Dynamode SSD-KIT Datasheet

Upgrade your Computer’s

Storage Potential.

Are you looking for the very latest 2.5” Hard Disk Drive (HDD) or

Solid State Drive (SSD) upgrade for your existing, 3.5” Drive Bay

Setup? Do you need the updated SATA and Power Cables to

realise the full potential of this new Storage Technology?

The SSD-KIT is a low cost and easy to install mounting and combined

Power solution, allowing either 2.5” Format HDD or SSD Drives to be

correctly and securely mounted into legacy Desktop, Workstation or

Server-based 3.5” Drive Bay slots. Featuring lightweight aluminium guide

rails with multiple slotted fixing points allows literally any legacy 3.5” Drive

Bay to be used for new technology, 2.5” Storage Devices.

Not forgetting your new data and power requirements of these latest

SATA 2.5” Drives, Dynamode also bundle a generous length SATA data

cable, together with the standard ‘molex’ type Power Connector to SATA

power connector – so now no need for expensive Power Supply or

messy, over length Power Cables.

For the complete range visit www.DYNAMODE.com

SSD-KIT

2.5” HDD or SSD conversion for 3.5” Drive Bays

Featuring…

Lightweight aluminium 2.5” guide rails (1 pair)

Ideal for 2.5” HDD or SSD fitment into 3.5” Drive Bays *

Multi-slot design for secure and tailored fit into most systems

Bundled SATA Data Cable

Bundled ‘molex’ to SATA Power Cable

Screw fixings supplied as standard

Add enhanced Storage Potential and reduce costs

Ideal for all systems. Desktops, Workstations and Servers

* Existing HDD or SSD required

Details correct at going to press. E&OE

All Trademarks Acknowled

Everything to get you connected!

2.5” Guide Rails, SATA Data Cable,

Molex Power Adapter and screw fixings

Also available: SSD-RAIL

ABS Plastic 2.5” HDD or SSD

cradle with fixings only