HEXANGULAR SCREW

4 PCS PD-SHI61235-1042

E-46

BUSHING

4 PCS PH-P-PA-009-1000

E-47

FLAT WASHER φ10.5xφ17x2t

8 PCS PD-WN261017-1042

E-48

NYLON NUT

6 PCS PD-NNI61200-1042

E-49

ROUND HEXANGULAR SCREW M8*P1.25*18L

1 PCS PD-SOM60818-1042

PULLEY

PCS PH-PJ6A2601-1100

F-1

BELT

PCS PH-LJ6M1054C1000

F-2

AXLE SET

PCS PR-P-PW4758C1000

F-3

HEXANGULAR SCREW M8xP1.25x12L

PCS PD-SHM20812-1102

SHAFT FOR IDLER WHEEL

PCS MTEB3110FW037300

G-1

NUT

PCS PD-SHM20612-1041

G-2

IDLER WHEEL

PCS PH-P-PB5044-1000

G-3

FLAT WASHER φ8.5xφ25x2t

PCS PD-WN210825-1141

G-4

NUT

PCS PD-SHM10820-1241

G-5

FLAT WASHER φ6xφ13x1t

PCS PD-WN110613-1041

G-6

NUT

PCS PD-NNM20800-1041

MAGNETIC SET

PCS AA-A-PA2801-9114

LGPS FLYWHEEL

PCS PH-FAX25039-1000

I-1

NUT

PCS PD-NNI21224-1041

I-2

COIL FOR GENERATOR

PCS PH-P-PB5127-1000

I-3

AXLE

PCS PH-P-PB4968-1000

I-4

BEARING 6000RS

PCS PH-BA2-6000-1000

I-5

ONE WAY BEARING

PCS PH-P-PB3485-1000

I-6

BEARING 6003RS

PCS PH-BA2-6003-1000

I-7

BEARING 6203RS

PCS PH-BA2-6203-1100

I-8

BEARING 6202RS

PCS PH-BA2-6202-1000

I-9

PULLEY

PCS PH-P-PB3764-1000

I-10

FLAT WASHER φ30xφ34x1t

PCS PD-WN113034-1002

I-11

STAR WASHER

PCS PD-WO121017-1041

I-12

FLAT WASHER φ10xφ14x1t

PCS PD-WN121014-1041

I-13

FLAT WASHER φ10xφ14x0.5t

PCS PD-WN121014-1141

ROUND HEXANGULAR SCREW M7xP1.0x30L

PCS PD-SOM40730C1002

Part list

NO DESCRIPTION QTY

BOM NUMBRE

K-1

SPRING WASHER Φ7X2t

2 PCS PD-WS410700C1002

K-2

CROSS SCREW M3x30L

3 PCS PD-SGM40330C1002

K-3

CONE CROSS SCREW M5x10L

11 PCS PD-SWM40510C1002

K-4

HEXANGULAR CONE CROSS SCREW M8*P1.25*16L

PCS PD-SRM60816C1042

K-5

FLAT WASHER φ8xφ19x2t

PCS PD-WN260819C1042

drawing for assembly

Exploration drawing

STEP 1

STEP 1 STEP 1

STEP 1 –

––

–

Install Pedals

Insert the Right Pedal (D-10R) into the right arm of the Crank

assembly and finger tighten in a clockwise direction until the

thread is fully inserted in the crank.

Repeat for the Left Pedal (D-10L) and finger tighten in an

anticlockwise direction. Tighten both with the wrench.

STEP 2

STEP 2 STEP 2

STEP 2 –

––

–

Install Handlebar Post

Take off screws and washers(C-4/C-5/C-6) from handlebar post.

Connect upper hand pulse wire (C-7) with lower hand pulse wire

(D-18), upper computer cable (C-8) with lower computer cable (D-17).

Then attach handlebar post (C) with main frame by screws,

flat washers and wave washers .

STEP 3

STEP 3 STEP 3

STEP 3 –

––

–

Install Handlebar

Insert two hand pulse wire with body fat (B-1) into handlebar post hole(L&R), then pull them out from handlebar post.

Fixing handlebar (B) onto handlebar post by screws (K) and spring washers (K-1).

STEP 1

STEP 4 - Insert Computer

Take off computer back cover and four screws (A-2) from adjustable computer bracket (A-1). Then fix the computer plate( A-1) by screw.

Through four computer cables out of computer back cover. Connect four cables with computer, and then secure computer back cover

with screw ( A-2). Please see the detailed assembly as below :

Step 5 – Install Protect Cover

Attach left and right protect cover (C-1/C-2) to handlebar post by three screws (K-2) and two screws (K-3). Assemly upper protect cover

(C-3) to handlebar post by cross screw (K-3)

Step 6 – Install Seat and Carrier

Take off hexangular screw (E-49) from holder for slider post (E). Keep seat support frame (E-3) erect and secure it with screw(E-49).

Apart screw (E-43) from handlebar (E-5) . Fixing carrier (E-42) on the handlebar with screw (E-43). Take off four hexangular screws (E-26)

and four cross screws (E-43) from back rest. Secure back rest with four hexangular screws (E-26) , then attach magazine rack( E-4) to

back rest with four cross screws (E-43).

Step 7 – Install Seat Cover

Through two cables (E-35) out of handlebar cover (E-7). Secure handlebar cover onto handlebar with screws (K-3). Attach left and right

seat cover (E-36/E-37) to handlebar.

Step 8 – Insert Cables

Insert the cable in the back of seat.

Step 9 – Seat Adjustment

You can move seat(E-2) forward and backward by handle for slider(E-21). Also, you can adjust the angle of back rest (E-1) by knob (E-16).

Well done !

Your bike is now ready for use. Please go to the computer operation section in this manual for

instructions on how to operate your console.

INSTRUCTION MANUAL OF SG7681-71

BUTTON FUNCTIONS

UP To make upward adjustment to each function data or increase training

resistance.

DOWN To make downward adjustment to each function data or decrease training

resistance.

MODE To confirm all setting.

START/STOP To start or stop workout.

RESET To reset current setting and have the monitor switch to initial training mode

for selection.

RECOVERY To test heart rate recovery status.

BODY FAT To test body fat %

Press the BODY FAT button in standby mode and modify user data.

DISPLAY FUNCTIONS

TIME Count up -

No preset target, Time will count up from 00:00 to maximum 99:59

with each increment is 1 minute.

Count down -

If training with preset Time, Time will count down from preset to

00:00. Each preset increment or decrement is 1 minute between 01:00 to

99:00.

SPEED Displays current training speed. Maximum speed is 99.9 KM/H or ML/H.

RPM Displays the Rotation Per Minute. Display range 0~15~999

DISTANCE

Accumulates total distance from 00:00 up to 99.99 KM or ML. The user may

preset target distance data by pressing UP/DOWN button. Each

incensement is 0.1KM or ML.

CALORIES Accumulates calories consumption during training from 0 to maximum 9999

calories.

(This data is a rough guide for comparison of different exercise sessions which

can not be used in medical treatment.)

PULSE User may set up target pulse from 0 -

30 to 230 and computer buzzer will beep

when actual heart rate is over the target value during workout.

WATT Display current workout watts. Display range 0~999.

OPERATING PROCEDURE

(1) When power’s on, LCD will have 2 seconds of all segments displaying on screen with a beep. Follow by the

wheel diameter, body fat spec and UNIT displaying on LCD for 1 second, system will then enter into the

setting mode.

(2) Users may use ▲ or ▼ key to select one user profile from U1~U4. SEX, AGE, HEIGHT and WEIGHT are

requried to be set. System will enter into the standby mode when all values are done setting.

(3) Use ▲ or ▼key to select MANUAL→ PROGRAM→H.R.C.→WATT→USER PROGRAM→MANUAL in

circulation order. Press the MODE key when selection is determined.

(4) MANUAL –

4-1 Use ▲ or ▼ key to adjust the LEVEL; press the MODE key for confirmation. Manual value also can be

adjusted under the START mode; LEVEL text and number will be displaying on LCD. LCD will switch to

display the WATT value if no adjustment is accrued after 3 seconds.

4-2 Use ▲ or ▼ key to preset values for TIME, DISTANCE, CALORIES and PULSE. Press the MODE key for

confirmation.

4-3 Press the START key to start exercising. RPM BAR and PULSE BAR will change values accordingly. Press

the STOP key to pause exercise (with all values remaining on screen). Press the PRSET key to return to

PROGRAM SELECT.

(5) PROGRAM –

5-1 Use ▲ or ▼ key to select P1~P12. LCD will display corresponding flashing garphic to the program user

selects.

5-2 When PROGRAM is selected, use ▲ or ▼ key to preset LEVEL. Press the MODE key after value’s

determined. Follow use ▲ or ▼ key to preset TIME; press the START key to start workout.

5-3 LEVEL can be adjusted during exercise. LEVEL text and number will be displaying on LCD. LCD will

switch to display the WATT value if no adjustment is accrued after 3 seconds.

(6) H.R.C. –

Use ▲ or ▼ key to select 55%, 75%, 90% or TARGET. The heart rate value will be calculated according to the

AGE user inputs and will be shown in the alphanumeric column in flashing text. Use ▲ or ▼ key to preset

TARGET value (30~230). Press the MODE key for confirmation. Use ▲ or ▼ key to preset TIME; press the

START key to start exercise.

(7) USER PROGRAM –

Users can use ▲ or ▼ key to set PROGRAM graphic. Press the MODE key for confirmation. Press the MODE

key for 2 seconds to stop setting. Use ▲ or ▼ key to set TIME; press the START key to start exercise.

(8) WATT –

WATT default value 120 will be displayed in the alphanumeric column in flashing text waiting for setting.

Users can use ▲ or ▼ key to adjust WATT value; press the MODE key for confirmation. User ▲ or ▼ key to

set TIME; press the START key to start exercise. WATT LEVEL will be adjusted automatically according to

user’s RPM input value. It can also be adjusted by using ▲ or ▼ during exercise.

(9) BODY FAT –

When it’s under the STOP mode; press the BODY FAT key to start body fat measurement. There’ll be a UX

displaying on LCD for 2 seconds; system will then enter into the measurement processing and start executing

when there’s a heart rate value detected. FAT%, BMI and a result symbol will show on LCD after 8 seconds.

Press the BODY FAT key for 2 seconds (under the STOP mode) to enter into personal profile setting (AGE,

HEIGHT, WEIGHT); press the MODE key to confirm and start the measurement. Alphanumeric column will

display E-1 if there’s no heart rate input detected during testing. An E-4 will be shown in the alphanumeric

column if the test result is exceeded in FAT 5~50 and BMI 5~50.

(10) RECOVERY –

When there’s a heart rate input (under both START and STOP mode); press the RECOVERY key to execute

this function. TIME “0:60” will start to count down and the alphanumeric column will display "FX"(X=1~6)

when TIME reaches zero. Press the RECOVERY key to return to the pervious awaiting mode. The actual heart

rate value will be shown on LCD continually after the test is finished.

NOTE

1. Stop pedaling for 90 seconds, computer will turn off.

2. Start pedaling and input 15RPM or above, computer will wake up.

3. Within 90 seconds, user may press RECOVERY button to test hear rate recover status.

4. This model has a USB port as a charger.

Orbit OEB3001 Owner's manual

Orbit OEB3001 Owner's manual

Orbit OEB3001 Owner's manual

Related papers

Other documents