Contec CPS-CAB-S01 Owner's manual

Brand: Contec

Model: CPS-CAB-S01

Type: Owner's manual

Contec CPS-CAB-S01 is a series of cables designed to connect FANUC CNC and CONPROSYS series CNC communication support controllers. They come in three different lengths: 1000mm, 3000mm, and 5000mm, and feature a 20-pin half-pitch connector and a 9-pin D-SUB connector. The cables are shielded and have a conductor composition of 7pcs/0.127mm UL20276. They are suitable for use in industrial automation and other applications requiring reliable data transmission between CNC controllers.

1 CPS-CAB-S01-1, CPS-CAB-S01-3, CPS-CAB-S01-5

CONPROSYS Series

CPS-CAB-S01-1, CPS-CAB-S01-3, CPS-CAB-S01-5

User’s Guide

CONTEC CO., LTD.

CPS-CAB-S01-1, CPS-CAB-S01-3, and CPS-CAB-S01-5 are cables to connect the FANUC CNC and

the CONPROSYS series CNC communication support controller(s).

External Dimensions

Specifications

Item Specifications

Connector used

20-pin half-pitch connector PCR-E20FS+[HONDA] or equivalent

9-pin D-SUB connector 17JE-13090-02(D1)A [DDK] or equivalent

Cable

10 core shield cable (5pair). Conductor size: AWG#28

Conductor composition: 7pcs/0.127mm UL20276

Weight

CPS-CAB-S01-1:100g (Max.), CPS-CAB-S01-3:200g (Max.), CPS-CAB-S01-5:300g (Max.)

Connection Diagram

The shell of 9-pin D-SUB connector is unconnected.

20 10

[mm]

CPS-CAB-S01-1 1000mm (-0% +5%)

CPS-CAB-S01-3 3000mm (-0% +5%)

CPS-CAB-S01-5 5000mm (-0% +5%)

32 39

32.2

20-pin half pitch connector

CN1 pin No. CN2 pin No.

RD 1 SD 3

0V 2 SG 5

DR 3

0V 4

CS 5

0V 6

CD 7

0V 8

N.C 9

+24V 10

SD 11 RD 2

0V 12

ER 13 CD 1

0V 14 ER 4

RS 15 DR 6

0V 16

N.C 17 RS 7

(+5V) 18 CS 8

+24V 19

(+5V) 20 RI 9

Shell - Shell -

9-pin D-SUB connector

CPS-CAB-S01-1, CPS-CAB-S01-3, CPS-CAB-S01-5 User’s Guide

CONTEC CO., LTD. May 2017 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

Japanese http://www.contec.co.jp/

English http://www.contec.com/ NA05672 (LYVB051)

Chinese http://www.contec.com.cn/ [05292017]

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

Notes!

Caution

- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, break or be damaged.

- Do not insert or remove the cable while the power of the controller is on. Failure to observe this precaution may cause malfunction,

overheat, or break.

- Insert or remove the cable straight. Otherwise, the connector part may be damaged or distorted.

- The specifications of this product are subject to change without notice for quality improvement. When using the product continuously,

always check the latest information on Contec website.

- This document must accompany the product upon assigning or transferring.

- No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC.

- All relevant issues have been considered in the preparation of this document. Should you notice an omission or any questionable item in

this document, please contact your retailer.

Disclaimer

- We will bear no responsibility for any malfunction or damages from fire, an earthquake, flood, a lightning strike, and other acts of nature,

environmental pollution, abnormal voltage, or incorrect usage.

- We will bear no responsibility if the product is damaged by connecting with inappropriate or not specified equipment.

- The contents of the document have been carefully observed. However, a user might find some details, states, variations are insufficient.

Moreover, the description of setting or usage might not cover any unpredictable issues.

- The information in this document is subject to change without notice or commitment. Regardless of expressed or implied,

we will bear no responsibility for neither the contents of the document nor accuracy, completeness, or sufficiency.

- We will bear no responsibility if the product is not used in accordance with the defined installation, condition and specification, or a user

fails to follow the regulations, the warnings provided in the instructions, manual or the like of the product.

- We will bear no responsibility if the malfunction or damage occurs due to inappropriate handling of the product by user or any part other

than our company (any “third party”), or results from dropping or bumping during transportation and relocation after purchase.

- We will

bear no responsibility if the malfunction or damage occurs due to inappropriate storage or handling, as well as the careless,

negligent or other improper actions by user or any third party.

- We will

bear no responsibility if the malfunction or damage is caused by hardware and/or software which is not the specified product.

- Do not modify the product. We will bear no responsibility for failures or damages caused by remodeling by non-approved engineers.

- Even during the warranty period, the warranty will not apply in this case that regardless of whether a request is made within the warranty

period, we disclaim any indirect or consequential damage (including any opportunity loss, compensation for any business-related damages),

deterioration or loss of data or information, damage to anything other than the product, or any other matters not described in this warranty,

incurred by yourself or your customers, due to any malfunction or defect of the product.

- We disclaim all express and implied warranties to the fullest extent permitted by law. If we cannot disclaim implied warranties under

applicable law, then to the extent possible, such implied warranties are limited to the duration of the express warranty.

- The warranty duration of any replaced or repaired product will be that portion of the warranty period remaining on your original product.

Contec CPS-CAB-S01 Owner's manual

Contec CPS-CAB-S01 Owner's manual

Contec CPS-CAB-S01 Owner's manual

Related papers

Other documents