Fujitsu plasmavision User manual

Brand: Fujitsu

Model: plasmavision

Category: Plasma TVs

Type: User manual

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

Before Use

• CHECKING ACCESSORIES.................................................................................... E-2

• INSTALLATION ........................................................................................................ E-3

Usage

• PART NAMES AND FUNCTIONS............................................................................E-4

Others

• OPTIONS.................................................................................................................. E-9

• MAIN SUPPORTED SIGNALS............................................................................... E-10

• SPECIFICATION .................................................................................................... E-12

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display

correctly.

Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see

the separate "Safety Precautions" manual).

Keep this manual where the user can see it easily.

* Installation and removal require special expertise. Consult your product dealer for details.

* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and "color"

will be displayed for all other models.

The notation used in this users' manual is "color".

* All operation items of A model are the same as W model.

Please read the description part of "W model" for "A model" in User's manual (2/2).

* The residential warranty for "A model" is enclosed in accessories.

* The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication alphabet or

the management number.

* The illustration of external appearance is for 42" model.

Please acknowledge some differences in the actual product of other models.

Contents

Page

USER'S MANUAL

(Specification and Part Names)

WIDE PLASMA DISPLAY

P42VHA40W/P42HHA40W/P50XHA40W/P55XHA40W/

P63XHA40W

P42VHA40U/P42HHA40U/P50XHA40U/P55XHA40U/

P63XHA40U

P42VHA40A/P42HHA40A/P50XHA40A/P55XHA40A/

P63XHA40A

P42VHA40R/P63XHA40R

MHD01695_E.book 1 ページ２００５年２月１日　火曜日　午後７時７分

E-2

CHECKING ACCESSORIES

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, video input terminal, attach one of these ferrite cores to the cable near the terminal.

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

One power cable Two small

ferrite cores

One remote control

(for the U model)

Three user's manuals

Manual

One remote control

(for the W/A/R models)

Manual

Two big

ferrite cores

Two AA batteries One residential

warranty

(for the A model)

No.:ZCAT1518-0730

Mfr.:TDK

No.:SFT-72SN

Mfr.:TKK

Power Cable

RCA Video Cable

Ferrite Core

MHD01695_E.book 2 ページ２００５年２月１日　火曜日　午後７時７分

E-3

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

INSTALLATION

To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer

performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

* Never attempt to tilt the display sideways or backward.

* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

* To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.

Display Section

Front Side

Upper

Right

Lower

Left

3.5 (for 42”/50”)

5 (for 55”/63”)

Wall

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing

materials originally supplied with the display when repacking it.

Reference

See P. E-9 for more information on options.

(cm)

MHD01695_E.book 3 ページ２００５年２月１日　火曜日　午後７時７分

E-4

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT

 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red): Stand-by state

Lit (green): Power ON state

Flashing (red or green): Malfunction (Flashes differently

depending on the type of

malfunction.)

 Remote control signal receiver

Receives signals from the remote control.

 Input mode selector button [MODE]

 Input mode selector button [MODE]

Switches between picture input modes.

 VOL + button

 VOL - button

Adjusts the audio volume.

 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

 ON/OFF button

Turns the power "ON" and "OFF (standby state)".

 Ambient Sensor

Detects the brightness of external light.

Do not obstruct it.

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the

power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

(Right section)

MHD01695_E.book 4 ページ２００５年２月１日　火曜日　午後７時７分

E-5

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

 / I power switch

If this button is pressed when the power indicator lamp is off, the indicator lamp will light.

The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.

If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.

*Power is still supplied to parts of the display even if the indicator lamp is off.

 HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model

Connect this terminal to the HDMI output terminal for DVD, etc.

 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.

 RGB1 input terminal (RGB1 INPUT/DVI-D) for the W/U/A models

Connect this terminal to the PC’s display (digital RGB) output terminal.

*The connection cable No.88741-8000 made by molex Inc. is recommanded.

DISPLAY SECTION – BACK AND BOTTOM PART

Bottom

Back

Note

• The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.

MHD01695_E.book 5 ページ２００５年２月１日　火曜日　午後７時７分

E-6

PART NAMES AND FUNCTIONS (Continued)

 RGB2 input terminal (RGB2 INPUT/mD-sub) for the W/U/A models /

RGB1 input terminal (RGB1 INPUT/mD-sub) for the R model

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

 Component video input terminal (VIDEO3 INPUT)

 Component video input terminal (VIDEO4 INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

 Video input terminal (VIDEO1 INPUT)

Connect this terminal to the video output terminal of your VCR.

When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)

 S-Video input terminal (VIDEO2 INPUT)

Connect this terminal to the S-video output terminal of your VCR.

 Audio3 input terminal (AUDIO3 INPUT)

 Audio2 input terminal (AUDIO2 INPUT)

 Audio1 input terminal (AUDIO1 INPUT)

Connect this terminal to the audio output terminal of your VCR, etc. (See the User’s manual (2/2) for the selection of audio input for video

input.)

 External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker.

When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)

* See the speaker instruction manual for more information.

 Power input terminal

Connect this terminal to the power cable supplied with the display.

When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)

MHD01695_E.book 6 ページ２００５年２月１日　火曜日　午後７時７分

E-7

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

DESCRIPTION OF INPUT TERMINALS

DVI-D terminal (RGB1 INPUT/DVI-D)

for the W/U/A models

Pin No. Signal Pin No. Signal Pin No. Signal

1 T.M.D.S. Data2– 9 T.M.D.S. Data1– 17 T.M.D.S. Data0–

2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+

T.M.D.S. Data2

Shield

T.M.D.S. Data1

Shield

T.M.D.S. Data0

Shield

4— 12— 20—

5— 13— 21—

6 DDC Clock 14 +5V Power 22

T.M.D.S. Clock Shield

7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+

8 — 16 Hot Ploug Detect 24 T.M.D.S. Clock–

mD-sub input terminal

(RGB2 INPUT/mD-sub) for the W/U/A models

(RGB1 INPUT/mD-sub) for the R model

Pin No. Input signal Pin No. Input signal

1Red 9—

2 Green 10 Ground

3Blue 11—

4— 12—

5 Ground 13 Horizontal synchronization

6 Ground 14 Vertical synchronization

7 Ground 15 —

8 Ground Frame Ground

RS-232C terminal (RS-232C)

Pin No. Signal

1 DCD (Data Carrier Detect)

2 RD (Received Data)

3 TD (Transmit Data)

4 DTR (Data Terminal ready)

5 GND (Ground)

6 DSR (Data Set Ready)

7 RTS (Request To send)

8 CTS (Clear To Send)

9 RI (Ring Indication)

MHD01695_E.book 7 ページ２００５年２月１日　火曜日　午後７時７分

E-8

PART NAMES AND FUNCTIONS (Continued)

HDMI (High-Definition Multimedia Interface)

HDMI is a standard for home digital interfaces, which can transmit images as well as multichannel

audio signals and control signals through one cable.

HDMI input terminal (VIDEO5 INPUT/HDMI)

for the U model

Pin No. Input signal Pin No. Input signal

1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield

2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock–

3 T.M.D.S. Data2– 13 CEC

4 T.M.D.S. Data1+ 14 Reserve

5 T.M.D.S. Data1 Shield 15 DDC Clock

6 T.M.D.S. Data1– 16 DDC Data

7 T.M.D.S. Data0+ 17 Ground (for +5V)

8 T.M.D.S. Data0 Shield 18 +5V Power

9 T.M.D.S. Data0– 19 Hot Plug Detect

10 T.M.D.S. Clock+ Frame FG

MHD01695_E.book 8 ページ２００５年２月１日　火曜日　午後７時７分

E-9

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

OPTIONS

* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.

* The colors of options do not match the display colors perfectly.

* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer

before purchasing.

Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 (for 42” model/50” model)

P-WB6300 (for 55” model/63” model)

Ceiling unit 0° to 15° mounting angle P-CT4200 (for 42” model/50” model)

P-CT6300 (for 55” model/63” model)

Desktop Stand unit P-TT4202 (for 42” model/50” model/55”

model)

P-TT6300 (for 63” model)

Speaker

(1 set of 2 speakers)

P-SP1000 (for attaching to the display) for

42” model/50” model

P-SP5010 (for attaching to the display) for

55” model

P-SP6300 (for attaching to the display) for

63” model

P-SP4200 (for mounting on the speaker

stands) for 42” model

P-SP5010 (for mounting on the speaker

stands) for 50” model/55” model

Desktop Speaker Stand

(1 set of 2 speaker stands)

P-ST4200 (for P-SP4200)

P-ST5000 (for P-SP5010)

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

CAUTION

This display (P42VHA40/P42HHA40/P50XHA40) is for use only with Fujitsu General Limited's option (P-WB4201, P-CT4200, P-TT4202).

This display (P55XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT4202).

This display (P63XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT6300).

Using this display with other option can cause instability resulting in possible injury.

MHD01695_E.book 9 ページ２００５年２月１日　火曜日　午後７時７分

E-10

MAIN SUPPORTED SIGNALS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of

the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust

the parameters.

When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in

accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

※It doesn’t support the model with 42” display (displayed pixels 852 x 480 dots x lines).

* In the DVI-D mode, the input signal can be restricted partly.

Display (dots x lines)

Horizontal frequency (kHz)

Vertical frequency (Hz) Signal DVI-D

640 x 480 31.47 59.94 VGA

640 x 480 37.50 75.00 VGA 75 Hz

640 x 480 43.27 85.01 VGA 85 Hz

720 x 400 31.47 70.09 400 lines

800 x 600 37.88 60.32 SVGA 60 Hz

800 x 600 46.88 75.00 SVGA 75 Hz

800 x 600 53.67 85.06 SVGA 85 Hz

1024 x 768 48.36 60.00 XGA 60 Hz

1024 x 768 60.02 75.03 XGA 75 Hz

1024 x 768 68.68 84.99 XGA 85 Hz

1280 x 1024 63.98 60.02 SXGA 60 Hz

1280 x 1024 79.98 75.03 SXGA 75 Hz

848 x 480 31.02 60.00

852 x 480 31.72 59.97

1360 x 768 47.71 60.01

※

720 x 485 15.73 59.94 60 fields

720 x 575 15.63 50.00 50 fields

MHD01695_E.book 10 ページ２００５年２月１日　火曜日　午後７時７分

E-11

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:

Main corresponding signals (Comp.video mode) Main corresponding signals (Video, S-video mode)

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Signal HDMI

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Signal

15.73 59.94 SDTV 480i 15.73 59.94 NTSC

15.63 50.00 SDTV 576i 15.63 50.00 PAL

31.47 59.94 SDTV 480p 15.63 50.00 SECAM

31.25 50.00 SDTV 576p 15.63 59.52 PAL60

45.00 60.00 HDTV 720p 15.63 50.00 N-PAL

37.50 50.00 HDTV 720p 15.73 59.95 M-PAL

33.75 60.00 HDTV 1080i 15.73 59.94 4.43NTSC

28.13 50.00 HDTV 1080i

Note

• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

• With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this

event, match the input signals to another frequency rather than those listed above.

• You can check input signals through "Information" on the FEATURES Menu screen. (See User's Manual (2/2))

• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

MHD01695_E.book 11 ページ２００５年２月１日　火曜日　午後７時７分

E-12

SPECIFICATION

WIDE PLASMA DISPLAY

Regulation

• UL, CSA Safety: UL6500, C-UL

EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065

EMC: EN55022 1998, Class B

EN61000-3-2 1995

EN61000-3-3 1995

EN55024 1998

EN61000-4-2 1995

EN61000-4-3 1996

EN61000-4-4 1995

EN61000-4-5 1995

EN61000-4-6 1996

EN61000-4-8 1993

EN61000-4-11 1994

• AS Safety: IEC60065

EMC: AS/NZS 3548

Model P42VHA40W/A P42HHA40W/A P50XHA40W/A P55XHA40W/A P63XHA40W/A

Screen size

42" wide screen:

92.1 cm (W) x 51.8

cm (H)

(105.7 cm diagonal)

36.3 inch (W) x 20.4

inch (H)

(41.6 inch diagonal)

42" wide screen:

92.2 cm (W) x 52.2

cm (H)

(106.0 cm diagonal)

36.3 inch (W) x 20.6

inch (H)

(41.7 inch diagonal)

50" wide screen:

110.6 cm (W) x 62.2

cm (H)

(126.9 cm diagonal)

43.5 inch (W) x 24.5

inch (H)

(50 inch diagonal)

55" wide screen:

122.9 cm (W) x 69.1

cm (H)

(140.0 cm diagonal)

48.4 inch (W) x 27.2

inch (H)

(55.1 inch diagonal)

63" wide screen:

139.3 cm (W) x 78.3

cm (H)

(159.8 cm diagonal)

54.8 inch (W) x 30.8

inch (H)

(62.9 inch diagonal)

Aspect ratio 16:9 (wide)

Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V) 1366 (H) x 768 (V)

Weight 31.5 kg / 69 lbs 45 kg / 99 lbs 55 kg / 121 lbs 72 kg / 159 lbs

Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm

40.9 (W) x 25.2 (H) x 3.4 (D) inch

(does not include outer projections)

121.6 (W) x 72.6 (H)

x 10.0 (D) cm

47.9 (W) x 28.6 (H)

x 3.9 (D) inch

(does not include

outer projections)

138.0 (W) x 80.8 (H)

x 12.5 (D) cm

54.3 (W) x 31.8 (H)

x 4.9 (D) inch

(does not include

outer projections)

150.4 (W) x 89.4 (H)

x 12.3 (D) cm

59.2 (W) x 35.2 (H)

x 4.8 (D) inch

(does not include

outer projections)

Power supply 110-240 VAC 50/60 Hz

Current rating 3.2-1.35 A 4.2-1.8 A 4.4-1.9 A 5.8-2.3 A 6.8-2.6 A

External equipment terminals

Video input

terminals

VIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω

C: 0.286 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω

(Component video input) P

B/CB: 0.7 Vp-p/75 Ω

PR/CR: 0.7 Vp-p/75 Ω

PC input terminal RGB1 input DVI-D terminal (EIA/CEA-861B Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω

Synchronization signal:TTL level

Audio terminals 2 audio input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal RS-232C connector (D-sub 9-pin)

External speaker

output terminal

Max. output: 10 W + 10 W, 6 Ω

Operating

conditions

Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 80 %

Accessories

3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries, 1 residential

warranty (for the A model)

MHD01695_E.book 12 ページ２００５年２月１日　火曜日　午後７時７分

E-13

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

÷–Œƒ

WIDE PLASMA DISPLAY

Regulation

• UL, CSA Safety: UL6500, C-UL

EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065

EMC: EN55022 1998, Class B

EN61000-3-2 1995

EN61000-3-3 1995

EN55024 1998

EN61000-4-2 1995

EN61000-4-3 1996

EN61000-4-4 1995

EN61000-4-5 1995

EN61000-4-6 1996

EN61000-4-8 1993

EN61000-4-11 1994

• AS Safety: IEC60065

EMC: AS/NZS 3548

Model P42VHA40U P42HHA40U P50XHA40U P55XHA40U P63XHA40U

Screen size

42" wide screen:

92.1 cm (W) x 51.8

cm (H)

(105.7 cm diagonal)

36.3 inch (W) x 20.4

inch (H)

(41.6 inch diagonal)

42" wide screen:

92.2 cm (W) x 52.2

cm (H)

(106.0 cm diagonal)

36.3 inch (W) x 20.6

inch (H)

(41.7 inch diagonal)

50" wide screen:

110.6 cm (W) x 62.2

cm (H)

(126.9 cm diagonal)

43.5 inch (W) x 24.5

inch (H)

(50 inch diagonal)

55" wide screen:

122.9 cm (W) x 69.1

cm (H)

(140.0 cm diagonal)

48.4 inch (W) x 27.2

inch (H)

(55.1 inch diagonal)

63" wide screen:

139.3 cm (W) x 78.3

cm (H)

(159.8 cm diagonal)

54.8 inch (W) x 30.8

inch (H)

(62.9 inch diagonal)

Aspect ratio 16:9 (wide)

Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V) 1366 (H) x 768 (V)

Weight 31.5 kg / 69 lbs 45 kg / 99 lbs 55 kg / 121 lbs 72 kg / 159 lbs

Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm

40.9 (W) x 25.2 (H) x 3.4 (D) inch

(does not include outer projections)

121.6 (W) x 72.6 (H)

x 10.0 (D) cm

47.9 (W) x 28.6 (H)

x 3.9 (D) inch

(does not include

outer projections)

138.0 (W) x 80.8 (H)

x 12.5 (D) cm

54.3 (W) x 31.8 (H)

x 4.9 (D) inch

(does not include

outer projections)

150.4 (W) x 89.4 (H)

x 12.3 (D) cm

59.2 (W) x 35.2 (H)

x 4.8 (D) inch

(does not include

outer projections)

Power supply 110-240 VAC 50/60 Hz

Current rating 3.2-1.35 A 4.2-1.8 A 4.4-1.9 A 5.8-2.3 A 6.8-2.6 A

External equipment terminals

Video input

terminals

VIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω

C: 0.286 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω

(Component video input) P

B/CB: 0.7 Vp-p/75 Ω

PR/CR: 0.7 Vp-p/75 Ω

VIDEO5 INPUT HDMI terminal (HDMI type A connector)

PC input terminal RGB1 input DVI-D terminal (EIA/CEA-861B Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω

Synchronization signal:TTL level

Audio terminals 2 audio input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal RS-232C connector (D-sub 9-pin)

External speaker

output terminal

Max. output: 10 W + 10 W, 6 Ω

Operating

conditions

Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 80 %

Accessories

3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries

Note

• Specifications and external appearance may be change for the sake of improvement.

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least

1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while

working.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

MHD01695_E.book 13 ページ２００５年２月１日　火曜日　午後７時７分

E-14

SPECIFICATION (Continued)

WIDE PLASMA DISPLAY

Regulation

• CE Safety: EN60065

EMC: EN55022 1998, Class B

EN61000-3-2 1995

EN61000-3-3 1995

EN55024 1998

EN61000-4-2 1995

EN61000-4-3 1996

EN61000-4-4 1995

EN61000-4-5 1995

EN61000-4-6 1996

EN61000-4-8 1993

EN61000-4-11 1994

• AS Safety: IEC60065

EMC: AS/NZS 3548

Model P42VHA40R P63XHA40R

Screen size 42" wide screen:

92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)

36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

63" wide screen:

139.3 cm (W) x 78.3 cm (H)

(159.8 cm diagonal)

54.8 inch (W) x 30.8 inch (H)

(62.9 inch diagonal)

Aspect ratio 16:9 (wide)

Number of pixels 852 (H) x 480 (V) 1366 (H) x 768 (V)

Weight 31.5 kg / 69 lbs 72 kg / 159 lbs

Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm

40.9 (W) x 25.2 (H) x 3.4 (D) inch

(does not include outer projections)

150.4 (W) x 89.4 (H) x 12.3 (D)

59.2 (W) x 35.2 (H) x 4.8 (D)

inch

(does not include outer projections)

Power supply 110-240 VAC 50/60 Hz

Current rating 4.2-1.7 A 6.8-2.6 A

External equipment terminals

Video input

terminals

VIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω

C: 0.286 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω

(Component video input) P

B/CB: 0.7 Vp-p/75 Ω

PR/CR: 0.7 Vp-p/75 Ω

PC input terminal RGB1 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω

Synchronization signal:TTL level

Audio terminals 2 audio input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal RS-232C connector (D-sub 9-pin)

External speaker

output terminal

Max. output: 10 W + 10 W, 6 Ω

Operating

conditions

Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 80 %

Accessories

3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries

Note

• Specifications and external appearance may be change for the sake of improvement.

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least

1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while

working.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

MHD01695_E.book 14 ページ２００５年２月１日　火曜日　午後７時７分

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

中文

Before Use

• INFORMATION ............................................................ E-2

Usage

• USING THE REMOTE CONTROL............................... E-3

• CONNECTING THE DISPLAY TO EXTERNAL

EQUIPMENT................................................................E-7

• BASIC OPERATIONS ................................................E-12

• SELECTING INPUT MODE .......................................E-14

• OTHER BASIC OPERATIONS .................................. E-16

• WATCHING PICTURES ON THE WIDE SCREEN....E-17

Adjustments

• ADJUSTMENT MENU................................................E-19

• BASIC PROCEDURE OF ADJUSTMENT MENU

OPERATIONS............................................................E-20

• ADJUSTING THE PICTURE ......................................E-21

• ADJUSTING SCREEN POSITION AND SIZE ...........E-27

• ADJUSTING AUDIO...................................................E-28

• OTHER ADJUSTMENTS ...........................................E-29

• INITIALIZATION OF USER ADJUSTMENT VALUE ..E-35

Others

• CLEANING AND MAINTENANCE .............................E-36

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the

display correctly.

Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety

precautions (see the separate "Safety Precautions" manual).

Keep this manual where the user can see it easily.

* Installation and removal require special expertise. Consult your product dealer for details.

* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and

"color" will be displayed for all other models.

The notation used in this users' manual is "color".

Contents

Page Page

USER'S MANUAL

(Precautions and Adjustment Methods)

WIDE PLASMA DISPLAY

MHD01661-02_E.book 1 ページ２００４年１２月２２日　水曜日　午後５時１５分

E-2

INFORMATION

• Receptacle

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you

will need to have it replaced. Contact your dealer for more information.

• Have the display inspected and cleaned by your dealer at regular intervals.

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a

prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly

displayed for long periods. (See P. E-33.)

• Extremely high-precision technology has been used in the manufacture of the plasma display panel, with the effective pixel elements

exceeding 99.99%. Please be aware, however, that fewer than 0.01% of the pixels may be missing or remain constantly lit.

• Some models are fitted with a radiator fan to prevent the display’s internal temperature from rising during operation. Be careful of the air

emitted by the radiator fan, as it may be hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote

control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for

more information.

• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that

the power indicator lamp flashes red or green.

• Install the display in a location close to a main power supply outlet, and where the emergency stop button can be easily reached.

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the

power plug from the receptacle to prevent fire or electric shock. Then contact your dealer.

Note

• Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

MHD01661-02_E.book 2 ページ２００４年１２月２２日　水曜日　午後５時１５分

E-3

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

中文

USING THE REMOTE CONTROL

For details, see page Î.

REMOTE CONTROL (for the W/R models)

  button Î E-12

Switches between Power On and Standby.



- (MUTE button) Î E-13

Temporarily mutes the audio.

To return the audio to normal, press this button once again, or press the

1 does the

2 work also.

 3 (DISPLAY button) Î E-16

Press this button to display the input mode, and screen size status.

The status is displayed for about five seconds.



4 (PICTURE MODE button) Î E-16

Use this button to switch the Picture Mode.

 5 (PICTURE MEMORY button) Î E-16

Press this button to recall a Picture Memory.

  (WIDE button) Î E-17

Switches the screen size.

 ) – * (RGB input mode selector button) Î E-15

Selects RGB1 - 2.

 = (RGB3/VIDEO4 imput mode selector button) Î E-14

Selects VIDEO4.



" – $ (Video input mode selector button) Î E-14

Selects VIDEO1 - 3.

 12 (Volume adjustment buttons) Î E-13

Press these buttons to adjust the volume.



; (MENU button) Î E-19–E-35

Press this button to display the menu screen for adjusting the picture and/or the audio.



< (ENTER button) Î E-19–E-35

Press this button to fix the entry in the ADJUSTMENT MENU.

CDEF (Adjustment buttons) Î E-19–E-35

Use these buttons to select the item or adjust the value in the menu screen.

Note

• Functions may not be available with some models and some device options.

MHD01661-02_E.book 3 ページ２００４年１２月２２日　水曜日　午後５時１５分

E-4

USING THE REMOTE CONTROL (Continued)

For details, see page Î.

REMOTE CONTROL (for the U model)

  button Î E-12

Switches between Power On and Standby.



- (MUTE button) Î E-13

Temporarily mutes the audio.

To return the audio to normal, press this button once again, or press the

1 does the

2 work also.

 3 (DISPLAY button) Î E-16

Press this button to display the input mode, and screen size status.

The status is displayed for about five seconds.



4 (PICTURE MODE button) Î E-16

Use this button to switch the Picture Mode.

 5 (PICTURE MEMORY button) Î E-16

Press this button to recall a Picture Memory.

  (WIDE button) Î E-17

Switches the screen size.

 " – & (Video input mode selector button) Î E-14

Selects VIDEO1 - 5.

 ) – * (RGB input mode selector button) Î E-15

Selects RGB1 - 2.



12 (Volume adjustment buttons) Î E-13

Press these buttons to adjust the volume.

 ; (MENU button) Î E-19–E-35

Press this button to display the menu screen for adjusting the picture and/or the audio.



< (ENTER button) Î E-19–E-35

Press this button to fix the entry in the ADJUSTMENT MENU.



CDEF (Adjustment buttons) Î E-19–E-35

Use these buttons to select the item or adjust the value in the menu screen.

Note

• Functions may not be available with some models and some device options.

MHD01661-02_E.book 4 ページ２００４年１２月２２日　水曜日　午後５時１５分

E-5

EnglishDeutschEspañolFrançaisItalianoPortuguês

日本語

Póññêèé

中文

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or

heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

PUTTING BATTERIES IN THE REMOTE CONTROL

(1) To remove the cover, slide it outwards

while pressing it down.

(2) Place two AA batteries in the remote

control. Make sure that the batteries are

properly oriented.

(3) Close the cover until it snaps into place.

PRECAUTIONS

CAUTION

Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/

area.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Do not use rechargeable batteries (Ni-Cd, etc.).

MHD01661-02_E.book 5 ページ２００４年１２月２２日　水曜日　午後５時１５分

E-6

USING THE REMOTE CONTROL (Continued)

Point the remote control at the display’s signal receiver when using it.

Make sure that there are no obstacles between the remote control and the display’s signal receiver.

EFFECTIVE RANGE FOR THE REMOTE CONTROL

Left

Upper

Lower

Right

5 m (Front)

30°

20°

Note

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the

remote control from a different position.

MHD01661-02_E.book 6 ページ２００４年１２月２２日　水曜日　午後５時１５分

Page is loading ...

Fujitsu plasmavision User manual

Brand: Fujitsu

Model: plasmavision

Category: Plasma TVs

Type: User manual

Download PDF

report

Fujitsu plasmavision User manual

Fujitsu plasmavision User manual

Related papers

Other documents