Tote Vision LCD-1512VB User manual

TFT LCD COLOR MONITOR

User’s manual

Model: LCD-1042VB 10.4”

Model: LCD-1211VB 12.1”

Model: LCD-1512VB 15.1”

®

1319 DEXTER AVE N, STE 020

SEATTLE, WA 98109

TEL:206/623-6000

FAX:206/623-6609

2

Thank you for Purchasing this ToteVision product.

Before attempting to operate your video Monitor,

please carefully read this manual.

Content

1. Precautions

2. Package contents

3. Location of Controls

4. Monitor Use

5. Cleaning instructions

6. Adjust the monitor

7. Specifications

14

Item\Model LCD-1042 LCD-1211 LCD-1512

Display 10.4TFT 12.1TFT 15.1TFT

Back light 2 CCFL Type L 8 CCFL 12 CCFL

Input Signal VGA/NTSC/PAL(dual capability)

Dot Format

1024 768 800 600 1024 768

Dot Pitch 0.33mm 0.3075mm 0.297mm

Brightness rating 1300cd/m

2

1250cd/m

2

1700cd/m

2

Number of Pixels 307,200dots 480,000dots 786,432dots

Pixel Configuration Stripe Stripe Stripe

View Angle

80(H), 80(V) 75(H), 75(V) 80(H), 80(V)

Input signal Level 1.0V P-P(Positive) 750hm

Dimensions(mm) 340 x228x54.2

338 278 59.3 389 317 52.1

Operation Temperature

41~104 or 5~40

DC power requirement

for car

Regulated 12VDC, 3.5A, negative ground

PART no. DC-1500 required

Power consumption 30W 25W 52.5W

Connections VGA IN jack, RCA video IN jack, S-video jack,

Weights 3.15kg 2.97kg 3.92kg

Colors 262,144 262,144 16.7M

969 Thomas street, Seattle WA 98109

Tel: 206-623-6000 Fax: 206-623-6609

E-mail: [email protected]

http://www.accessone.com/~tote

3

1. PRECAUTIONS

-This unit has been engineered and made to assure your personal

safety; however, improper use may cause potential electrical shock

and fire hazard.

-For safety do not watch or operate the monitor while driving.

-Do not use this monitor near water such as bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or a swimming pool.

-If the liquid has been spilled into the monitor, unplug the monitor from

the DC jack and refer to qualified service personnel for serving.

-Do not open the monitor. There are no uses service components

inside.

-Use only Totevision approved accessories with this unit.

-Do not expose to extreme hot or cold temperature.

(Storage temp. range: -10 ~+50 )

(Operating temp. range: 5 ~40 )

-When using a DC car cord (optional), be sure to use Totevision

standard car cord, and always turn the power switch off before

starting or stopping the vehicle.

2. Package Contents

A. LCD monitor

B. AC Adapter

4

3. Location of Controls

10.4” Front View

10.4” Rear View

10.4” Vesa View

13

7. SPECIFICATION:

z On screen display for: brightness, contrast, back light, hue & Tint

z S-video capability

z Sunlight readable Very High Brightness LCD panel

z For color applications

z Wide viewing angle

z High contrast ratio

z Active matrix technology eliminates distortion

12

Miscellaneous

Signal Source To choice signal for D-SUB CVBS or S-VIDEO.

Mode Select To choice mode by 640x400 or 720x400.

Reset Select this function can make the monitor have the best

efficiency.

Volume Without audio function.

EXIT OSD Exit the OSD function selection main menu.

Note You don’t need to use AUTO CONFIG function when in the

VIDEO IN mode.

5

12.1” Front View

12.1” Rear View

6

15.1” Front View

15.1” Rear View

11

Function

Auto Adjust Select this function can make the monitor have

the best efficiency.

Auto Colour Select this function can make the color have the

best efficiency.

OSD Menu

Language There are 8 type languages can be selected.

OSD H. Position Pressing moves the OSD menu to right;

Pressing moves the OSD menu to left.

OSD V. Position Pressing moves the OSD menu upward;

Pressing moves the OSD menu downward.

OSD Timer To choice on or off the OSD list timer.

Translucent To choice on or off the OSD list translucent.

10

OSD

Colour

Contrast Adjust the contrast using and buttons.

Brightness Adjust the brightness using and buttons.

Colour Adjust

9300 set current color temperature as 9300K.

6500 set current color temperature as 6500K.

USER

RED Color Red range.

GREEN Color Green Range.

BLUE Color Blue Range.

Picture

H POSITION Pressing moves the display image to right;

Pressing moves the display image to left.

V POSITION Pressing moves the display image upward;

Pressing moves the display image downward.

Sharpness Adjust the sharpness using and buttons.

Phase Adjust input video sampling clock’s phase using and

buttons.

CLOCK Adjust input video sampling clock using and

buttons.

7

4. Monitor use

a. Make sure your video source ( CCD CAMERA,VTR, e.t.c.)

power is on

b. Connect your video source to video input (VGA, RCA video

or S-video)

c. Push the Power Switch ON

5. Cleaning instructions

Turn off the monitor before cleaning the LCD screen. Use a Slightly

damp (not wet) cloth.

Do not use an aerosol spray directly on the LCD screen because

over-spray may cause electrical shock.

8

6. Adjusting the monitor

Control Button

1.Power Switch Pressing this button turns the display system power

on or off.

2.Power LED This Power LED indicates different status when this

unit operates in different modes. It shows the orange

color in standby mode and it shows the green color in

power-on mode.

3.Decrease ( ) This button is used to select OSD control option and

to adjust the decreasing value of selected OSD

control option.

4.Menu / Enter Pressing this button pops up the menus on the screen,

and used to select the control options on the screen.

5.Increase ( ) This button is used to select OSD control option and

to adjust the increasing value of selected OSD

control option.

Power

Switch

Power

LED

Menu / Enter

Decrease

( - )

Increase

( + )

9

Inputs Diagram

1 2 3 4

1 DC IN This is for connecting the power cable.

2 RGB ANALOG IN This can be connected with the D-Sub 15 pin

signal connector.

3 COMPOSITE VIDEO This can be connected to the composite

video-out connector of any video resource.

4 S-VIDEO This can be connected to the S-video-out connector

of any video resource.

Tote Vision LCD-1512VB User manual

This manual is also suitable for

Tote Vision LCD-1512VB User manual

Related papers

Other documents