Tote Vision LCD-1211VB User manual

Type
User manual

This manual is also suitable for

TFT LCD COLOR MONITOR
Users manual
Model: LCD-1042VB 10.4”
Model: LCD-1211VB 12.1”
Model: LCD-1512VB 15.1”
®
1319 DEXTER AVE N, STE 020
SEATTLE, WA 98109
TEL:206/623-6000
FAX:206/623-6609
2
Thank you for Purchasing this ToteVision product.
Before attempting to operate your video Monitor,
please carefully read this manual.
Content
1. Precautions
2. Package contents
3. Location of Controls
4. Monitor Use
5. Cleaning instructions
6. Adjust the monitor
7. Specifications
14
Item\Model LCD-1042 LCD-1211 LCD-1512
Display 10.4TFT 12.1TFT 15.1TFT
Back light 2 CCFL Type L 8 CCFL 12 CCFL
Input Signal VGA/NTSC/PAL(dual capability)
Dot Format
1024 768 800 600 1024 768
Dot Pitch 0.33mm 0.3075mm 0.297mm
Brightness rating 1300cd/m
2
1250cd/m
2
1700cd/m
2
Number of Pixels 307,200dots 480,000dots 786,432dots
Pixel Configuration Stripe Stripe Stripe
View Angle
80(H), 80(V) 75(H), 75(V) 80(H), 80(V)
Input signal Level 1.0V P-P(Positive) 750hm
Dimensions(mm) 340 x228x54.2
338 278 59.3 389 317 52.1
Operation Temperature
41~104 or 5~40
DC power requirement
for car
Regulated 12VDC, 3.5A, negative ground
PART no. DC-1500 required
Power consumption 30W 25W 52.5W
Connections VGA IN jack, RCA video IN jack, S-video jack,
Weights 3.15kg 2.97kg 3.92kg
Colors 262,144 262,144 16.7M
969 Thomas street, Seattle WA 98109
Tel: 206-623-6000 Fax: 206-623-6609
http://www.accessone.com/~tote
3
1. PRECAUTIONS
-This unit has been engineered and made to assure your personal
safety; however, improper use may cause potential electrical shock
and fire hazard.
-For safety do not watch or operate the monitor while driving.
-Do not use this monitor near water such as bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or a swimming pool.
-If the liquid has been spilled into the monitor, unplug the monitor from
the DC jack and refer to qualified service personnel for serving.
-Do not open the monitor. There are no uses service components
inside.
-Use only Totevision approved accessories with this unit.
-Do not expose to extreme hot or cold temperature.
(Storage temp. range: -10 ~+50 )
(Operating temp. range: 5 ~40 )
-When using a DC car cord (optional), be sure to use Totevision
standard car cord, and always turn the power switch off before
starting or stopping the vehicle.
2. Package Contents
A. LCD monitor
B. AC Adapter
4
3. Location of Controls
10.4” Front View
10.4” Rear View
10.4” Vesa View
13
7. SPECIFICATION:
z On screen display for: brightness, contrast, back light, hue & Tint
z S-video capability
z Sunlight readable Very High Brightness LCD panel
z For color applications
z Wide viewing angle
z High contrast ratio
z Active matrix technology eliminates distortion
12
Miscellaneous
Signal Source To choice signal for D-SUB CVBS or S-VIDEO.
Mode Select To choice mode by 640x400 or 720x400.
Reset Select this function can make the monitor have the best
efficiency.
Volume Without audio function.
EXIT OSD Exit the OSD function selection main menu.
Note You don’t need to use AUTO CONFIG function when in the
VIDEO IN mode.
5
12.1” Front View
12.1” Rear View
6
15.1” Front View
15.1” Rear View
11
Function
Auto Adjust Select this function can make the monitor have
the best efficiency.
Auto Colour Select this function can make the color have the
best efficiency.
OSD Menu
Language There are 8 type languages can be selected.
OSD H. Position Pressing moves the OSD menu to right;
Pressing moves the OSD menu to left.
OSD V. Position Pressing moves the OSD menu upward;
Pressing moves the OSD menu downward.
OSD Timer To choice on or off the OSD list timer.
Translucent To choice on or off the OSD list translucent.
10
OSD
Colour
Contrast Adjust the contrast using and buttons.
Brightness Adjust the brightness using and buttons.
Colour Adjust
9300 set current color temperature as 9300K.
6500 set current color temperature as 6500K.
USER
RED Color Red range.
GREEN Color Green Range.
BLUE Color Blue Range.
Picture
H POSITION Pressing moves the display image to right;
Pressing moves the display image to left.
V POSITION Pressing moves the display image upward;
Pressing moves the display image downward.
Sharpness Adjust the sharpness using and buttons.
Phase Adjust input video sampling clock’s phase using and
buttons.
CLOCK Adjust input video sampling clock using and
buttons.
7
4. Monitor use
a. Make sure your video source ( CCD CAMERA,VTR, e.t.c.)
power is on
b. Connect your video source to video input (VGA, RCA video
or S-video)
c. Push the Power Switch ON
5. Cleaning instructions
Turn off the monitor before cleaning the LCD screen. Use a Slightly
damp (not wet) cloth.
Do not use an aerosol spray directly on the LCD screen because
over-spray may cause electrical shock.
8
6. Adjusting the monitor
Control Button
1.Power Switch Pressing this button turns the display system power
on or off.
2.Power LED This Power LED indicates different status when this
unit operates in different modes. It shows the orange
color in standby mode and it shows the green color in
power-on mode.
3.Decrease ( ) This button is used to select OSD control option and
to adjust the decreasing value of selected OSD
control option.
4.Menu / Enter Pressing this button pops up the menus on the screen,
and used to select the control options on the screen.
5.Increase ( ) This button is used to select OSD control option and
to adjust the increasing value of selected OSD
control option.
Power
Switch
Power
LED
Menu / Enter
Decrease
( - )
Increase
( + )
9
Inputs Diagram
1 2 3 4
1 DC IN This is for connecting the power cable.
2 RGB ANALOG IN This can be connected with the D-Sub 15 pin
signal connector.
3 COMPOSITE VIDEO This can be connected to the composite
video-out connector of any video resource.
4 S-VIDEO This can be connected to the S-video-out connector
of any video resource.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Tote Vision LCD-1211VB User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI