Sanyo VA-80LAN User manual

Brand: Sanyo

Model: VA-80LAN

Category: Security cameras

Type: User manual

INSTRUCTION MANUAL

VA-80LAN

Option Board (Network)

English 1

Table of Contents

Table of Contents .............................................................................1

Instruction .........................................................................................2

■ System requirements ......................................................................... 2

Flow of Camera Operation through to Network Operation ..........3

■ User names and operating privileges ............................................... 3

Configuring the TCP/IP Settings on PC .........................................4

Accessing the Camera .....................................................................6

■ Accessing the Camera Using the UPnP Connection

(for Windows XP only) ........................................................................ 7

Monitoring Live Video In The Main Screen ....................................8

Using The Main Screen ....................................................................9

■ How To Use the Control Panel .......................................................... 9

■ Other operations ............................................................................... 10

Establishing Voice Communication .............................................11

Selecting the Operating Conditions .............................................12

NETWORK SETTINGS ....................................................................13

CLOCK SETTINGS .........................................................................14

E-MAIL SETTINGS ..........................................................................15

IMAGE TRANSFER SETTINGS ......................................................17

■ For HTTP connection ....................................................................... 17

■ For FTP connection .......................................................................... 18

SCHEDULE SETTINGS ..................................................................21

■ SCHEDULE ........................................................................................ 21

■ AUTO MODE SCHEDULE ................................................................. 22

■ HOLIDAY SETTINGS ......................................................................... 23

AUDIO SETTINGS ...........................................................................24

OPTION SETTINGS ........................................................................25

Changing the Camera Settings .....................................................26

Settings List ....................................................................................27

OpenSSL License ...........................................................................31

Specifications..................................................................................33

2 English

Instruction

This option board (Network) is an extension board that allows you to connect Sanyo’s color CCD camera to your

network.

After installing the option board on the camera, you can view live video from the camera using Web browser on your

PC. If you want to view live videos from multiple cameras, install the supplied “VA-SW3050LITE” monitoring software.

■ System requirements

The system requirements for camera operation via network are as follows:

•PC: IBM PC/AT and compatibles

•OS: Windows 2000/Windows XP Home Edition/Windows XP Professional

•CPU: Pentium III (800MHz or higher)

• Memory: 128MB or more

• Network interface: 10Base-T/100Base-TX

• Display card: 1024 x 768 pixels or higher, 16 million colors or higher

• Web browser: Internet Explorer Ver.6.0 or higher

• Voice: Sound card and speakers with 100% DirectX compatibility

Note:

• LAN cable must be CAT-5 or higher, and no more than 100 m (109.4 yds) in length.

• Image may be delayed and/or audio interrupted, depending on the environment of use.

This instruction manual is copyrighted by SANYO Electric Co., Ltd. No materials contained in this manual may be

reproduced in any format without the prior permission of the copyright holder.

Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

The official name for “Windows” used in this manual is Microsoft

Windows

Operating System. In this manual,

note that the word “Windows” refers to both “Microsoft

Windows

2000 Operating System” and “Microsoft

Windows

XP Operating System”.

Intel and Pentium are registered trademarks or trademarks of Intel Corporation and its subsidiaries in the United

States and other countries.

IBM and IBM PC/AT are trademarks of International Business Machines Corporation.

UPnP is a trademark of UPnP Implementers Corporation, which is established by the UPnP Forum SC.

Java is a trademark of Sun Microsystems, Inc.

All other brands and product names in this manual are the registered trademarks or trademarks of their respective

owners.

English 3

Flow of Camera Operation through to Network Operation

For detailed instructions on individual procedures, refer to the pages shown below.

■ User names and operating privileges

Two types of user name shown below can access the camera and are authenticated by password during the login

process.

The operations that the user can perform for the camera depend on the user name used to access the camera.

If a “guest” user tries to perform an operation not included in his privilege, the authentication dialog appears. In this

dialog, entering the user name and password for an administrative user (“admin”) will enable the user to perform all

operations.

The number of users who can access simultaneously

• Up to 16 users can access the camera simultaneously.

• Whatever the number of users accessing the camera simultaneously, only one user can access the

camera as an administrative user (“admin”).

Note:

Up to 16 users can access the camera simultaneously, however, depending on the environment of use, image and

voice renewal may become slower as the number of connected users increases.

1 Installing the option board on the camera

Refer to the supplied “INSTALLATION MANUAL” for how to install the option board on the camera and

make connection using LAN cables.

Refer to

2 Configuring the TCP/IP settings on PC

Page 4

3 Accessing the camera

Enter your user name and password to access the camera using the Web browser.

Page 6

4 Monitoring live video in the main screen

After accessing the camera, the live video will be displayed on the main screen.

Page 8

For an administrative user, also perform the following procedures.

5 Selecting the operating conditions

Using the [MAIN SETTINGS] screen for an administrative user, configure the detailed

settings for administrative operations.

When you access the camera for the first time, be sure to perform the settings on the

[CLOCK SETTINGS] screen (See page 14).

• You can change the settings stored in the camera remotely through the network

connection (See page 26).

Page 12

guest

Used for general access. Operations are limited to monitoring the live video. Any operations on the

configuration screens are not allowed.

admin

Used for administrative access. Any camera operations and configurations can be made through the

Web browser.

4 English

Configuring the TCP/IP Settings on PC

Perform the appropriate TCP/IP settings on your PC in accordance with your operating system.

(The following setting example is for Windows XP.)

In the [Control Panel], click [Network and

Internet Connections].

The [Network and Internet Connections] screen

appears.

Click [Network Connections].

The [Network Connections] screen appears.

The LAN interface (Ethernet adapter)

configurations appear in the [LAN or High-Speed

Internet] section.

Right-click on the LAN interface

(Ethernet adapter) configuration used

for accessing the camera and click

[Properties] in the context menu.

[General] tab appears in the [Local Area

Connection 2 Properties] dialog box.

In the [This connection uses the

following items:] list box, select the

[Internet Protocol (TCP/IP)] check box.

Be sure to confirm that the [Internet Protocol

(TCP/IP)] check box is selected. If the check box

is disabled, select it to enable the option.

Configuring the TCP/IP Settings on PC

English 5

Click [Properties].

[General] tab appears in the [Internet Protocol

(TCP/IP) Properties] dialog box.

Select the [Use the following IP

address:] radio button and complete the

[IP address:], [Subnet mask:] and

[Default gateway:] fields.

Confirm the settings and click the [OK]

button.

This completes the TCP/IP settings. Close all

dialog boxes in the display.

Web browser is required to access the camera. Install

Internet Explorer Ver.6.0 or higher on your PC.

In the cases below, perform the Internet Explorer’s

settings by clicking [Tool] and then [Internet Options].

• When accessing the camera using SSL

encryption for video signal

1 Click the [Advanced] tab.

2 Make sure that the “Use SSL 2.0” and “Use SSL

3.0” options under the “Security” section are

enabled. If disabled, select the options.

• When the video update is unstable

1 Click the [General] tab.

2 Under the “Temporary Internet Files” section, click

the [Settings] button.

3 In the “Amount of disk space to use:” setting, set the

lower value.

• When the Java Script’s “Run Time Error” is

displayed

1 Click the [Advanced] tab.

2 Under the “Browsing” section, disable the “Display a

notification about every script error” option.

3 Enable the “Disable script debugging” option.

Preparing the Web Browser for Accessing

the Camera

6 English

Accessing the Camera

Start the Web browser.

To access the camera, Internet Explorer Ver.6.0 or

higher is required.

Note:

When Internet Explorer is used for accessing the

camera, the number of images sent from the

camera may be limited.

Type the URL for accessing the camera

in the browser’s address bar, and press

[Enter] key.

Type the IP address configured for the camera

following the “http://” characters.

<Example: when the IP address is the factory

setting value>

After accessing the camera, the authentication

dialog appears.

Complete the [User name] and

[Password] fields, and click the [OK]

button.

When accessing the camera for the first time, use

the factory setting values below. Using these

values, you will be logged in as an administrative

user.

User name: admin

Password : admin

After the values for the “User name” and

“Password” fields are validated, the language

selection screen appears.

Note:

For security reasons, change the password

regularly.

To change the password, use the [NETWORK

SETTINGS] screen (see page 13).

Select the language used for display,

and click the [SET] button.

Available languages:

English, French, German, Spanish, Japanese

After selecting the display language, the main

screen appears and the live video from the

camera is displayed in the video display area.

(From the second time onwards, if the language

selection screen is left for longer than 10 seconds,

the last display language is automatically selected

and the main screen appears.)

MEMO:

• After the camera is turned on, it will take

about 1 minute for the camera to be available

for accepting any accesses.

• When you specify the port number for the

camera to a number other than 80, add “:”

(colon) and the port number after the IP

address in specifying the URL.

<Example: when

“81”

is specified for the port>

http://192.168.0.2:81/

• When you enable the [SSL] options, type

“https://” instead of “http://” before the IP

address when specifying the URL (see page

13).

Note:

Also while using the supplied “VA-SW3050LITE”

monitoring software or the separately ordered

“VA-SW3050” recorder/player software, you can access

the camera from Web browser simultaneously.

However, when the user who uses the software

performs one of the following actions, other Web-based

concurrent admin users will be disconnected.

• Camera registration

• Alarm settings

Accessing the Camera

English 7

■ Accessing the Camera Using the UPnP Connection (for Windows XP only)

When your operating system is Windows XP, you can use the UPnP (Universal Plug and Play)

connection to access the camera.

In the UPnP connection, double-clicking the icon for the camera in the [My Network Places] window will

activate the camera access process. Entering the URL is not required.

● To enable the UPnP component

1 In the [Add or Remove Programs] on the Control

Panel, open [Add/Remove Windows Components].

2 Select “Networking Services” and click [Details].

3 Select the check box for the UPnP component in the

list, and click the [OK] button.

• The UPnP component title in the list should be

either “Universal Plug and Play” or “UPnP User

Interface” depending on your PC.

4 After returning to the [Windows Components

Wizard], click the [Next] button.

5 After the wizard completes, click the [Finish] button.

● Configuring the UPnP connection

In the [OPTION SETTINGS] screen, set the [UPnP]

option to “ON” (see page 25).

• The factory setting value is “ON”.

● How to access the camera

1 Open the [My Network Places] window.

The icon for the camera detected on the network

appears in the window.

2 Double-click the icon.

This establishes the connection to the camera, and

the authentication dialog appears.

Display name in the [My Network Places]

window:

SANYO Camera - (camera title)

In the (camera title) section above, the title specified for

the camera in [TITLE] field of the [NETWORK

SETTINGS] screen appears.

Click “Yes” to allow installation of the “ActiveX control”,

which is necessary for the voice function.

MEMO:

• If the attempt to install “ActiveX control” fails,

try again after selecting [Tools] → [Internet

Options] → [Security] tab from the Internet

Explorer and changing the security level to

“Medium” or lower.

• If using WindowsXP SP2, the popup blocker

may be displayed.

Click the information bar to display the popup

block permission menu, then click either

“Temporarily Allow Pop-ups” or “Always Allow

Pop-ups from This Site…”.

If the Security Warning screen

appears

8 English

Monitoring Live Video In The Main Screen

1 Control Panel (See pages 9 - 10)

Used to perform remote operation of the camera.

2 Camera title (See page 13)

The camera title specified in the [NETWORK

SETTINGS] screen is displayed.

The color of the title changes according to the status

of alarm detection.

MEMO:

• When the camera title is in orange, no other

alarms will be processed. When the alarm image

has been sent or the condition that the alarm

image cannot be sent lasts longer than five

minutes, the camera title returns to normal

display (white).

• When the setting for the camera title is blank, the

letters “ALARM” are displayed (in red or orange).

3 Video display area

The live video from the camera is displayed.

4 DATE (See page 14)

The date and time specified in the [CLOCK

SETTINGS] screen is displayed.

5 Capture button (See page 10)

Displays the still image in a separate window.

6 Voice control buttons (See page 11)

Allows you to enable or disable the voice

input/output (send/receive ON/OFF)

respectively as well as adjust the volume.

7 Remote alarm button (See page 10)

Used to control the alarm output from the camera

remotely.

8 Close button

Click this button to terminate the connection to the

camera and close the screen.

261 3 54 7 8

White Normal

Red

While alarm is detected or during

recording

Orange

While sending or waiting for sending the

alarm image recorded on the camera to

the VA-SW3050 (HTTP) or FTP server

(FTP)

English 9

Using The Main Screen

■ How To Use the Control Panel

Operations in the control panel are limited to an administrative user (admin).

Control Panel

1 Camera control buttons

2 ZOOM

The slide bar is used to select the desired zoom magnification.

In addition, clicking the (WIDE)/ (TELE) button allows

you to select desired zoom magnification. Pressing and holding

the (WIDE)/ (TELE) button consecutively changes the

zoom magnification.

MEMO:

When the electronic zoom function (EL ZOOM) is enabled on the

camera and the zoom magnification reaches the maximum value

of optical zoom (x30), clicking the button further activates

the electronic zoom function.

3 RESOLUTION

Specifies the video resolution at seven levels.

MEMO:

The DFFC (Dynamic Field/Frame Conversion) function detects

movements in the object according to changes in brightness and

automatically switches from frame to field mode. When the field

mode is switched to, vertical resolution deteriorates to some

degree, however, there is less jaggedness of moving object's

edge.

(If the change in brightness is too small, DFFC may not

function.)

Changes the camera orientation toward the

direction indicated by arrow mark.

(The camera control buttons cannot be

operated while the camera configuration

menu is displayed.)

• Clicking the video image changes the

camera’s orientation so that the point

where you click is located at the

center of the image.

Scans the monitored area end to end

vertically or horizontally for respective

buttons, and stops at the current camera

position.

Starts the sequence, auto-panning, or tour

action, respectively.

Performs the one-push auto focus function.

Displays the on-screen camera configuration

menu.

Displays the next screen of the configuration

menu or executes the command.

Using The Main Screen

10 English

4 PICTURE QUALITY

Specifies the video quality at five levels.

Note:

If [PRE/POST] is set at other than “0%/100%” on the

[IMAGE TRANSFER SETTINGS] screen, the values

of [RESOLUTION] and [PICTURE QUALITY] cannot

be changed.

5 Calling the preset positions

When you call the preset number higher than 8,

select the number from the pull-down menu and

click the [GO] button.

6 Registering the preset position

You can register the current camera orientation

along with the zoom and focus settings as the preset

position.

To register the preset position, select the number to

be used for current setting from the pull-down menu

and click the [MEMORY] button.

7 DAY/NIGHT (only for the cameras with this

function)

Allows you to change the DAY/NIGHT switching

conditions configured using the camera menu.

8 AUX

These buttons are reserved for additional functions.

The function corresponding to the number selected

in the pull-down menu will be performed. The

function allocated to respective numbers depends

on the camera models.

9 [MAIN SETTINGS] button (See page 12)

Displays the menu buttons for an administrative user

(“admin”).

■ Other operations

1 Viewing and saving still images (Capture

button)

The capture button displays the still image at the

moment of clicking the button in a separate window.

• While displaying the still image, the live video in

the main screen continues to be shown as a

moving picture.

• To save the still image, right-click on the still

image to be saved to display context menu and

select “Save As.”

• To close the window displaying the still image,

click [Close].

2 Using the alarm output (Alarm remote

button)

When the ALARM OUT2 option is set to “REMOTE”

on the camera, you can operate the alarm output

remotely.

Clicking the alarm remote button initiates the alarm

output. After the duration specified in the setting on

the camera, the output stops automatically. While

the alarm is being output, the alarm remote button is

displayed in red.

3 Changing the orientation of the camera

lens

Clicking the image changes the orientation of the

camera lens so that the clicked point moves to the

middle of the screen.

Note:

The clicked point may not move to the middle of the

screen depending on the tilt angle.

For the orientation of the camera

lens and the zoom and focusing

status, these buttons call the

preset position registered in “

Registering the preset position”

below.

AUTO

Switches the video display

automatically between color and

black-and-white depending on

daytime or nighttime brightness.

COLOR

Always displays the color video

image.

B/W

Always displays the

black-and-white video image.

English 11

Establishing Voice Communication

You can establish bi-directional voice communication between the camera and PC.

You can view live video with voice because the voice

picked up by the microphone on the camera side is

output to the PC speakers.

You may talk to the camera side because the voice

picked up by the microphone on the PC side is output to

the camera speakers.

Only administrative users can talk PC

→ Camera.

Connect a microphone and speakers respectively to

the MIC IN and SPEAKER OUT.

Then make sure the following preparations are

completed before operating the voice control buttons for

conducting voice communication.

• A sound card that enables voice output is

installed in the PC (see page 2).

• Voice input/output conditions are configured

using the [AUDIO SETTINGS] screen (see

page 24).

Note:

If voice output from the camera speakers is low,

set “Microphone Boost” to the PC microphone

by the following procedure

(the configuration

procedure and display names may differ depending on

the environment of use).

1 Open the [Sounds and Audio Devices] window from

the Control Panel.

2 Select the [Voice] tab and click the [Volume...] button

under [Voice playback].

3 In the [Volume Control] window, select [Properties]

from the Options menu. Select the “Mic Volume”

check box under [Show the following volume

controls:] and click [OK].

4 Click the [Advanced] button under [Mic Volume] (if

no [Advanced] button is shown, select [Advanced

Controls] from the Options menu).

5 In the [Advanced Controls for Mic Volume] window,

select the “Microphone Boost” check box.

Note:

Voice may be prone to interruption depending on the

line conditions. In such cases, adjust the “NETWORK

SPEED” value on the [NETWORK SETTINGS] screen.

In order to operate these buttons, configure the

[AUDIO INPUT]/[AUDIO OUTPUT] setting on

the [AUDIO SETTINGS] screen to “ON”.

1 Voice transmission switch button

(“admin” only)

Transmits voice from the PC microphone to the

camera side.

Note:

Transmission of voice is limited to one administrative

user (admin) at a time.

2 Voice output switch button

Outputs voice from the camera side to the PC.

Note:

When voice output to PC is ON, the maximum

number of simultaneous accesses to the camera is

16.

3 Volume adjustment

The volume adjust slide bar can be used to adjust

the output volume on the PC side.

Voice control buttons

Voice transmission ON

Voice transmission OFF

Voice output ON

Voice output OFF

321

12 English

Selecting the Operating Conditions

(“admin” only)

When you click the [MAIN SETTINGS] button on the control panel, the menu buttons for an

administrative user (“admin”) are displayed. Clicking each button displays the corresponding

configuration screen.

1 NETWORK (See page 13)

Used for configuring the communication settings

with the camera.

• For the network configurations, contact your

network administrator.

2 CLOCK (See page 14)

Used for configuring the settings related to date and

time.

Be sure to configure the date and time settings

before starting the camera operation through the

network.

3 E-MAIL (See page 15)

Used for configuring the alarm notification e-mail

preferences. You can receive the alarm notification

e-mail when the alarm condition is detected or

receive the e-mails at certain interval. In either case,

the image can be attached to the e-mail.

4 TRANSMISSION (See pages 17 - 20)

Used for configuring the recording preferences

when recording the live video using the recorder

software.

You can select the image transfer mode either from

“HTTP” or “FTP”.

5 SCHEDULE (See pages 21 - 23)

Used for configuring the scheduling preferences,

including alarm notification, alarm image transfer in

the FTP mode, alarm image transfer using the timer,

and auto-mode setting of the camera.

This menu is also used to set a desired date as

holiday.

6 AUDIO (See page 24)

Used for configuring the voice communication.

Configure the audio settings if you want to listen to

voice from the camera side or send voice from the

PC microphone to the camera side.

7 OPTION (See page 25)

Used for updating the firmware or resetting all the

values to the factory settings.

8 BACK

Returns to the main screen displaying the live video.

MEMO:

For details on the setting preferences, factory settings

and restriction on the number of characters, refer to the

“Settings List” (on pages 27 - 30).

English 13

NETWORK SETTINGS

(“admin” only)

1 TITLE

Specifies the camera title.

The title specified here appears in the main screen

and is inserted into the alarm notification e-mail.

The title can be up to 16 alphanumeric characters.

2 IP ADDRESS

Select the method for configuring the camera IP

address.

3 SUBNET MASK

When the [IP ADDRESS] setting is “FIX”, enter the

subnet mask.

4 GATEWAY

When the [IP ADDRESS] setting is “FIX”, enter the

gateway.

5 MAC ADDRESS

The MAC address of the camera is displayed

automatically.

6 DNS

When the [IP ADDRESS] setting is “DHCP”, select

the method for configuring the DNS server address.

7 DNS SERVER ADDRESS

When the [DNS] setting is “FIX”, enter the DNS

server address.

8 SSL

Select “ON” when you want to use the SSL

encryption for the video signal.

9 PORT NUMBER

The default value depends on the preferences

specified in the [SSL] setting above.

You can assign a value between 1 and 65535 to the

SSL port number.

Note:

Set the port number in the range of “1 – 65535” but

make sure that it doesn’t overlap with the [AUDIO

PORT NUMBER] on the [AUDIO SETTINGS]

screen.

F PASSW O R D

Specify the login password according to each user

name (guest/admin).

MEMO:

When you enter a blank “guest” password (no

password is specified), the authentication process

for accessing the camera will be omitted.

G NETWORK SPEED

Select the data transfer speed in consideration of

the network environment.

H [SET] button

After completing the settings, click this button to

confirm the settings.

To reflect the settings, use the Close button to

terminate the camera connection, and then access

the camera again.

FIX

Manually configure the IP address.

→ Enter the IP address.

DHCP Automatically allocates the IP address.

FIX

Manually configure the DNS server

address.

→ Enter the DNS server address.

DHCP

Automatically allocates the DNS server

address.

SSL (OFF) 80

SSL (ON) 443

14 English

CLOCK SETTINGS

(“admin” only)

1 CLOCK SET

Set the date and time for the clock built into the

camera.

2 TIME ZONE

Selects the time zone where the camera is used.

3 DAYLIGHT SAVING MODE

(SUMMER TIME MODE)

Sets the summer time switching mode.

When “MANUAL” is selected, the summer time

manual setting screen is displayed.

4 CLOCK ADJUST

Can be used to adjust date and time automatically.

5 NTP settings

The following configurations can be made only when

the [CLOCK ADJUST] preference is set to “ON

(NTP)”.

• TIME TO SYNCHRONIZE

Specify the time for performing the

automatic clock adjustment.

• REFRESH MANUALLY

When you adjust date and time manually,

click the [REFRESH] button to make

adjustment.

• NTP SERVER ADDRESS

Enter the domain name or IP address of

the NTP server used for retrieving the

date and time information.

•LOG

Displays the date and time for the

automatic clock adjustment last

performed.

6 [SET] button

After completing the settings, click this button to

confirm the settings.

If you change the setting on the [TIME ZONE] or

[DAYLIGHT SAVING MODE (SUMMER TIME

MODE)] preference, the connection will be

automatically disconnected, and after about

20 seconds it will be established again.

[REFRESH] button

NO USE

Do not set summer time.

AUTO

Automatically switches between

standard time and summer time

according to the [TIME ZONE] setting.

MANUAL

Used when manually setting the start

and finish dates and times of summer

time.

OFF

Automatic clock adjustment is not

used.

ON (NTP)

Adjusts the clock automatically by

retrieving the date and time

information from the NTP server.

Adjustment will be made at the

following timing:

• When you turn the camera on

• The time you specified in the

[TIME TO SYNCHRONIZE]

preference (5) (Daily)

Performs the automatic clock

adjustment during login process by

retrieving the date and time

information from the PC used for

accessing the camera.

English 15

E-MAIL SETTINGS

(“admin” only)

1 SEND MESSAGE

When sending the e-mail, set this value to

“ON”.

2 Mail server configuration

The following mail server information is

specified in these setting items.

• SMTP SERVER ADDRESS

(domain name or IP address)

Note:

When you specify the domain name, also

specify the DNS of your network.

• SMTP PORT NUMBER

(port number used for communicating with

the SMTP server)

3 USER MAIL ADDRESS

Specifies the sender’s e-mail address.

4 RECIPIENT MAIL ADDRESS

Specifies the recipient’s e-mail address to

which the e-mail is sent. You can specify up

to five e-mail addresses.

1 Type the recipient’s e-mail address and

check the check box to the left of the

e-mail address field.

2 When you want to attach the image file to

the e-mail, check the check box for the

recipient under the [ATTACH IMAGE] title.

5 AUTHENTICATION settings

When authentication is required for sending e-mails,

configure the following settings:

• AUTHENTICATION

•USER ID

•PASSWORD

• POP3 SERVER ADDRESS

(domain name or IP address)

E-MAIL SETTINGS (“admin” only)

16 English

6 ALARM

Specifies the settings of the alarm notification e-mail

sent when the alarm condition is detected.

1 Alarm notification e-mail preference

2 Editing e-mail message

You can specify your own subject and comments

inserted into the alarm notification e-mail. The

camera title, date and time of the detected alarm

condition, and the IP address of the camera are

automatically inserted into the notification e-mail as

default information.

• SUBJECT:

Specifies the e-mail subject (up to 32

characters) displayed at the top of the

e-mail message.

•TEXT:

Specifies your additional comment (up to

64 characters) appended after the default

information.

7 TIMER

Specifies the preferences for sending notification

e-mail using the timer.

E-mails are sent automatically at the interval

specified in [TX RATE].

1 E-mail operation preferences

2 Editing e-mail message

You can specify your own subject and comments

inserted into the notification e-mail. The camera title,

date and time of e-mail transmission, and the IP

address of the camera are automatically inserted

into the notification e-mail as default information.

• SUBJECT:

Specifies the e-mail subject (up to 32

characters) displayed at the top of the

e-mail message.

•TEXT:

Specifies your additional comment (up to

64 characters) appended after the default

information.

3 TX RATE

Specifies the interval for sending notification

e-mails.

8 [SET] button

After completing the settings, click this button

to confirm the settings.

MEMO:

When “SCHEDULE” is selected for the [ALARM] or

[TIMER] option, specify the duration for the e-mail to be

sent and set the [ALARM (SMTP)]/[TIMER (SMTP)] to

“ON” on the SCHEDULE SETTINGS screen (see page

21).

OFF

Disables the alarm notification

e-mail.

Sends the alarm notification

e-mail when the alarm condition

is detected.

SCHEDULE

Sends the alarm notification

e-mail if the alarm condition is

detected during the scheduled

time.

OFF

Disables the timer used for

sending the notification e-mails.

Sends the notification e-mails

using the timer.

SCHEDULE

Sends the notification e-mails

using the timer only during the

scheduled time.

English 17

IMAGE TRANSFER SETTINGS

(“admin” only)

■ For HTTP connection

When you want to record or play the video in HTTP mode, use the separately ordered “VA-SW3050”

recorder/player software. The recording configuration will be made on the VA-SW3050 screen.

When the alarm settings are configured on “VA-SW3050”, the HTTP mode is automatically selected in

the [IMAGE TRANSMISSION] setting and the FTP mode cannot be used.

1 IMAGE TRANSMISSION

Set the image transfer mode to “HTTP”.

2 LIVE/NORMAL RECORD

Sets the image conditions as well as

activates/deactivates the voice recording for

live video and normal recording.

•RESOLUTION

•QUALITY

• AUDIO

Note:

When the [AUDIO INPUT] setting on the

[AUDIO SETTINGS] screen is configured to

“OFF”, [AUDIO] cannot be configured.

3 ALARM

1 Sets the image conditions as well as

activates/deactivates the voice recording

for alarm recording.

•RESOLUTION

•QUALITY

• AUDIO (see the “Note” above.)

2 Select the [BUFFER SIZE] option for

specifying the buffering capacity for

recording each alarm image. According to

the value you select, perform the following

settings:

One alarm image set containing both the pre- and

post-alarm images is stored in the camera, and then

the alarm image set is transferred one by one to the

“VA-SW3050” software.

Note:

If [PRE/POST] is set at other than “0%/100%”, the

[LIVE/NORMAL RECORD (2)] setting cannot be

changed.

When the alarm is detected, only the post-alarm

images will be transferred to the “VA-SW3050”

software. The transfer speed depends on the

network environment.

4 [SET] button

After completing the settings, click this button to

confirm the settings.

When the [BUFFER SIZE] setting is set from

“0.5MB to 8MB”

PRE/

POST

Configures the recording capacity ratio

between the pre- and post-alarm image

recordings.

RATE

Configures the recording rate for the

alarm image.

When the [BUFFER SIZE] setting is set to “OFF”

DURATION

Specifies the duration of each alarm

image to transfer (During this

duration, no other alarms can be

processed for transferring the alarm

image).

IMAGE TRANSFER SETTINGS (“admin” only)

18 English

■ For FTP connection

1 IMAGE TRANSMISSION

Set the image transfer mode to “FTP”.

2 Configuring the FTP information

The following FTP information is specified in

these setting items.

• PORT NUMBER

Please set the same number as the

control port number configured on the

server side. Normally “21” is set.

Note:

Do not set 3000 - 5000, 10000, 10001,

and 38214.

• SERVER ADDRESS

Note:

When you specify the domain name, also

specify the DNS of your network.

•USER ID

•PASSWORD

•FTP PASSIVE

IMAGE TRANSFER SETTINGS (“admin” only)

English 19

3 ALARM

1 Configures the operating conditions and

camera ID for alarm image transmission.

•ALARM

Configures the alarm image transmission.

• CAMERA ID

This is inserted to the file name of the

alarm image. It is also used as the

name of the folder created on the server

side.

Note:

If the CAMERA ID is not configured,

“sanyo” and “alarm” are substituted as

the file name and folder name

respectively.

•OVERWRITE

Configures whether or not to overwrite

file data transmitted to the FTP server.

Note:

Voice cannot be included in the alarm

recording if the image transfer mode is

“FTP”.

2 Configures the image format used for

alarm image transmission.

•RESOLUTION

•QUALITY

3 Select the [BUFFER SIZE] option for

specifying the buffering capacity for

recording each alarm image. According to

the option you selected, perform the

following settings:

One alarm image set containing both the

pre- and post-alarm images is stored in the

camera, and then the alarm image set is

transferred one by one to the FTP server.

Note:

Depending on the shooting conditions, the

number of images that are transferred will

differ.

When the alarm is detected, only the

post-alarm images will be transferred to

the FTP server at the interval you specified

in the [TX RATE] setting. Transfer may not

end within the set time because

communication speed may differ

depending on the network or FTP server

environment.

OFF

Disables the alarm image

transmission.

Enables the alarm image

transmission.

SCHEDULE

Sends the alarm image

only during the scheduled

time.

OFF

Stores all files without conducting

overwrite (date and time

information is displayed in the file

name).

Overwrites (date and time

information is not displayed in the

file name).

When the [BUFFER SIZE] setting is set

from “0.5MB to 8MB”

PRE/

POST

Configures the recording capacity

ratio between the pre- and

post-alarm image recordings.

RATE

Configures the recording rate for the

alarm image.

When the [BUFFER SIZE] setting is set to

“OFF”

DURATION

Specifies the duration of each

alarm image to transfer

(During this duration, no other

alarms can be processed for

transferring the alarm image).

TX RATE

Configures the interval for

transferring the alarm image

(Select a value shorter than

the [DURATION] setting).

Page is loading ...

Sanyo VA-80LAN User manual

Brand: Sanyo

Model: VA-80LAN

Category: Security cameras

Type: User manual

Download PDF

report

Sanyo VA-80LAN User manual

Sanyo VA-80LAN User manual

Related papers

Other documents