Blodgett BCP-61 Datasheet

Type
Datasheet

This manual is also suitable for

STANDARD FEATURES
Stainless steel construction
Mounted on 6" adjustable legs or with casters for added mobility
Storage for steam table or sheet pans
Capable of being hosed down for cleaning
FLOOR STANDS
for
BCM & BCP COMBI OVENS
FLOOR STANDS
Project
Item No.
Quantity
All data is shown per oven section, unless otherwise indicated.
BLODGETT COMBI
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY P/N 60839 Rev A (7/01)
NOTE: The company reserves the right to make substitutions of components without prior notice
Stand with Runners for all BCP and BCM-61 ovens
Stand with Runners for all BCP and BCM-101 ovens
Stand with Runners for all BCP and BCM-102 ovens
NOTES:
Dimensions are in inches (mm)
Shown with casters, dimensions do not change when ordered with legs in place of casters.
31.6
(803)
34.1(866)
31.6
(803)
25.6 (650)
21.4
(544)
34.1 (866)
21.4
(544)
25.6 (650)
21.4
(544)
42.9 (1090) 30.4 (772)
21.4
(544)
  • Page 1 1

Blodgett BCP-61 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI