Braeburn Systems 165 User manual

Type
User manual

This manual is also suitable for

®
Model 165
Pub. No. 165-100-003
Construction
Thermostat
Install in Place of Standard Thermostat
During Construction
Fixed Setpoint of 65˚ for Heating Applications
Tamper-proof Design Prevents
Temperature Adjustment
Sturdy Enclosure Protects Switch from Drywall
Dust, Painting and Mudding
Lowers Costs–Can be Reused from Job to Job
Specifications:
Operating Voltage: 18 to 30 VAC
Maximum Current: 1.0 amp
Installation Instructions:
1. Confirm power to heater controls is OFF.
2. Attach first black wire of the 165 construction thermostat
to 24 VAC wire (red).
3. Attach second black wire of the thermostat to the heating
device wire (white) and the fan wire (green) for electric
heat applications.
4. Confirm that wiring is correct and apply power.
24 VAC (red)
Heating Device
(white)
Fan (green) - for
electric heat only
®
Braeburn Systems LLC
2215 Cornell Avenue • Montgomery, IL 60538
Made in China
Technical Assistance: www.braeburnonline.com
866-268-5599
© 2005 Braeburn Systems LLC • All rights reserved.
The
brighter
choice
®
  • Page 1 1
  • Page 2 2

Braeburn Systems 165 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI