midlandusa.com
Midland BT Remote - Page 2
MIDLAND BT Remote
Advanced Remote Control System
Thank you for purchasing the Midland BT Remote advanced wireless remote control system for your Midland intercom.
The Midland BT Remote can be mounted to the handlebar of your motorcycle and control all the functions of your BT intercom devices.
Main features
› Adjustable mounting system
› 3 main function buttons and 2 volume buttons
› Mini USB plug for charging
› Waterproof
If the red LED is ashing and the unit is not plugged into a charger, it means the
battery is low� Please recharge the unit as soon as possible�
BT Remote description
The BT Remote has ve buttons on the front; the three main buttons are multi
function buttons: the “Forward” button(on the top), the “Middle” button and the
“Back” button(on the bottom)� The two small rounded buttons on the front are the
“Volume +” and “Volume -”�
Ensure the BT Remote is fully charged before use� Charge the unit by inserting the
mini USB cable in the charging plug (lift the rubber cover to insert the plug)� You
can use any USB wall charger or use the USB port of your PC� The red LED light
will turn on during charging� When the unit is fully charged, the red LED light will
turn o�
Please note:
Every time the mini USB charging plug is inserted (or detached),
the device is automatically turned o� To use the BT Remote while it is charging, you
should turn the device on when the plug is already inserted�
Low battery indication
Charging batteries
Unit and mounting system description
6 - Midland BT Remote
UK
MIDLAND BT Remote
Advanced Remote Control System
Thank you for purchasing Midland BTRemote wireless remote control system for your Midland intercom.
Midland BTRemote can be fixed on the handlebar of your motorbike to control all the functions of your BTNext, BTX1 and BTX2 intercom devices.
Main features
› Adjustable fixing system
› 3 main function buttons + 2 for volume up and down
› MiniUSB plug for recharging
› Water resistant
Charging batteries
Make sure that the unit is fully charged before use. Charge the unit by inserting
the miniUSB cable in the charging plug (lift the rubber cover to insert the plug).
You can use any USB wall charger like the one in the BTNext, BTX1 or BTX2 box or
use the USB port of your PC. The red LED light will be on during all the charging
time. When the unit is fully charged, the red LED light will be o.
Please note: every time the mini USB recharging plug
is inserted (or detached),
the device is automatically turned o. To use it while it is in charge, you should
turn the device on when the plug is already inserted.
Low battery indication
If the red LED is flashing and the unit is not plugged to a charger, it means the
battery is low. Please recharge the unit as soon as possible
Unit and xing system description
BT Remote description
The BTRemote has five buttons on the front; the main three big buttons are multi
function buttons: the Forward (on the top), the Middle button and the Backward
(on the bottom). The two small rounded buttons on the top are the Volume +
and Volume -
Fixing system description
Midland BTRemote is very easy to fix, just open it and place it on the left handle.
Close it until is quite firm on the handle. To remove it just lift the lock point and
open it.
In the box you will find two ex
tra rubber spacers to be replaced in case your
handle has a dierent size
LED Light
Volume up
Volume down
Forward
Middle
Back
Interchangeable
rubber spacer
Mounting system description
The Midland BT Remote is easy to mount, just open and place it on the handle of
your motorcycle� Close until it is rmly secured to the handle� To remove it, lift the
lock point to open it�
6 - Midland BT Remote
UK
MIDLAND BT Remote
Advanced Remote Control System
Thank you for purchasing Midland BTRemote wireless remote control system for your Midland intercom.
Midland BTRemote can be fixed on the handlebar of your motorbike to control all the functions of your BTNext, BTX1 and BTX2 intercom devices.
Main features
› Adjustable fixing system
› 3 main function buttons + 2 for volume up and down
› MiniUSB plug for recharging
› Water resistant
Charging batteries
Make sure that the unit is fully charged before use. Charge the unit by inserting
the miniUSB cable in the charging plug (lift the rubber cover to insert the plug).
You can use any USB wall charger like the one in the BTNext, BTX1 or BTX2 box or
use the USB port of your PC. The red LED light will be on during all the charging
time. When the unit is fully charged, the red LED light will be o.
Please note: every time the mini USB recharging plug
is inserted (or detached),
the device is automatically turned o. To use it while it is in charge, you should
turn the device on when the plug is already inserted.
Low battery indication
If the red LED is flashing and the unit is not plugged to a charger, it means the
battery is low. Please recharge the unit as soon as possible
Unit and xing system description
BT Remote description
The BTRemote has five buttons on the front; the main three big buttons are multi
function buttons: the Forward (on the top), the Middle button and the Backward
(on the bottom). The two small rounded buttons on the top are the Volume +
and Volume -
Fixing system description
Midland BTRemote is very easy to fix, just open it and place it on the left handle.
Close it until is quite firm on the handle. To remove it just lift the lock point and
open it.
In the box you will find two ex
tra rubber spacers to be replaced in case your
handle has a dierent size
LED Light
Volume up
Volume down
Forward
Middle
Back
Interchangeable
rubber spacer
In the box you will nd two additional sized rubber spacers to use if your handle
bar has a dierent size�